[PATCH v4 17/18] dt: bindings: net: add microchip,wilc1000,spi.yaml
Ajay.Kathat at microchip.com
Ajay.Kathat at microchip.com
Mon Mar 2 16:34:40 UTC 2020
From: Ajay Singh <ajay.kathat at microchip.com>
Moved '/drivers/staging/wilc1000//microchip,wilc1000,spi.yaml' to
'Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml'.
Signed-off-by: Ajay Singh <ajay.kathat at microchip.com>
---
.../net/wireless/microchip,wilc1000,spi.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml
new file mode 100644
index 000000000000..cc8ed64ce627
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,spi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless SPI devicetree bindings
+
+maintainers:
+ - Adham Abozaeid <adham.abozaeid at microchip.com>
+ - Ajay Singh <ajay.kathat at microchip.com>
+
+description:
+ The wilc1000 chips can be connected via SPI. This document describes
+ the binding for the SPI connected module.
+
+properties:
+ compatible:
+ const: microchip,wilc1000-spi
+
+ spi-max-frequency:
+ description: Maximum SPI clocking speed of device in Hz.
+ maxItems: 1
+
+ reg:
+ description: Chip select address of device.
+ maxItems: 1
+
+ irq-gpios:
+ description: The GPIO phandle connect to a host IRQ.
+ maxItems: 1
+
+ clocks:
+ description: phandle to the clock connected on rtc clock line.
+ maxItems: 1
+
+required:
+ - compatible
+ - spi-max-frequency
+ - reg
+ - irq-gpios
+
+examples:
+ - |
+ spi1: spi at fc018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&pioB 21 0>;
+ status = "okay";
+ wilc_spi at 0 {
+ compatible = "microchip,wilc1000-spi";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ irq-gpios = <&pioC 27 0>;
+ clocks = <&pck1>;
+ clock-names = "rtc_clk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <32768>;
+ status = "okay";
+ };
+ };
--
2.24.0
More information about the devel
mailing list