[PATCH 07/23] wfx: add bus_sdio.c

Ulf Hansson ulf.hansson at linaro.org
Fri Oct 16 11:30:30 UTC 2020


On Mon, 12 Oct 2020 at 12:47, Jerome Pouiller
<Jerome.Pouiller at silabs.com> wrote:
>
> From: Jérôme Pouiller <jerome.pouiller at silabs.com>

Please fill out this commit message to explain a bit more about the
patch and the HW it enables support for.

>
> Signed-off-by: Jérôme Pouiller <jerome.pouiller at silabs.com>
> ---
>  drivers/net/wireless/silabs/wfx/bus_sdio.c | 269 +++++++++++++++++++++
>  1 file changed, 269 insertions(+)
>  create mode 100644 drivers/net/wireless/silabs/wfx/bus_sdio.c
>
> diff --git a/drivers/net/wireless/silabs/wfx/bus_sdio.c b/drivers/net/wireless/silabs/wfx/bus_sdio.c
> new file mode 100644
> index 000000000000..e06d7e1ebe9c

[...]

> +
> +static int wfx_sdio_irq_subscribe(void *priv)
> +{
> +       struct wfx_sdio_priv *bus = priv;
> +       u32 flags;
> +       int ret;
> +       u8 cccr;
> +

I would appreciate a comment about an out-of-band IRQ line. If it's
supported, that is the preferred option to use, else the SDIO IRQs.

> +       if (!bus->of_irq) {
> +               sdio_claim_host(bus->func);
> +               ret = sdio_claim_irq(bus->func, wfx_sdio_irq_handler);
> +               sdio_release_host(bus->func);
> +               return ret;
> +       }
> +
> +       sdio_claim_host(bus->func);
> +       cccr = sdio_f0_readb(bus->func, SDIO_CCCR_IENx, NULL);
> +       cccr |= BIT(0);
> +       cccr |= BIT(bus->func->num);
> +       sdio_f0_writeb(bus->func, cccr, SDIO_CCCR_IENx, NULL);
> +       sdio_release_host(bus->func);
> +       flags = irq_get_trigger_type(bus->of_irq);
> +       if (!flags)
> +               flags = IRQF_TRIGGER_HIGH;
> +       flags |= IRQF_ONESHOT;
> +       return devm_request_threaded_irq(&bus->func->dev, bus->of_irq, NULL,
> +                                        wfx_sdio_irq_handler_ext, flags,
> +                                        "wfx", bus);
> +}
> +

[...]

> +
> +#define SDIO_VENDOR_ID_SILABS        0x0000
> +#define SDIO_DEVICE_ID_SILABS_WF200  0x1000
> +static const struct sdio_device_id wfx_sdio_ids[] = {
> +       { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
> +       // FIXME: ignore VID/PID and only rely on device tree
> +       // { SDIO_DEVICE(SDIO_ANY_ID, SDIO_ANY_ID) },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);

I will comment about the sdio IDs separately, replying to the other
thread between you and Pali.

> +
> +struct sdio_driver wfx_sdio_driver = {
> +       .name = "wfx-sdio",
> +       .id_table = wfx_sdio_ids,
> +       .probe = wfx_sdio_probe,
> +       .remove = wfx_sdio_remove,
> +       .drv = {
> +               .owner = THIS_MODULE,
> +               .of_match_table = wfx_sdio_of_match,
> +       }
> +};

I couldn't find where you call sdio_register|unregister_driver(), but
maybe that's done from another patch in series?

Kind regards
Uffe


More information about the devel mailing list