[PATCH 6/6] staging: comedi: dt2814: Clear stale AI data on detach

[Ian Abbott]

When the Comedi "detach" handler is called, it is possible that an extra
A/D conversion (triggered during termination of a Comedi asynchronous
command) is still in progress.  In that case, the FINISH bit in the
Status register will eventually get set and there will be stale data
waiting to be read from the A/D Data register.  The interrupt handler
will also be called if still connected at the time.  That should all be
mostly harmless, but it would be better to wait for any such conversion
to complete and clear any stale data during the "detach".  Add a custom
"detach" handler `dt2814_detach()` to do that if an interrupt handler
has been set up.  (There is no need to do it if no interrupt handler was
set up because Comedi asynchronous command support is disabled in that
case.)

Signed-off-by: Ian Abbott <abbotti at mev.co.uk>
---
 drivers/staging/comedi/drivers/dt2814.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index d18f9a5a9fb1..ed44ce0d151b 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -346,11 +346,24 @@ static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
+static void dt2814_detach(struct comedi_device *dev)
+{
+	if (dev->irq) {
+		/*
+		 * An extra conversion triggered on termination of an
+		 * asynchronous command may still be in progress.  Wait for
+		 * it to finish and clear the data or error status.
+		 */
+		dt2814_ai_clear(dev);
+	}
+	comedi_legacy_detach(dev);
+}
+
 static struct comedi_driver dt2814_driver = {
 	.driver_name	= "dt2814",
 	.module		= THIS_MODULE,
 	.attach		= dt2814_attach,
-	.detach		= comedi_legacy_detach,
+	.detach		= dt2814_detach,
 };
 module_comedi_driver(dt2814_driver);
 
-- 
2.30.0