[PATCH 01/14] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

Helen Koike helen.koike at collabora.com
Fri Oct 30 22:44:45 UTC 2020


Hi Paul,

On 10/23/20 2:45 PM, Paul Kocialkowski wrote:
> As some D-PHY controllers support both Rx and Tx mode, we need a way for
> users to explicitly request one or the other. For instance, Rx mode can
> be used along with MIPI CSI-2 while Tx mode can be used with MIPI DSI.
> 
> Introduce new MIPI D-PHY PHY submodes to use with PHY_MODE_MIPI_DPHY.
> The default (zero value) is kept to Tx so only the rkisp1 driver, which
> uses D-PHY in Rx mode, needs to be adapted.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> ---
>  drivers/staging/media/rkisp1/rkisp1-isp.c |  3 ++-
>  include/linux/phy/phy-mipi-dphy.h         | 13 +++++++++++++
>  2 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/media/rkisp1/rkisp1-isp.c b/drivers/staging/media/rkisp1/rkisp1-isp.c
> index 6ec1e9816e9f..0afbce00121e 100644
> --- a/drivers/staging/media/rkisp1/rkisp1-isp.c
> +++ b/drivers/staging/media/rkisp1/rkisp1-isp.c
> @@ -902,7 +902,8 @@ static int rkisp1_mipi_csi2_start(struct rkisp1_isp *isp,
>  
>  	phy_mipi_dphy_get_default_config(pixel_clock, isp->sink_fmt->bus_width,
>  					 sensor->lanes, cfg);
> -	phy_set_mode(sensor->dphy, PHY_MODE_MIPI_DPHY);
> +	phy_set_mode_ext(cdev->dphy, PHY_MODE_MIPI_DPHY,
> +			 PHY_MIPI_DPHY_SUBMODE_RX);

>From rkisp1 pov, looks good to me

Acked-by: Helen Koike <helen.koike at collabora.com>

Regards,
Helen

>  	phy_configure(sensor->dphy, &opts);
>  	phy_power_on(sensor->dphy);
>  
> diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
> index a877ffee845d..0f57ef46a8b5 100644
> --- a/include/linux/phy/phy-mipi-dphy.h
> +++ b/include/linux/phy/phy-mipi-dphy.h
> @@ -6,6 +6,19 @@
>  #ifndef __PHY_MIPI_DPHY_H_
>  #define __PHY_MIPI_DPHY_H_
>  
> +/**
> + * enum phy_mipi_dphy_submode - MIPI D-PHY sub-mode
> + *
> + * A MIPI D-PHY can be used to transmit or receive data.
> + * Since some controllers can support both, the direction to enable is specified
> + * with the PHY sub-mode. Transmit is assumed by default with phy_set_mode.
> + */
> +
> +enum phy_mipi_dphy_submode {
> +	PHY_MIPI_DPHY_SUBMODE_TX = 0,
> +	PHY_MIPI_DPHY_SUBMODE_RX,
> +};
> +
>  /**
>   * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
>   *
> 


More information about the devel mailing list