[PATCH v2 08/19] ARM: dts: sun8i: a83t: Add CSI controller ports

[Paul Kocialkowski]

Since the CSI controller binding is getting a bit more complex due
to the addition of MIPI CSI-2 bridge support, make the ports node
explicit with the parallel and MIPI CSI-2 bridge ports.

This way, it's clear that the controller supports both parallel and
MIPI CSI-2 interface inputs and there's no confusion about their port
number.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c010b27fdb6a..3ce030f7e05d 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1062,7 +1062,17 @@ csi: camera at 1cb0000 {
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 
-			csi_in: port {
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi_in_parallel: port at 0 {
+					reg = <0>;
+				};
+
+				csi_in_mipi_csi2_bridge: port at 1 {
+					reg = <1>;
+				};
 			};
 		};
 
-- 
2.29.2