[PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T

Paul Kocialkowski paul.kocialkowski at bootlin.com
Wed May 26 13:28:20 UTC 2021


Hi,

On Wed 26 May 21, 14:00, Hans Verkuil wrote:
> Hi Paul,
> 
> On 15/01/2021 21:01, Paul Kocialkowski wrote:
> > This series introduces support for MIPI CSI-2, with the A31 controller that is
> > found on most SoCs (A31, V3s and probably V5) as well as the A83T-specific
> > controller. While the former uses the same MIPI D-PHY that is already supported
> > for DSI, the latter embeds its own D-PHY.
> > 
> > In order to distinguish the use of the D-PHY between Rx mode (for MIPI CSI-2)
> > and Tx mode (for MIPI DSI), a submode is introduced for D-PHY in the PHY API.
> > This allows adding Rx support in the A31 D-PHY driver.
> > 
> > A few changes and fixes are applied to the A31 CSI controller driver, in order
> > to support the MIPI CSI-2 use-case.
> 
> Besides the compile error for patch 2/16, I also get several other compile errors:
> 
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c: In function ‘sun6i_csi_v4l2_fwnode_init’:
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
>   207 |  ((type *)       \
>       |          ^
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:790:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
>   790 |  ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier,
>       |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
>   207 |  ((type *)       \
>       |          ^
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:811:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
>   811 |  ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier,
>       |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> make[5]: *** [scripts/Makefile.build:272: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o] Error 1
> make[5]: *** Waiting for unfinished jobs....
> make[4]: *** [scripts/Makefile.build:272: drivers/media/platform/rockchip/rkisp1/rkisp1-isp.o] Error 1
> make[3]: *** [scripts/Makefile.build:515: drivers/media/platform/rockchip/rkisp1] Error 2
> make[3]: *** Waiting for unfinished jobs....
> In file included from ./include/media/v4l2-subdev.h:14,
>                  from ./include/media/v4l2-device.h:13,
>                  from drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:19:
> drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c: In function ‘sun8i_a83t_mipi_csi2_v4l2_setup’:
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
>   207 |  ((type *)       \
>       |          ^
> drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:495:8: note: in expansion of macro
> ‘v4l2_async_notifier_add_fwnode_remote_subdev’
>   495 |  ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
>       |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> In file included from ./include/media/v4l2-subdev.h:14,
>                  from ./include/media/v4l2-device.h:13,
>                  from drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:18:
> drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c: In function ‘sun6i_mipi_csi2_v4l2_setup’:
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
>   207 |  ((type *)       \
>       |          ^
> drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:437:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
>   437 |  ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
>       |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Can you rebase this series?

Thanks for letting me know, I'll look into this for the next iteration.

> I also need Acked-by's for patches 1-3 from one of the PHY maintainers, but as
> you mentioned this might need to change as well.
> 
> Was there a reason why I haven't looked at this before? It's quite an old series,
> usually I don't wait for so long. If it was because I was really slow, then I
> apologize and please kick me sooner if you see a review like this take so long.

I'm not sure, but Sakari definitely went over previous interations and made
various comments,so the series definitely hasn't gone unreviewed!

To be honest I also lost momentum on this but I'll be trying to finalize the
series soon, once the discussion on rx/tx handling has concluded.

Cheers,

Paul

> 
> Regards,
> 
> 	Hans
> 
> > 
> > Changes since v4:
> > - Added patch to stop using v4l2_async_notifier_parse_fwnode_endpoints;
> > - Fixed checkpatch strict issues (parenthesis alignment);
> > - Fixed runtime PM call order and disable;
> > - Fixed fwnode_handle_put order;
> > - Brought back phy-names for A31 since it's mandatory according to the generic
> >   PHY binding and needed by the code;
> > - Added collected tags.
> > 
> > Changes since v3:
> > - Fixed single-item phys description in sun6i mipi csi-2 binding;
> > - Fixed variables names in macros using container_of;
> > - Fixed style issue with operators at the end of lines;
> > - Reworked source endpoint/subdev assignment in sun6i-csi to handle
> >   link_validate error case;
> > - Removed unrelated dt change in sun8i-a83t mipi csi-2 driver;
> > - Added collected tags.
> > 
> > Changes since v2:
> > - added Kconfig depend on PM since it's not optional;
> > - removed phy-names for A31 MIPI CSI-2 controller;
> > - removed v3s compatible in the A31 MIPI CSI-2 controller driver;
> > - removed A31 CSI controller single-port binding deprecation;
> > - removed empty dt port definitions;
> > - fixed minor checkpatch warnings;
> > - added collected tags;
> > - added media-ctl output in cover letter.
> > 
> > Changes since v1:
> > - reworked fwnode and media graph on the CSI controller end to have one port
> >   per interface, which solves the bus type representation issue;
> > - removed unused IRQ handlers in the MIPI CSI-2 bridges;
> > - avoided the use of devm_regmap_init_mmio_clk;
> > - deasserted reset before enabling clocks;
> > - fixed reported return code issues (ret |=, missing checks);
> > - applied requested cosmetic changes (backward goto, etc);
> > - switched over to runtime PM for the mipi csi-2 bridge drivers;
> > - selected PHY_SUN6I_MIPI_DPHY in Kconfig for sun6i-mipi-csi2;
> > - registered nodes with mipi csi-2 bridge subdevs;
> > - used V4L2 format info instead of switch/case for sun6i-csi bpp;
> > - fixed device-tree bindings as requested (useless properties, license);
> > - fixed mipi bridge dt instances names;
> > - added PHY API documentation about mode/power on order requirement;
> > - fixed clock error return code in d-phy code;
> > - fixed D-PHY mode check in d-phy code;
> > - added MAINTAINERS entries for the new drivers;
> > - added V4L2 compliance results;
> > - added various comments and rework commit mesages as requested.
> > 
> > Media ctl outputs for the testing setups are available below:
> > 
> > # sun6i-csi + sun6i-mipi-csi2 + ov5648
> > 
> > Media device information
> > ------------------------
> > driver          sun6i-csi
> > model           Allwinner Video Capture Device
> > serial          
> > bus info        platform:1cb0000.camera
> > hw revision     0x0
> > driver version  5.10.0
> > 
> > Device topology
> > - entity 1: sun6i-csi (2 pads, 1 link)
> >             type Node subtype V4L flags 0
> >             device node name /dev/video0
> > 	pad0: Sink
> > 	pad1: Sink
> > 		<- "sun6i-mipi-csi2":1 [ENABLED]
> > 
> > - entity 6: sun6i-mipi-csi2 (2 pads, 2 links)
> >             type V4L2 subdev subtype Unknown flags 0
> >             device node name /dev/v4l-subdev0
> > 	pad0: Sink
> > 		[fmt:unknown/0x0]
> > 		<- "ov5648 0-0036":0 [ENABLED,IMMUTABLE]
> > 	pad1: Source
> > 		[fmt:unknown/0x0]
> > 		-> "sun6i-csi":1 [ENABLED]
> > 
> > - entity 9: ov5648 0-0036 (1 pad, 1 link)
> >             type V4L2 subdev subtype Sensor flags 0
> >             device node name /dev/v4l-subdev1
> > 	pad0: Source
> > 		[fmt:SBGGR8_1X8/2592x1944 at 1/15 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
> > 		-> "sun6i-mipi-csi2":0 [ENABLED,IMMUTABLE]
> > 
> > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865
> > 
> > Media device information
> > ------------------------
> > driver          sun6i-csi
> > model           Allwinner Video Capture Device
> > serial          
> > bus info        platform:1cb0000.camera
> > hw revision     0x0
> > driver version  5.10.0
> > 
> > Device topology
> > - entity 1: sun6i-csi (2 pads, 1 link)
> >             type Node subtype V4L flags 0
> >             device node name /dev/video0
> > 	pad0: Sink
> > 	pad1: Sink
> > 		<- "sun8i-a83t-mipi-csi2":1 [ENABLED]
> > 
> > - entity 6: sun8i-a83t-mipi-csi2 (2 pads, 2 links)
> >             type V4L2 subdev subtype Unknown flags 0
> >             device node name /dev/v4l-subdev0
> > 	pad0: Sink
> > 		[fmt:unknown/0x0]
> > 		<- "ov8865 1-0036":0 [ENABLED,IMMUTABLE]
> > 	pad1: Source
> > 		[fmt:unknown/0x0]
> > 		-> "sun6i-csi":1 [ENABLED]
> > 
> > - entity 9: ov8865 1-0036 (1 pad, 1 link)
> >             type V4L2 subdev subtype Sensor flags 0
> >             device node name /dev/v4l-subdev1
> > 	pad0: Source
> > 		[fmt:SBGGR10_1X10/3264x2448 at 1/30 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
> > 		-> "sun8i-a83t-mipi-csi2":0 [ENABLED,IMMUTABLE]
> > 
> > V4L2 compliance runs are available below:
> > 
> > # sun6i-csi + sun6i-mipi-csi2 + ov5648
> > 
> > v4l2-compliance SHA: not available, 32 bits
> > 
> > Compliance test for sun6i-video device /dev/video0:
> > 
> > Driver Info:
> > 	Driver name      : sun6i-video
> > 	Card type        : sun6i-csi
> > 	Bus info         : platform:camera
> > 	Driver version   : 5.10.0
> > 	Capabilities     : 0x84200001
> > 		Video Capture
> > 		Streaming
> > 		Extended Pix Format
> > 		Device Capabilities
> > 	Device Caps      : 0x04200001
> > 		Video Capture
> > 		Streaming
> > 		Extended Pix Format
> > Media Driver Info:
> > 	Driver name      : sun6i-csi
> > 	Model            : Allwinner Video Capture Device
> > 	Serial           : 
> > 	Bus info         : platform:1cb0000.camera
> > 	Media version    : 5.10.0
> > 	Hardware revision: 0x00000000 (0)
> > 	Driver version   : 5.10.0
> > Interface Info:
> > 	ID               : 0x03000004
> > 	Type             : V4L Video
> > Entity Info:
> > 	ID               : 0x00000001 (1)
> > 	Name             : sun6i-csi
> > 	Function         : V4L2 I/O
> > 	Pad 0x01000002   : 0: Sink
> > 	Pad 0x01000003   : 1: Sink
> > 	  Link 0x0200000d: from remote pad 0x1000008 of entity 'sun6i-mipi-csi2': Data, Enabled
> > 
> > Required ioctls:
> > 	test MC information (see 'Media Driver Info' above): OK
> > 		warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > 	test VIDIOC_QUERYCAP: OK
> > 
> > Allow for multiple opens:
> > 	test second /dev/video0 open: OK
> > 		warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > 	test VIDIOC_QUERYCAP: OK
> > 	test VIDIOC_G/S_PRIORITY: OK
> > 	test for unlimited opens: OK
> > 
> > Debug ioctls:
> > 	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > 	test VIDIOC_LOG_STATUS: OK
> > 
> > Input ioctls:
> > 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > 	test VIDIOC_G/S/ENUMINPUT: OK
> > 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > 	Inputs: 1 Audio Inputs: 0 Tuners: 0
> > 
> > Output ioctls:
> > 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > 	Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 
> > Input/Output configuration ioctls:
> > 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > 	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > 	test VIDIOC_G/S_EDID: OK (Not Supported)
> > 
> > Control ioctls (Input 0):
> > 		warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > 		warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > 		warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > 		warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > 	test VIDIOC_QUERYCTRL: OK
> > 		warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > 		warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > 		warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > 		warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > 	test VIDIOC_G/S_CTRL: OK
> > 		warn: v4l2-test-controls.cpp(555): Gain: returned control value 44 not a multiple of step
> > 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > 	Standard Controls: 15 Private Controls: 0
> > 
> > Format ioctls (Input 0):
> > 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > 	test VIDIOC_G/S_PARM: OK (Not Supported)
> > 	test VIDIOC_G_FBUF: OK (Not Supported)
> > 	test VIDIOC_G_FMT: OK
> > 	test VIDIOC_TRY_FMT: OK
> > 	test VIDIOC_S_FMT: OK
> > 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > 	test Cropping: OK (Not Supported)
> > 	test Composing: OK (Not Supported)
> > 	test Scaling: OK
> > 
> > Codec ioctls (Input 0):
> > 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 
> > Buffer ioctls (Input 0):
> > 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > 		fail: v4l2-test-buffers.cpp(755): q.export_bufs(node, q.g_type())
> > 	test VIDIOC_EXPBUF: FAIL
> > 	test Requests: OK (Not Supported)
> > 
> > Total for sun6i-video device /dev/video0: 45, Succeeded: 44, Failed: 1, Warnings: 1
> > 
> > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865
> > 
> > v4l2-compliance SHA: not available, 32 bits
> > 
> > Compliance test for sun6i-video device /dev/video0:
> > 
> > Driver Info:
> > 	Driver name      : sun6i-video
> > 	Card type        : sun6i-csi
> > 	Bus info         : platform:camera
> > 	Driver version   : 5.10.0
> > 	Capabilities     : 0x84200001
> > 		Video Capture
> > 		Streaming
> > 		Extended Pix Format
> > 		Device Capabilities
> > 	Device Caps      : 0x04200001
> > 		Video Capture
> > 		Streaming
> > 		Extended Pix Format
> > Media Driver Info:
> > 	Driver name      : sun6i-csi
> > 	Model            : Allwinner Video Capture Device
> > 	Serial           : 
> > 	Bus info         : platform:1cb0000.camera
> > 	Media version    : 5.10.0
> > 	Hardware revision: 0x00000000 (0)
> > 	Driver version   : 5.10.0
> > Interface Info:
> > 	ID               : 0x03000004
> > 	Type             : V4L Video
> > Entity Info:
> > 	ID               : 0x00000001 (1)
> > 	Name             : sun6i-csi
> > 	Function         : V4L2 I/O
> > 	Pad 0x01000002   : 0: Sink
> > 	Pad 0x01000003   : 1: Sink
> > 	  Link 0x0200000d: from remote pad 0x1000008 of entity 'sun8i-a83t-mipi-csi2': Data, Enabled
> > 
> > Required ioctls:
> > 	test MC information (see 'Media Driver Info' above): OK
> > 		warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > 	test VIDIOC_QUERYCAP: OK
> > 
> > Allow for multiple opens:
> > 	test second /dev/video0 open: OK
> > 		warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > 	test VIDIOC_QUERYCAP: OK
> > 	test VIDIOC_G/S_PRIORITY: OK
> > 	test for unlimited opens: OK
> > 
> > Debug ioctls:
> > 	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > 	test VIDIOC_LOG_STATUS: OK
> > 
> > Input ioctls:
> > 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > 	test VIDIOC_G/S/ENUMINPUT: OK
> > 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > 	Inputs: 1 Audio Inputs: 0 Tuners: 0
> > 
> > Output ioctls:
> > 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > 	Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 
> > Input/Output configuration ioctls:
> > 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > 	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > 	test VIDIOC_G/S_EDID: OK (Not Supported)
> > 
> > Control ioctls (Input 0):
> > 		warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > 		warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > 		warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > 		warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > 	test VIDIOC_QUERYCTRL: OK
> > 	test VIDIOC_G/S_CTRL: OK
> > 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > 	Standard Controls: 11 Private Controls: 0
> > 
> > Format ioctls (Input 0):
> > 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > 	test VIDIOC_G/S_PARM: OK (Not Supported)
> > 	test VIDIOC_G_FBUF: OK (Not Supported)
> > 	test VIDIOC_G_FMT: OK
> > 	test VIDIOC_TRY_FMT: OK
> > 	test VIDIOC_S_FMT: OK
> > 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > 	test Cropping: OK (Not Supported)
> > 	test Composing: OK (Not Supported)
> > 	test Scaling: OK
> > 
> > Codec ioctls (Input 0):
> > 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 
> > Buffer ioctls (Input 0):
> > 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > 	test VIDIOC_EXPBUF: OK
> > 	test Requests: OK (Not Supported)
> > 
> > Total for sun6i-video device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 6
> > 
> > Paul Kocialkowski (16):
> >   docs: phy: Add a part about PHY mode and submode
> >   phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
> >   phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI
> >     CSI-2
> >   media: sun6i-csi: Stop using the deprecated fwnode endpoint parser
> >   media: sun6i-csi: Use common V4L2 format info for storage bpp
> >   media: sun6i-csi: Only configure the interface data width for parallel
> >   dt-bindings: media: sun6i-a31-csi: Add MIPI CSI-2 input port
> >   media: sun6i-csi: Add support for MIPI CSI-2 bridge input
> >   dt-bindings: media: Add A31 MIPI CSI-2 bindings documentation
> >   media: sunxi: Add support for the A31 MIPI CSI-2 controller
> >   ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support
> >   MAINTAINERS: Add entry for the Allwinner A31 MIPI CSI-2 bridge
> >   dt-bindings: media: Add A83T MIPI CSI-2 bindings documentation
> >   media: sunxi: Add support for the A83T MIPI CSI-2 controller
> >   ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
> >   MAINTAINERS: Add entry for the Allwinner A83T MIPI CSI-2 bridge
> > 
> >  .../media/allwinner,sun6i-a31-csi.yaml        |  88 ++-
> >  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 156 ++++
> >  .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 147 ++++
> >  Documentation/driver-api/phy/phy.rst          |  18 +
> >  MAINTAINERS                                   |  16 +
> >  arch/arm/boot/dts/sun8i-a83t.dtsi             |  26 +
> >  arch/arm/boot/dts/sun8i-v3s.dtsi              |  68 ++
> >  .../platform/rockchip/rkisp1/rkisp1-isp.c     |   3 +-
> >  drivers/media/platform/sunxi/Kconfig          |   2 +
> >  drivers/media/platform/sunxi/Makefile         |   2 +
> >  .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 218 ++++--
> >  .../platform/sunxi/sun6i-csi/sun6i_csi.h      |  65 +-
> >  .../platform/sunxi/sun6i-csi/sun6i_video.c    |  57 +-
> >  .../platform/sunxi/sun6i-csi/sun6i_video.h    |   7 +-
> >  .../platform/sunxi/sun6i-mipi-csi2/Kconfig    |  12 +
> >  .../platform/sunxi/sun6i-mipi-csi2/Makefile   |   4 +
> >  .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c   | 600 ++++++++++++++++
> >  .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h   | 117 +++
> >  .../sunxi/sun8i-a83t-mipi-csi2/Kconfig        |  11 +
> >  .../sunxi/sun8i-a83t-mipi-csi2/Makefile       |   4 +
> >  .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c    |  92 +++
> >  .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h    |  39 +
> >  .../sun8i_a83t_mipi_csi2.c                    | 666 ++++++++++++++++++
> >  .../sun8i_a83t_mipi_csi2.h                    | 197 ++++++
> >  drivers/phy/allwinner/phy-sun6i-mipi-dphy.c   | 164 ++++-
> >  include/linux/phy/phy-mipi-dphy.h             |  13 +
> >  26 files changed, 2651 insertions(+), 141 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
> >  create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
> >  create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
> >  create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
> >  create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
> >  create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig
> >  create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile
> >  create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
> >  create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h
> >  create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
> >  create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h
> > 
> 

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/attachments/20210526/21176f0e/attachment-0001.asc>


More information about the devel mailing list