[PATCH v9 03/13] media: hantro: Use syscon instead of 'ctrl' register

Lucas Stach l.stach at pengutronix.de
Fri Apr 16 10:54:16 UTC 2021


Am Mittwoch, dem 07.04.2021 um 09:35 +0200 schrieb Benjamin Gaignard:
> In order to be able to share the control hardware block between
> VPUs use a syscon instead a ioremap it in the driver.
> To keep the compatibility with older DT if 'nxp,imx8mq-vpu-ctrl'
> phandle is not found look at 'ctrl' reg-name.
> With the method it becomes useless to provide a list of register
> names so remove it.

Sorry for putting a spoke in the wheel after many iterations of the
series.

We just discussed a way forward on how to handle the clocks and resets
provided by the blkctl block on i.MX8MM and later and it seems there is
a consensus on trying to provide virtual power domains from a blkctl
driver, controlling clocks and resets for the devices in the power
domain. I would like to avoid introducing yet another way of handling
the blkctl and thus would like to align the i.MX8MQ VPU blkctl with
what we are planning to do on the later chip generations.

CC'ing Jacky Bai and Peng Fan from NXP, as they were going to give this
virtual power domain thing a shot.

Regards,
Lucas

> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
> Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
> ---
> version 9:
>  - Corrections in commit message
> 
> version 7:
>  - Add Philipp reviewed-by tag.
>  - Change syscon phandle name.
>  
> 
> 
> 
> version 5:
>  - use syscon instead of VPU reset driver.
>  - if DT doesn't provide syscon keep backward compatibilty by using
>    'ctrl' reg-name.
> 
>  drivers/staging/media/hantro/hantro.h       |  5 +-
>  drivers/staging/media/hantro/imx8m_vpu_hw.c | 52 ++++++++++++---------
>  2 files changed, 34 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
> index 6c1b888abe75..37b9ce04bd4e 100644
> --- a/drivers/staging/media/hantro/hantro.h
> +++ b/drivers/staging/media/hantro/hantro.h
> @@ -13,6 +13,7 @@
>  #define HANTRO_H_
>  
> 
> 
> 
>  #include <linux/platform_device.h>
> +#include <linux/regmap.h>
>  #include <linux/videodev2.h>
>  #include <linux/wait.h>
>  #include <linux/clk.h>
> @@ -167,7 +168,7 @@ hantro_vdev_to_func(struct video_device *vdev)
>   * @reg_bases:		Mapped addresses of VPU registers.
>   * @enc_base:		Mapped address of VPU encoder register for convenience.
>   * @dec_base:		Mapped address of VPU decoder register for convenience.
> - * @ctrl_base:		Mapped address of VPU control block.
> + * @ctrl_base:		Regmap of VPU control block.
>   * @vpu_mutex:		Mutex to synchronize V4L2 calls.
>   * @irqlock:		Spinlock to synchronize access to data structures
>   *			shared with interrupt handlers.
> @@ -186,7 +187,7 @@ struct hantro_dev {
>  	void __iomem **reg_bases;
>  	void __iomem *enc_base;
>  	void __iomem *dec_base;
> -	void __iomem *ctrl_base;
> +	struct regmap *ctrl_base;
>  
> 
> 
> 
>  	struct mutex vpu_mutex;	/* video_device lock */
>  	spinlock_t irqlock;
> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> index c222de075ef4..8d0c3425234b 100644
> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> @@ -7,6 +7,7 @@
>  
> 
> 
> 
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/mfd/syscon.h>
>  
> 
> 
> 
>  #include "hantro.h"
>  #include "hantro_jpeg.h"
> @@ -24,30 +25,28 @@
>  #define CTRL_G1_PP_FUSE		0x0c
>  #define CTRL_G2_DEC_FUSE	0x10
>  
> 
> 
> 
> +static const struct regmap_config ctrl_regmap_ctrl = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 0x14,
> +};
> +
>  static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
>  {
> -	u32 val;
> -
>  	/* Assert */
> -	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> -	val &= ~reset_bits;
> -	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> +	regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET, reset_bits, 0);
>  
> 
> 
> 
>  	udelay(2);
>  
> 
> 
> 
>  	/* Release */
> -	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> -	val |= reset_bits;
> -	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> +	regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET,
> +			   reset_bits, reset_bits);
>  }
>  
> 
> 
> 
>  static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
>  {
> -	u32 val;
> -
> -	val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> -	val |= clock_bits;
> -	writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> +	regmap_update_bits(vpu->ctrl_base, CTRL_CLOCK_ENABLE,
> +			   clock_bits, clock_bits);
>  }
>  
> 
> 
> 
>  static int imx8mq_runtime_resume(struct hantro_dev *vpu)
> @@ -64,9 +63,9 @@ static int imx8mq_runtime_resume(struct hantro_dev *vpu)
>  	imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
>  
> 
> 
> 
>  	/* Set values of the fuse registers */
> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
> +	regmap_write(vpu->ctrl_base, CTRL_G1_DEC_FUSE, 0xffffffff);
> +	regmap_write(vpu->ctrl_base, CTRL_G1_PP_FUSE, 0xffffffff);
> +	regmap_write(vpu->ctrl_base, CTRL_G2_DEC_FUSE, 0xffffffff);
>  
> 
> 
> 
>  	clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
>  
> 
> 
> 
> @@ -150,8 +149,22 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
>  
> 
> 
> 
>  static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
>  {
> -	vpu->dec_base = vpu->reg_bases[0];
> -	vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
> +	struct device_node *np = vpu->dev->of_node;
> +
> +	vpu->ctrl_base = syscon_regmap_lookup_by_phandle(np, "nxp,imx8m-vpu-ctrl");
> +	if (IS_ERR(vpu->ctrl_base)) {
> +		struct resource *res;
> +		void __iomem *ctrl;
> +
> +		res = platform_get_resource_byname(vpu->pdev, IORESOURCE_MEM, "ctrl");
> +		ctrl = devm_ioremap_resource(vpu->dev, res);
> +		if (IS_ERR(ctrl))
> +			return PTR_ERR(ctrl);
> +
> +		vpu->ctrl_base = devm_regmap_init_mmio(vpu->dev, ctrl, &ctrl_regmap_ctrl);
> +		if (IS_ERR(vpu->ctrl_base))
> +			return PTR_ERR(vpu->ctrl_base);
> +	}
>  
> 
> 
> 
>  	return 0;
>  }
> @@ -198,7 +211,6 @@ static const struct hantro_irq imx8mq_irqs[] = {
>  };
>  
> 
> 
> 
>  static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
> -static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>  
> 
> 
> 
>  const struct hantro_variant imx8mq_vpu_variant = {
>  	.dec_fmts = imx8m_vpu_dec_fmts,
> @@ -215,6 +227,4 @@ const struct hantro_variant imx8mq_vpu_variant = {
>  	.num_irqs = ARRAY_SIZE(imx8mq_irqs),
>  	.clk_names = imx8mq_clk_names,
>  	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
> -	.reg_names = imx8mq_reg_names,
> -	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
>  };




More information about the devel mailing list