[PATCH v2 06/48] dt-bindings: clock: tegra: Document clocks sub-node

[Rob Herring]

On Thu, Dec 17, 2020 at 09:05:56PM +0300, Dmitry Osipenko wrote:
> Document "clocks" sub-node which describes Tegra SoC clocks that require
> a higher voltage of the core power domain in order to operate properly on
> a higher rates.

Seems like an odd reason to have a bunch of child nodes. It very much 
seems like a problem you'd need to solve after you design the binding 
which should be fixed within the kernel.

This is also above my threshold for 'convert to schema' first...

> 
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  .../bindings/clock/nvidia,tegra20-car.txt     | 26 +++++++++++++++++++
>  .../bindings/clock/nvidia,tegra30-car.txt     | 26 +++++++++++++++++++
>  2 files changed, 52 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
> index 6c5901b503d0..353354477785 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
> @@ -19,6 +19,16 @@ Required properties :
>    In clock consumers, this cell represents the bit number in the CAR's
>    array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
>  
> +Optional child sub-node "clocks" should contain nodes matching the clocks
> +on the Tegra SoC. Refer to Tegra TRM for mode details on the clock nodes.
> +
> +Required properties :
> +- compatible : Should be "nvidia,tegra20-clock".
> +- operating-points-v2: See ../bindings/opp/opp.txt for details.
> +- clocks : Should contain clock which corresponds to the node.
> +- power-domains: Phandle to a power domain node as described by generic
> +                 PM domain bindings.
> +
>  Example SoC include file:
>  
>  / {
> @@ -27,6 +37,22 @@ Example SoC include file:
>  		reg = <0x60006000 0x1000>;
>  		#clock-cells = <1>;
>  		#reset-cells = <1>;
> +
> +		clocks {
> +			hdmi {
> +				compatible = "nvidia,tegra20-clock";
> +				operating-points-v2 = <&hdmi_opp_table>;
> +				clocks = <&tegra_car TEGRA20_CLK_HDMI>;
> +				power-domains = <&domain>;
> +			};
> +
> +			pll_m {
> +				compatible = "nvidia,tegra20-clock";
> +				operating-points-v2 = <&pll_m_opp_table>;
> +				clocks = <&tegra_car TEGRA20_CLK_PLL_M>;
> +				power-domains = <&domain>;
> +			};
> +		};
>  	};
>  
>  	usb at c5004000 {
> diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
> index 63618cde12df..bc7bbdaa9d3f 100644
> --- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
> +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
> @@ -19,6 +19,16 @@ Required properties :
>    In clock consumers, this cell represents the bit number in the CAR's
>    array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
>  
> +Optional child sub-node "clocks" should contain nodes matching the clocks
> +on the Tegra SoC. Refer to Tegra TRM for mode details on the clock nodes.
> +
> +Required properties :
> +- compatible : Should be "nvidia,tegra30-clock".
> +- operating-points-v2: See ../bindings/opp/opp.txt for details.
> +- clocks : Should contain clock which corresponds to the node.
> +- power-domains: Phandle to a power domain node as described by generic
> +                 PM domain bindings.
> +
>  Example SoC include file:
>  
>  / {
> @@ -31,6 +41,22 @@ Example SoC include file:
>  
>  	usb at c5004000 {
>  		clocks = <&tegra_car TEGRA30_CLK_USB2>;
> +
> +		clocks {
> +			hdmi {
> +				compatible = "nvidia,tegra30-clock";
> +				operating-points-v2 = <&hdmi_opp_table>;
> +				clocks = <&tegra_car TEGRA30_CLK_HDMI>;
> +				power-domains = <&domain>;
> +			};
> +
> +			pll_m {
> +				compatible = "nvidia,tegra30-clock";
> +				operating-points-v2 = <&pll_m_opp_table>;
> +				clocks = <&tegra_car TEGRA30_CLK_PLL_M>;
> +				power-domains = <&domain>;
> +			};
> +		};
>  	};
>  };
>  
> -- 
> 2.29.2
>