[PATCH 07/14] dt-bindings: media: i2c: Add A31 MIPI CSI-2 bindings documentation

[Paul Kocialkowski]

Hi,

On Mon 26 Oct 20, 17:14, Maxime Ripard wrote:
> i2c? :)

Oops, good catch!
 
> On Fri, Oct 23, 2020 at 07:45:39PM +0200, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the A31 MIPI CSI-2
> > controller.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > ---
> >  .../media/allwinner,sun6i-a31-mipi-csi2.yaml  | 168 ++++++++++++++++++
> >  1 file changed, 168 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > new file mode 100644
> > index 000000000000..9adc0bc27033
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > @@ -0,0 +1,168 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> > +
> > +maintainers:
> > +  - Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: allwinner,sun6i-a31-mipi-csi2
> > +      - items:
> > +          - const: allwinner,sun8i-v3s-mipi-csi2
> > +          - const: allwinner,sun6i-a31-mipi-csi2
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Bus Clock
> > +      - description: Module Clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: bus
> > +      - const: mod
> > +
> > +  phys:
> > +    items:
> > +      - description: MIPI D-PHY
> > +
> > +  phy-names:
> > +    items:
> > +      - const: dphy
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  # See ./video-interfaces.txt for details
> > +  ports:
> > +    type: object
> > +
> > +    properties:
> > +      port at 0:
> > +        type: object
> > +        description: Input port, connect to a MIPI CSI-2 sensor
> > +
> > +        properties:
> > +          reg:
> > +            const: 0
> > +
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              remote-endpoint: true
> > +
> > +              bus-type:
> > +                const: 4
> > +
> > +              clock-lanes:
> > +                maxItems: 1
> > +
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +            required:
> > +              - bus-type
> > +              - data-lanes
> > +              - remote-endpoint
> > +
> > +            additionalProperties: false
> > +
> > +        required:
> > +          - endpoint
> > +
> > +        additionalProperties: false
> > +
> > +      port at 1:
> > +        type: object
> > +        description: Output port, connect to a CSI controller
> > +
> > +        properties:
> > +          reg:
> > +            const: 1
> > +
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              remote-endpoint: true
> > +
> > +              bus-type:
> > +                const: 4
> 
> That one seems a bit weird. If the input and output ports are using the
> same format, what is that "bridge" supposed to be doing?

Fair enough. What this represents is the internal link (likely a FIFO) between
the two controllers. It is definitely not a MIPI CSI-2 bus but there's no
mbus type for an internal link (probably because it's not a bus after all).

Note that on the CSI controller side, we need the bus-type to be set to 4 for it
to properly select the MIPI CSI-2 input. So it just felt more logical to have
the same on the other side of the endpoint. On the other hand, we can just
remove it on the MIPI CSI-2 controller side since it won't check it and have it
fallback to the unknown mbus type.

But that would make the types inconsistent on the two sides of the link.
I don't think V4L2 will complain about it at the moment, but it would also make
sense that it does eventually.

What do you think?

> > +            additionalProperties: false
> > +
> > +        required:
> > +          - endpoint
> > +
> > +        additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > +    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> > +
> > +    mipi_csi2: mipi-csi2 at 1cb1000 {
> 
> The unit name should be pretty standard, with the list here:
> 
> https://github.com/devicetree-org/devicetree-specification/blob/master/source/chapter2-devicetree-basics.rst#generic-names-recommendation
> 
> there's nothing really standing out for us in that list, but given that
> there's dsi, we should stick with csi

Then what really surprises me is that the CSI controllers are called "camera",
not "csi". If "camera" is supposed to cover both image sensor and camera sensor
interfaces, it would probably fit MIPI CSI-2 as well.

I see lots of names with -controller for controllers with specific devices
attached, like "nand-controller" or "lcd-controller". Maybe using
"camera-controller" for the CSI and MIPI CSI-2 controllers would make the most
sense, while keeping "camera" for the actual image sensors.

What do you think?

Cheers,

Paul

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/attachments/20201027/7c85ac62/attachment.asc>