[PATCH] staging: media: atomisp: pci: reposition braces as per coding style

Sakari Ailus sakari.ailus at linux.intel.com
Fri Apr 30 16:33:27 UTC 2021


Hi Deepak,

If you're touching all these lines, I might do a little more. Please see
the comments below.

On Fri, Apr 30, 2021 at 09:10:12PM +0530, Deepak R Varma wrote:
> Misplaced braces makes it difficult to follow the code easily. This also
> goes against the code style guidelines. This resolved following checkpatch
> complaints:
> 
> ERROR: open brace '{' following function definitions go on the next line
> ERROR: that open brace { should be on the previous line
> 
> Signed-off-by: Deepak R Varma <drv at mailo.com>
> ---
> 
> Please Note: There are several other checkpatch triggered warnings and
> errors that should be addressed in separate patches.
> 
> 
>  .../staging/media/atomisp/pci/atomisp_csi2.c  |   3 +-
>  .../staging/media/atomisp/pci/sh_css_mipi.c   |  69 +++----
>  .../staging/media/atomisp/pci/sh_css_params.c | 171 ++++++++----------
>  drivers/staging/media/atomisp/pci/sh_css_sp.c | 108 +++++------
>  .../media/atomisp/pci/sh_css_version.c        |   3 +-
>  5 files changed, 157 insertions(+), 197 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2.c b/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> index 060b8765ae96..200f16994f3a 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2.c
> @@ -29,7 +29,8 @@ static struct v4l2_mbus_framefmt *__csi2_get_format(struct
>  	v4l2_subdev_pad_config *cfg,
>  	enum
>  	v4l2_subdev_format_whence

You could have more arguments on the same line up to 80 characters per
line.

> -	which, unsigned int pad) {
> +	which, unsigned int pad)
> +{
>  	if (which == V4L2_SUBDEV_FORMAT_TRY)
>  		return v4l2_subdev_get_try_format(&csi2->subdev, cfg, pad);
>  	else
> diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> index 3f34cc81be87..75489f7d75ee 100644
> --- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> +++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
> @@ -91,7 +91,8 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
>  				 const enum atomisp_input_format format,
>  				 const bool hasSOLandEOL,
>  				 const unsigned int embedded_data_size_words,
> -				 unsigned int *size_mem_words) {
> +				 unsigned int *size_mem_words)
> +{
>  	int err = 0;
>  
>  	unsigned int bits_per_pixel = 0;
> @@ -118,8 +119,7 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
>  	IA_CSS_ENTER("padded_width=%d, height=%d, format=%d, hasSOLandEOL=%d, embedded_data_size_words=%d\n",
>  		     width_padded, height, format, hasSOLandEOL, embedded_data_size_words);
>  
> -	switch (format)
> -	{
> +	switch (format) {
>  	case ATOMISP_INPUT_FORMAT_RAW_6:		/* 4p, 3B, 24bits */
>  		bits_per_pixel = 6;
>  		break;
> @@ -178,12 +178,10 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
>  	/* Even lines for YUV420 formats are double in bits_per_pixel. */
>  	if (format == ATOMISP_INPUT_FORMAT_YUV420_8
>  	    || format == ATOMISP_INPUT_FORMAT_YUV420_10
> -	    || format == ATOMISP_INPUT_FORMAT_YUV420_16)
> -	{
> +	    || format == ATOMISP_INPUT_FORMAT_YUV420_16) {
>  		even_line_bytes = (width_padded * 2 * bits_per_pixel + 7) >>
>  			3; /* ceil ( bits per line / 8) */
> -	} else
> -	{
> +	} else {
>  		even_line_bytes = odd_line_bytes;
>  	}
>  
> @@ -236,7 +234,8 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
>  #if !defined(ISP2401)
>  int
>  ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
> -				       const unsigned int	size_mem_words) {
> +				       const unsigned int	size_mem_words)

Tab after int, should be a space.

> +{
>  	u32 idx;
>  
>  	int err = -EBUSY;
> @@ -246,11 +245,9 @@ ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
>  
>  	for (idx = 0; idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT &&
>  	     my_css.mipi_sizes_for_check[port][idx] != 0;
> -	     idx++)   /* do nothing */
> -	{
> +	     idx++) { /* do nothing */
>  	}

A semicolon suffices here. I guess this could be also written as:

	for (idx = 0; idx < ... & ... != 0; )
		idx++;

As it's easy to just miss the semicolon at the end of the for loop.

> -	if (idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT)
> -	{
> +	if (idx < IA_CSS_MIPI_SIZE_CHECK_MAX_NOF_ENTRIES_PER_PORT) {
>  		my_css.mipi_sizes_for_check[port][idx] = size_mem_words;
>  		err = 0;
>  	}
> @@ -271,7 +268,8 @@ mipi_init(void)
>  int
>  calculate_mipi_buff_size(
>      struct ia_css_stream_config *stream_cfg,
> -    unsigned int *size_mem_words) {
> +    unsigned int *size_mem_words)

I think both arguments might fit on the same line. If not, then the return
type (int) does. I think there are other similar cases.

> +{
>  #if !defined(ISP2401)
>  	int err = -EINVAL;
>  	(void)stream_cfg;
> @@ -346,12 +344,10 @@ calculate_mipi_buff_size(
>  
>  	/* Even lines for YUV420 formats are double in bits_per_pixel. */
>  	if (format == ATOMISP_INPUT_FORMAT_YUV420_8
> -	    || format == ATOMISP_INPUT_FORMAT_YUV420_10)
> -	{
> +	    || format == ATOMISP_INPUT_FORMAT_YUV420_10) {
>  		even_line_bytes = (width_padded * 2 * bits_per_pixel + 7) >>
>  			3; /* ceil ( bits per line / 8) */

You don't need braces here.

> -	} else
> -	{
> +	} else {
>  		even_line_bytes = odd_line_bytes;
>  	}
>  
> @@ -393,7 +389,8 @@ static bool buffers_needed(struct ia_css_pipe *pipe)
>  
>  int
>  allocate_mipi_frames(struct ia_css_pipe *pipe,
> -		     struct ia_css_stream_info *info) {
> +		     struct ia_css_stream_info *info)
> +{
>  	int err = -EINVAL;
>  	unsigned int port;
>  
> @@ -402,8 +399,7 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
>  
>  	assert(pipe);
>  	assert(pipe->stream);
> -	if ((!pipe) || (!pipe->stream))
> -	{
> +	if ((!pipe) || (!pipe->stream)) {

Extra parentheses.

-- 
Kind regards,

Sakari Ailus


More information about the devel mailing list