[PATCH 01/20] staging: wfx: add infrastructure for new driver
Jerome Pouiller
Jerome.Pouiller at silabs.com
Thu Sep 19 10:52:34 UTC 2019
From: Jérôme Pouiller <jerome.pouiller at silabs.com>
Instantiate build infrastructure WFx driver. This driver provides support
for Wifi chipset Silicon Labs WF200 and further:
https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
This chip support SPI and SDIO bus.
SDIO interface has two particularities:
1. Some parameters may be useful for end user (I will talk about
gpio_wakeup later).
2. The SDIO VID and PID of WF200 are 0000:0001 which are too much
generic to rely on.
So, current code checks VID/PID and looks for a node in DT (since WF200
targets embedded platforms, I don't think it is a problem to rely on
DT). DT can also be used to define to parameters for driver. Currently,
if no node is found, a warning is emitted, but it could be changed in
error.
Signed-off-by: Jérôme Pouiller <jerome.pouiller at silabs.com>
---
MAINTAINERS | 5 +
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
.../bindings/net/wireless/siliabs,wfx.txt | 97 +++++++++++++++++++
drivers/staging/wfx/Kconfig | 7 ++
drivers/staging/wfx/Makefile | 8 ++
drivers/staging/wfx/bus.h | 17 ++++
drivers/staging/wfx/bus_sdio.c | 70 +++++++++++++
drivers/staging/wfx/bus_spi.c | 53 ++++++++++
drivers/staging/wfx/main.c | 47 +++++++++
drivers/staging/wfx/wfx_version.h | 3 +
11 files changed, 310 insertions(+)
create mode 100644 drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
create mode 100644 drivers/staging/wfx/Kconfig
create mode 100644 drivers/staging/wfx/Makefile
create mode 100644 drivers/staging/wfx/bus.h
create mode 100644 drivers/staging/wfx/bus_sdio.c
create mode 100644 drivers/staging/wfx/bus_spi.c
create mode 100644 drivers/staging/wfx/main.c
create mode 100644 drivers/staging/wfx/wfx_version.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b2326dece28e..0ad6fbde3ac9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14755,6 +14755,11 @@ S: Maintained
F: drivers/input/touchscreen/silead.c
F: drivers/platform/x86/touchscreen_dmi.c
+SILICON LABS WIRELESS DRIVERS (for WFxxx series)
+M: Jérôme Pouiller <jerome.pouiller at silabs.com>
+S: Supported
+F: drivers/staging/wfx/
+
SILICON MOTION SM712 FRAME BUFFER DRIVER
M: Sudip Mukherjee <sudipm.mukherjee at gmail.com>
M: Teddy Wang <teddy.wang at siliconmotion.com>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 6f1fa4c849a1..a490141a0e88 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -125,4 +125,6 @@ source "drivers/staging/exfat/Kconfig"
source "drivers/staging/qlge/Kconfig"
+source "drivers/staging/wfx/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index a90f9b308c8d..4cb548a0ff87 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -53,3 +53,4 @@ obj-$(CONFIG_UWB) += uwb/
obj-$(CONFIG_USB_WUSB) += wusbcore/
obj-$(CONFIG_EXFAT_FS) += exfat/
obj-$(CONFIG_QLGE) += qlge/
+obj-$(CONFIG_WFX) += wfx/
diff --git a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
new file mode 100644
index 000000000000..15965c9b4180
--- /dev/null
+++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
@@ -0,0 +1,97 @@
+The WFxxx chip series can be connected via SPI or via SDIO.
+
+SPI
+---
+
+You have to declare the WFxxx chip in your device tree.
+
+Required properties:
+ - compatible: Should be "silabs,wfx-spi"
+ - reg: Chip select address of device
+ - spi-max-frequency: Maximum SPI clocking speed of device in Hz
+ - interrupts-extended: Should contain interrupt line (interrupt-parent +
+ interrupt can also been used). Trigger should be `IRQ_TYPE_EDGE_RISING`.
+
+Optional properties:
+ - reset-gpios: phandle of gpio that will be used to reset chip during probe.
+ Without this property, you may encounter issues with warm boot.
+
+Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional
+SPI connection related properties,
+
+Example:
+
+&spi1 {
+ wfx {
+ compatible = "silabs,wfx-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wfx_irq &wfx_gpios>;
+ interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+ wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ reg = <0>;
+ spi-max-frequency = <42000000>;
+ };
+};
+
+
+SDIO
+----
+
+The driver is able to detect a WFxxx chip on SDIO bus by matching its Vendor ID
+and Product ID. However, driver will only provide limited features in this
+case. Thus declaring WFxxx chip in device tree is strongly recommended (and may
+become mandatory in the future).
+
+Required properties:
+ - compatible: Should be "silabs,wfx-sdio"
+ - reg: Should be 1
+
+In addition, it is recommended to declare a mmc-pwrseq on SDIO host above WFx.
+Without it, you may encounter issues with warm boot. mmc-pwrseq should be
+compatible with mmc-pwrseq-simple. Please consult
+Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt for more
+information.
+
+Example:
+
+/ {
+ wfx_pwrseq: wfx_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wfx_reset>;
+ reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc1 {
+ mmc-pwrseq = <&wfx_pwrseq>;
+ #address-size = <1>;
+ #size = <0>;
+
+ mmc at 1 {
+ compatible = "silabs,wfx-sdio";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wfx_wakeup>;
+ wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+Note that #address-size and #size shoud already be defined in node mmc1, but it
+is rarely the case.
+
+Common properties
+-----------------
+
+Some properties are recognized either by SPI and SDIO versions:
+ - wakeup-gpios: phandle of gpio that will be used to wake-up chip. Without
+ this property, driver will disable most of power saving features.
+ - config-file: Use an alternative file as PDS. Default is `wf200.pds`. Only
+ necessary for development/debug purpose.
+ - slk_key: String representing hexdecimal value of secure link key to use.
+ Must contains 64 hexadecimal digits. Not supported in current version.
+
+WFx driver also supports `mac-address` and `local-mac-address` as described in
+Documentation/devicetree/binding/net/ethernet.txt
+
diff --git a/drivers/staging/wfx/Kconfig b/drivers/staging/wfx/Kconfig
new file mode 100644
index 000000000000..9b8a1c7a9e90
--- /dev/null
+++ b/drivers/staging/wfx/Kconfig
@@ -0,0 +1,7 @@
+config WFX
+ tristate "Silicon Labs wireless chips WF200 and further"
+ depends on MAC80211
+ depends on (SPI || MMC)
+ help
+ This is a driver for Silicons Labs WFxxx series (WF200 and further)
+ chipsets. This chip can be found on SPI or SDIO buses.
diff --git a/drivers/staging/wfx/Makefile b/drivers/staging/wfx/Makefile
new file mode 100644
index 000000000000..74939a5a0a1c
--- /dev/null
+++ b/drivers/staging/wfx/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+
+wfx-y := \
+ main.o
+wfx-$(CONFIG_SPI) += bus_spi.o
+wfx-$(subst m,y,$(CONFIG_MMC)) += bus_sdio.o
+
+obj-$(CONFIG_WFX) += wfx.o
diff --git a/drivers/staging/wfx/bus.h b/drivers/staging/wfx/bus.h
new file mode 100644
index 000000000000..8ce871a8a9ff
--- /dev/null
+++ b/drivers/staging/wfx/bus.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Common bus abstraction layer.
+ *
+ * Copyright (c) 2017-2018, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#ifndef WFX_BUS_H
+#define WFX_BUS_H
+
+#include <linux/mmc/sdio_func.h>
+#include <linux/spi/spi.h>
+
+extern struct sdio_driver wfx_sdio_driver;
+extern struct spi_driver wfx_spi_driver;
+
+#endif
diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c
new file mode 100644
index 000000000000..4b26c994f43c
--- /dev/null
+++ b/drivers/staging/wfx/bus_sdio.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SDIO interface.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/module.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+#include <linux/of_irq.h>
+
+#include "bus.h"
+
+static const struct of_device_id wfx_sdio_of_match[];
+static int wfx_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct device_node *np = func->dev.of_node;
+
+ if (func->num != 1) {
+ dev_err(&func->dev, "SDIO function number is %d while it should always be 1 (unsupported chip?)\n", func->num);
+ return -ENODEV;
+ }
+
+ if (np) {
+ if (!of_match_node(wfx_sdio_of_match, np)) {
+ dev_warn(&func->dev, "no compatible device found in DT\n");
+ return -ENODEV;
+ }
+ } else {
+ dev_warn(&func->dev, "device is not declared in DT, features will be limited\n");
+ // FIXME: ignore VID/PID and only rely on device tree
+ // return -ENODEV;
+ }
+ return -EIO; // FIXME: not yet supported
+}
+
+static void wfx_sdio_remove(struct sdio_func *func)
+{
+}
+
+#define SDIO_VENDOR_ID_SILABS 0x0000
+#define SDIO_DEVICE_ID_SILABS_WF200 0x1000
+static const struct sdio_device_id wfx_sdio_ids[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
+ // FIXME: ignore VID/PID and only rely on device tree
+ // { SDIO_DEVICE(SDIO_ANY_ID, SDIO_ANY_ID) },
+ { },
+};
+MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id wfx_sdio_of_match[] = {
+ { .compatible = "silabs,wfx-sdio" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, wfx_sdio_of_match);
+#endif
+
+struct sdio_driver wfx_sdio_driver = {
+ .name = "wfx-sdio",
+ .id_table = wfx_sdio_ids,
+ .probe = wfx_sdio_probe,
+ .remove = wfx_sdio_remove,
+ .drv = {
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(wfx_sdio_of_match),
+ }
+};
diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c
new file mode 100644
index 000000000000..574b60f513e9
--- /dev/null
+++ b/drivers/staging/wfx/bus_spi.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI interface.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2011, Sagrad Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/of.h>
+
+#include "bus.h"
+
+static int wfx_spi_probe(struct spi_device *func)
+{
+ return -EIO;
+}
+
+/* Disconnect Function to be called by SPI stack when device is disconnected */
+static int wfx_spi_disconnect(struct spi_device *func)
+{
+ return 0;
+}
+
+/*
+ * For dynamic driver binding, kernel does not use OF to match driver. It only
+ * use modalias and modalias is a copy of 'compatible' DT node with vendor
+ * stripped.
+ */
+static const struct spi_device_id wfx_spi_id[] = {
+ { "wfx-spi", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, wfx_spi_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id wfx_spi_of_match[] = {
+ { .compatible = "silabs,wfx-spi" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, wfx_spi_of_match);
+#endif
+
+struct spi_driver wfx_spi_driver = {
+ .driver = {
+ .name = "wfx-spi",
+ .of_match_table = of_match_ptr(wfx_spi_of_match),
+ },
+ .id_table = wfx_spi_id,
+ .probe = wfx_spi_probe,
+ .remove = wfx_spi_disconnect,
+};
diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
new file mode 100644
index 000000000000..cd69f955f531
--- /dev/null
+++ b/drivers/staging/wfx/main.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device probe and register.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (c) 2008, Johannes Berg <johannes at sipsolutions.net>
+ * Copyright (c) 2008 Nokia Corporation and/or its subsidiary(-ies).
+ * Copyright (c) 2007-2009, Christian Lamparter <chunkeey at web.de>
+ * Copyright (c) 2006, Michael Wu <flamingice at sourmilk.net>
+ * Copyright (c) 2004-2006 Jean-Baptiste Note <jbnote at gmail.com>, et al.
+ */
+#include <linux/module.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/spi/spi.h>
+#include <linux/etherdevice.h>
+
+#include "bus.h"
+#include "wfx_version.h"
+
+MODULE_DESCRIPTION("Silicon Labs 802.11 Wireless LAN driver for WFx");
+MODULE_AUTHOR("Jérôme Pouiller <jerome.pouiller at silabs.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(WFX_LABEL);
+
+static int __init wfx_core_init(void)
+{
+ int ret = 0;
+
+ pr_info("wfx: Silicon Labs " WFX_LABEL "\n");
+
+ if (IS_ENABLED(CONFIG_SPI))
+ ret = spi_register_driver(&wfx_spi_driver);
+ if (IS_ENABLED(CONFIG_MMC) && !ret)
+ ret = sdio_register_driver(&wfx_sdio_driver);
+ return ret;
+}
+module_init(wfx_core_init);
+
+static void __exit wfx_core_exit(void)
+{
+ if (IS_ENABLED(CONFIG_MMC))
+ sdio_unregister_driver(&wfx_sdio_driver);
+ if (IS_ENABLED(CONFIG_SPI))
+ spi_unregister_driver(&wfx_spi_driver);
+}
+module_exit(wfx_core_exit);
diff --git a/drivers/staging/wfx/wfx_version.h b/drivers/staging/wfx/wfx_version.h
new file mode 100644
index 000000000000..6e7f30207c73
--- /dev/null
+++ b/drivers/staging/wfx/wfx_version.h
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT! */
+#define WFX_LABEL "2.3.1"
--
2.20.1
More information about the devel
mailing list