[PATCH V5 10/16] s390: zfcp_fc: use sg helper to operate scatterlist
Ming Lei
ming.lei at redhat.com
Wed Jun 26 03:07:52 UTC 2019
Hi Steffen,
On Tue, Jun 25, 2019 at 12:51:04PM +0200, Steffen Maier wrote:
> Hi Ming,
>
> I don't mind doing this change for zfcp. However, I'm having doubts
> regarding the rationale in the commit description. If I understood your
> patch series correctly from its cover letter (would have been nice to copy
> the SCSI MQ detail part of its core statement in (one of) the patches so it
> would make its way into git log), you plan to make a change to scatterlist
> allocations *in SCSI MQ*.
>
> All zfcp changes in this patch set only refer to zfcp-internal remote port
> discovery, i.e. they neither come from SCSI (internally) nor from block(mq).
If you are sure about that, it is fine to not change zfcp.
However, I still suggest to do it because it will make us to audit SCSI chained
sg uses much easier. And the change shouldn't have performance effect.
>
> zfcp_fc.h:
> /**
> * struct zfcp_fc_req - Container for FC ELS and CT requests sent from zfcp
> * @ct_els: data required for issuing fsf command
> * @sg_req: scatterlist entry for request data, refers to embedded @u submember
> * @sg_rsp: scatterlist entry for response data, refers to embedded @u submember
> * @u: request and response specific data
>
> * @u.gpn_ft: GPN_FT specific data
> * @u.gpn_ft.sg_rsp2: GPN_FT response, not embedded here, allocated elsewhere
> * @u.gpn_ft.req: GPN_FT request
>
> */
> struct zfcp_fc_req {
> struct zfcp_fsf_ct_els ct_els;
> struct scatterlist sg_req;
> struct scatterlist sg_rsp;
> union {
>
> struct {
> struct scatterlist sg_rsp2[ZFCP_FC_GPN_FT_NUM_BUFS - 1];
> struct zfcp_fc_gpn_ft_req req;
> } gpn_ft;
>
> } u;
> };
>
> So this should be guaranteed to be a linear unchained scatterlist,
> independently of your SCSI (or block) changes.
> Note: Only remote port discovery also uses u.gpn_ft.sg_rsp2 instead of just sg_rsp.
> zfcp_fc_scan_ports(work)
> zfcp_fc_alloc_sg_env(buf_num)
> zfcp_fc_sg_setup_table(&fc_req->sg_rsp, buf_num)
> (In fact it's somewhat intricate, because it actually uses sg_rsp and seems
> to rely on the fact that the subsequent sg_rsp2[] gives enough contiguous
> memory to hold buf_num linear scatterlist entries starting with field offset
> sg_rsp.)
> The other cases use single element and thus linear unchained scatterlist
> with sg_rsp (and all cases use sg_req):
> Finding symbol: sg_init_one
> Database directory: /home/maier/docs/zfcp/tuxmaker/linux/drivers/s390/scsi/
> -------------------------------------------------------------------------------
> *** zfcp_dbf.c:
> zfcp_dbf_san_in_els[601] sg_init_one(&sg, srb->payload.data, length);
> // above tracing part is unrelated to all of scsi/block/zfcp-internal-ct/els
> *** zfcp_fc.c:
> zfcp_fc_ns_gid_pn_request[388] sg_init_one(&fc_req->sg_req, gid_pn_req,
> sizeof(*gid_pn_req));
> zfcp_fc_ns_gid_pn_request[389] sg_init_one(&fc_req->sg_rsp, gid_pn_rsp,
> sizeof(*gid_pn_rsp));
> zfcp_fc_adisc[546] sg_init_one(&fc_req->sg_req, &fc_req->u.adisc.req,
> zfcp_fc_adisc[548] sg_init_one(&fc_req->sg_rsp, &fc_req->u.adisc.rsp,
> zfcp_fc_alloc_sg_env[668] sg_init_one(&fc_req->sg_req, &fc_req->u.gpn_ft.req,
> zfcp_fc_gspn[841] sg_init_one(&fc_req->sg_req, gspn_req,
> sizeof(*gspn_req));
> zfcp_fc_gspn[842] sg_init_one(&fc_req->sg_rsp, gspn_rsp,
> sizeof(*gspn_rsp));
> zfcp_fc_rspn[889] sg_init_one(&fc_req->sg_req, rspn_req,
> sizeof(*rspn_req));
> zfcp_fc_rspn[890] sg_init_one(&fc_req->sg_rsp, rspn_rsp,
> sizeof(*rspn_rsp));
> -------------------------------------------------------------------------------
>
> I/O requests from SCSI (MQ) coming through queuecommand have already been
> safe for non-linear chained scatterlists in zfcp:
>
> zfcp_scsi_queuecommand()
> zfcp_fsf_fcp_cmnd()
> zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, scsi_sglist(scsi_cmnd))
> for (; sg; sg = sg_next(sg)) {
>
> I/O requests from the block layer coming through BSG should also have
> already been safe for non-linear chained scatterlists in zfcp:
>
> zfcp_fc_exec_bsg_job()
> zfcp_fc_exec_els_job()
> zfcp_fsf_send_els()
> zfcp_fsf_setup_ct_els()
> zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp)
> //depending on hardware features, translate sg into HW control blocks
> if (zfcp_adapter_multi_buffer_active())
> zfcp_qdio_sbals_from_sg() //for req&resp, see above
> return 0
> /* use single, unchained SBAL if it can hold the request */
> if (zfcp_qdio_sg_one_sbale(sg_req) && zfcp_qdio_sg_one_sbale(sg_resp))
> zfcp_fsf_setup_ct_els_unchained() //single element for req&resp
> return 0
> if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS))
> return -EOPNOTSUPP;
> zfcp_qdio_sbals_from_sg() for req&resp, see above
> OR
> zfcp_fc_exec_ct_job()
> zfcp_fsf_send_ct()
> zfcp_fsf_setup_ct_els() //see above
>
> If I was not mistaken above, the following could be more descriptive parts
> of a patch/commit description, with hopefully less confusion for anyone
> having to look at zfcp git history a few weeks/months/years from now:
>
> "While not required for this SCSI MQ change regarding scatterlist
> allocation, change all other scatterlist iterators in zfcp to the safe
> sg_next() even if not necessary as these changed zfcp-internal scatterlists
> are linear and unchained. This may avoid confusion about a potential need
> for conversions in the future."
>
>
> On 6/25/19 3:19 AM, Ming Lei wrote:
> > On Mon, Jun 24, 2019 at 05:13:24PM +0200, Steffen Maier wrote:
> > > On 6/18/19 3:37 AM, Ming Lei wrote:
> > > > Use the scatterlist iterators and remove direct indexing of the
> > > > scatterlist array.
> > > >
> > > > This way allows us to pre-allocate one small scatterlist, which can be
> > > > chained with one runtime allocated scatterlist if the pre-allocated one
> > > > isn't enough for the whole request.
>
> > > > Acked-by: Benjamin Block <bblock at linux.ibm.com>
> > > > Reviewed-by: Christoph Hellwig <hch at lst.de>
> > > > Reviewed-by: Bart Van Assche <bvanassche at acm.org>
> > > > Signed-off-by: Ming Lei <ming.lei at redhat.com>
> > > > ---
> > > > drivers/s390/scsi/zfcp_fc.c | 4 ++--
> > > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
> > > > index 33eddb02ee30..b018b61bd168 100644
> > > > --- a/drivers/s390/scsi/zfcp_fc.c
> > > > +++ b/drivers/s390/scsi/zfcp_fc.c
> > > > @@ -620,7 +620,7 @@ static void zfcp_fc_sg_free_table(struct scatterlist *sg, int count)
> > > > {
> > > > int i;
> > > > - for (i = 0; i < count; i++, sg++)
> > > > + for (i = 0; i < count; i++, sg = sg_next(sg))
> > > > if (sg)
> > > > free_page((unsigned long) sg_virt(sg));
> > > > else
> > > > @@ -641,7 +641,7 @@ static int zfcp_fc_sg_setup_table(struct scatterlist *sg, int count)
> > > > int i;
> > > > sg_init_table(sg, count);
> > > > - for (i = 0; i < count; i++, sg++) {
> > > > + for (i = 0; i < count; i++, sg = sg_next(sg)) {
> > > > addr = (void *) get_zeroed_page(GFP_KERNEL);
> > > > if (!addr) {
> > > > zfcp_fc_sg_free_table(sg, i);
> > > >
> > >
> > > I'm still catching up with emails that came during my vacation, so I'm not
> > > fully up-to-date on the current state of this and how to bring in potential
> > > fixups on top.
> > >
> > > I think, we also have two more (not so obvious) places in the corresponding
> > > response/completion code path, where we might need to introduce the proper
> > > iterator helper:
> > >
> > > zfcp_fsf.c:
> > >
> > > static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_req *fc_req,
> > > struct zfcp_adapter *adapter, int max_entries)
> > > {
> > > struct scatterlist *sg = &fc_req->sg_rsp;
> > > ...
> > > /* first entry is the header */
> > > for (x = 1; x < max_entries && !last; x++) {
> > > ...
> > > if (x % (ZFCP_FC_GPN_FT_ENT_PAGE + 1))
> > > ...
> > > else
> > > acc = sg_virt(++sg);
> > > ^^^^
> > >
> > > zfcp_dbf.c:
> > >
> > > static u16 zfcp_dbf_san_res_cap_len_if_gpn_ft(char *tag,
> > > struct zfcp_fsf_req *fsf,
> > > u16 len)
> > > {
> > > struct scatterlist *resp_entry = ct_els->resp;
> > > ...
> > > /* the basic CT_IU preamble is the same size as one entry in the GPN_FT
> > > * response, allowing us to skip special handling for it - just skip it
> > > */
> > > for (x = 1; x < max_entries && !last; x++) {
> > > if (x % (ZFCP_FC_GPN_FT_ENT_PAGE + 1))
> > > ...
> > > else
> > > acc = sg_virt(++resp_entry);
> > > ^^^^^^^^^^^^
> > >
> > >
> > > What do you think?
> >
> > Yeah, looks this one is missed, so we need the following patch:
> >
> > From c9c368308fefbf034d670984fe9746a4181fe514 Mon Sep 17 00:00:00 2001
> > From: Ming Lei <ming.lei at redhat.com>
> > Date: Tue, 25 Jun 2019 09:15:34 +0800
> > Subject: [PATCH] s390: scsi: use sg helper to iterate over scatterlist
> >
> > Unlike the legacy I/O path, scsi-mq preallocates a large array to hold
> > the scatterlist for each request. This static allocation can consume
> > substantial amounts of memory on modern controllers which support a
> > large number of concurrently outstanding requests.
>
> Very nice, as it disambiguates which scatterlist allocation this patch set
> is about.
>
> > To facilitate a switch to a smaller static allocation combined with a
> > dynamic allocation for requests that need it, we need to make sure all
> > SCSI drivers handle chained scatterlists correctly.
> >
> > Convert remaining drivers that directly dereference the scatterlist
> > array to using the iterator functions.
> >
> > Cc: Steffen Maier <maier at linux.ibm.com>
>
> > Cc: Benjamin Block <bblock at linux.ibm.com>
>
> > Cc: Martin Schwidefsky <schwidefsky at de.ibm.com>
> > Cc: Heiko Carstens <heiko.carstens at de.ibm.com>
> > Cc: linux-s390 at vger.kernel.org
>
> > Cc: Benjamin Block <bblock at linux.ibm.com>
>
> Minor: duplicate Cc ?
>
> > Signed-off-by: Ming Lei <ming.lei at redhat.com>
> > ---
> > drivers/s390/scsi/zfcp_dbf.c | 2 +-
> > drivers/s390/scsi/zfcp_fc.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
> > index dccdb41bed8c..c7129f5234f0 100644
> > --- a/drivers/s390/scsi/zfcp_dbf.c
> > +++ b/drivers/s390/scsi/zfcp_dbf.c
> > @@ -552,7 +552,7 @@ static u16 zfcp_dbf_san_res_cap_len_if_gpn_ft(char *tag,
> > if (x % (ZFCP_FC_GPN_FT_ENT_PAGE + 1))
> > acc++;
> > else
> > - acc = sg_virt(++resp_entry);
> > + acc = sg_virt(resp_entry = sg_next(resp_entry));
> > last = acc->fp_flags & FC_NS_FID_LAST;
> > }
> > diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
> > index b018b61bd168..5048812ce660 100644
> > --- a/drivers/s390/scsi/zfcp_fc.c
> > +++ b/drivers/s390/scsi/zfcp_fc.c
> > @@ -742,7 +742,7 @@ static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_req *fc_req,
> > if (x % (ZFCP_FC_GPN_FT_ENT_PAGE + 1))
> > acc++;
> > else
> > - acc = sg_virt(++sg);
> > + acc = sg_virt(sg = sg_next(sg));
> > last = acc->fp_flags & FC_NS_FID_LAST;
> > d_id = ntoh24(acc->fp_fid);
> >
>
> Apart from above rationale discussion, the code change looks good.
OK, I still suggest to apply the patch for the mentioned reason if you
are fine.
Thanks,
Ming
More information about the devel
mailing list