[PATCH 1/5] iio: adc: ad7606: Move oversampling and scale options to chip info

Beniamin Bia beniamin.bia at analog.com
Thu May 16 14:32:04 UTC 2019


The device dependent options which are going to be different for devices
which will be supported  in the future by this driver,
were moved in chip info for a more generic driver. This patch allows
supporting more devices by the driver. Also, it is an intermediate
step of adding support for ad7616 in software mode.

Signed-off-by: Beniamin Bia <beniamin.bia at analog.com>
---
 drivers/iio/adc/ad7606.c | 61 +++++++++++++++++++++++++++++-----------
 drivers/iio/adc/ad7606.h | 15 +++++++++-
 2 files changed, 58 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 24c70c3cefb4..c66ff22f32d2 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -158,7 +158,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
-		*val2 = st->scale_avail[st->range];
+		*val2 = st->scale_avail[st->range[0]];
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		*val = st->oversampling;
@@ -194,6 +194,32 @@ static ssize_t in_voltage_scale_available_show(struct device *dev,
 
 static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
 
+static int ad7606_write_scale_hw(struct iio_dev *indio_dev, int ch, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	gpiod_set_value(st->gpio_range, val);
+
+	return 0;
+}
+
+static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	DECLARE_BITMAP(values, 3);
+
+	values[0] = val;
+
+	gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+			      st->gpio_os->info, values);
+
+	/* AD7616 requires a reset to update value */
+	if (st->chip_info->os_req_reset)
+		ad7606_reset(st);
+
+	return 0;
+}
+
 static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int val,
@@ -201,15 +227,18 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
-	DECLARE_BITMAP(values, 3);
-	int i;
+	int i, ret, ch = 0;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
 		mutex_lock(&st->lock);
 		i = find_closest(val2, st->scale_avail, st->num_scales);
-		gpiod_set_value(st->gpio_range, i);
-		st->range = i;
+		ret = st->write_scale(indio_dev, chan->address, i);
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
+		st->range[ch] = i;
 		mutex_unlock(&st->lock);
 
 		return 0;
@@ -218,17 +247,12 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			return -EINVAL;
 		i = find_closest(val, st->oversampling_avail,
 				 st->num_os_ratios);
-
-		values[0] = i;
-
 		mutex_lock(&st->lock);
-		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
-				      st->gpio_os->info, values);
-
-		/* AD7616 requires a reset to update value */
-		if (st->chip_info->os_req_reset)
-			ad7606_reset(st);
-
+		ret = st->write_os(indio_dev, i);
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
 		st->oversampling = st->oversampling_avail[i];
 		mutex_unlock(&st->lock);
 
@@ -536,7 +560,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	st->bops = bops;
 	st->base_address = base_address;
 	/* tied to logic low, analog input range is +/- 5V */
-	st->range = 0;
+	st->range[0] = 0;
 	st->oversampling = 1;
 	st->scale_avail = ad7606_scale_avail;
 	st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
@@ -589,6 +613,9 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	if (ret)
 		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
 
+	st->write_scale = ad7606_write_scale_hw;
+	st->write_os = ad7606_write_os_hw;
+
 	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
 					  indio_dev->name, indio_dev->id);
 	if (!st->trig)
@@ -643,7 +670,7 @@ static int ad7606_resume(struct device *dev)
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (st->gpio_standby) {
-		gpiod_set_value(st->gpio_range, st->range);
+		gpiod_set_value(st->gpio_range, st->range[0]);
 		gpiod_set_value(st->gpio_standby, 1);
 		ad7606_reset(st);
 	}
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index f9ef52131e74..143c30163df9 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -16,6 +16,12 @@
  *			oversampling ratios.
  * @oversampling_num	number of elements stored in oversampling_avail array
  * @os_req_reset	some devices require a reset to update oversampling
+ * @write_scale_sw	pointer to the function which writes the scale via spi
+			in software mode
+ * @write_os_sw		pointer to the function which writes the os via spi
+			in software mode
+ * @sw_mode_config:	pointer to a function which configured the device
+ *			for software mode
  */
 struct ad7606_chip_info {
 	const struct iio_chan_spec	*channels;
@@ -23,6 +29,9 @@ struct ad7606_chip_info {
 	const unsigned int		*oversampling_avail;
 	unsigned int			oversampling_num;
 	bool				os_req_reset;
+	int (*write_scale_sw)(struct iio_dev *indio_dev, int ch, int val);
+	int (*write_os_sw)(struct iio_dev *indio_dev, int val);
+	int (*sw_mode_config)(struct iio_dev *indio_dev);
 };
 
 /**
@@ -39,6 +48,8 @@ struct ad7606_chip_info {
  * @oversampling_avail	pointer to the array which stores the available
  *			oversampling ratios.
  * @num_os_ratios	number of elements stored in oversampling_avail array
+ * @write_scale		pointer to the function which writes the scale
+ * @write_os		pointer to the function which writes the os
  * @lock		protect sensor state from concurrent accesses to GPIOs
  * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
  * @gpio_reset		GPIO descriptor for device hard-reset
@@ -57,13 +68,15 @@ struct ad7606_state {
 	const struct ad7606_chip_info	*chip_info;
 	struct regulator		*reg;
 	const struct ad7606_bus_ops	*bops;
-	unsigned int			range;
+	unsigned int			range[16];
 	unsigned int			oversampling;
 	void __iomem			*base_address;
 	const unsigned int		*scale_avail;
 	unsigned int			num_scales;
 	const unsigned int		*oversampling_avail;
 	unsigned int			num_os_ratios;
+	int (*write_scale)(struct iio_dev *indio_dev, int ch, int val);
+	int (*write_os)(struct iio_dev *indio_dev, int val);
 
 	struct mutex			lock; /* protect sensor state */
 	struct gpio_desc		*gpio_convst;
-- 
2.17.1



More information about the devel mailing list