[PATCH v2 2/3] media: imx7-media-csi: add i.MX6UL support

Sébastien Szymanski sebastien.szymanski at armadeus.com
Tue Jun 11 08:16:37 UTC 2019


Hi Rui,

thanks for the review!

On 6/10/19 12:28 PM, Rui Miguel Silva wrote:
> Hi Sebastien,
> Thanks for the patch.
> 
> On Thu 06 Jun 2019 at 16:38, Sébastien Szymanski wrote:
>> i.MX7 and i.MX6UL/L have the same CSI controller. So add i.MX6UL/L support
>> to imx7-media-csi driver.
>>
>> Signed-off-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>
>> ---
>>
>> Changes for v2:
>>  - rebase on top of linuxtv/master
>>  - mention i.MX6UL/L in header and Kconfig help text
>>  - rename csi_type to csi_soc_id
>>
>>  drivers/staging/media/imx/Kconfig          |  4 +-
>>  drivers/staging/media/imx/imx7-media-csi.c | 62 ++++++++++++++++------
>>  2 files changed, 49 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
>> index ad3d7df6bb3c..8b6dc42c39e0 100644
>> --- a/drivers/staging/media/imx/Kconfig
>> +++ b/drivers/staging/media/imx/Kconfig
>> @@ -22,11 +22,11 @@ config VIDEO_IMX_CSI
>>  	  A video4linux camera sensor interface driver for i.MX5/6.
>>
>>  config VIDEO_IMX7_CSI
>> -	tristate "i.MX7 Camera Sensor Interface driver"
>> +	tristate "i.MX6UL/L / i.MX7 Camera Sensor Interface driver"
>>  	depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C
>>  	default y
>>  	help
>>  	  Enable support for video4linux camera sensor interface driver for
>> -	  i.MX7.
>> +	  i.MX6UL/L or i.MX7.
>>  endmenu
>>  endif
>> diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
>> index 9101566f3f67..902bdce594cf 100644
>> --- a/drivers/staging/media/imx/imx7-media-csi.c
>> +++ b/drivers/staging/media/imx/imx7-media-csi.c
>> @@ -1,6 +1,6 @@
>>  // SPDX-License-Identifier: GPL-2.0
>>  /*
>> - * V4L2 Capture CSI Subdev for Freescale i.MX7 SOC
>> + * V4L2 Capture CSI Subdev for Freescale i.MX6UL/L / i.MX7 SOC
>>   *
>>   * Copyright (c) 2019 Linaro Ltd
>>   *
>> @@ -152,6 +152,11 @@
>>  #define CSI_CSICR18		0x48
>>  #define CSI_CSICR19		0x4c
>>
>> +enum csi_soc_id {
>> +	IMX7,
>> +	IMX6UL
>> +};
>> +
>>  struct imx7_csi {
>>  	struct device *dev;
>>  	struct v4l2_subdev sd;
>> @@ -191,6 +196,7 @@ struct imx7_csi {
>>  	bool is_init;
>>  	bool is_streaming;
>>  	bool is_csi2;
>> +	enum csi_soc_id soc_id;
>>
>>  	struct completion last_eof_completion;
>>  };
>> @@ -548,6 +554,14 @@ static int imx7_csi_pad_link_validate(struct v4l2_subdev *sd,
>>  	if (ret)
>>  		return ret;
>>
>> +	if (csi->soc_id == IMX6UL) {
>> +		mutex_lock(&csi->lock);
>> +		csi->is_csi2 = false;
>> +		mutex_unlock(&csi->lock);
>> +
>> +		return 0;
>> +	}
>> +
>>  	ret = imx7_csi_get_upstream_endpoint(csi, &upstream_ep, true);
>>  	if (ret) {
>>  		v4l2_err(&csi->sd, "failed to find upstream endpoint\n");
>> @@ -757,6 +771,7 @@ static int imx7_csi_configure(struct imx7_csi *csi)
>>  	struct v4l2_pix_format *out_pix = &vdev->fmt.fmt.pix;
>>  	__u32 in_code = csi->format_mbus[IMX7_CSI_PAD_SINK].code;
>>  	u32 cr1, cr18;
>> +	int width = out_pix->width;
>>
>>  	if (out_pix->field == V4L2_FIELD_INTERLACED) {
>>  		imx7_csi_deinterlace_enable(csi, true);
>> @@ -766,15 +781,27 @@ static int imx7_csi_configure(struct imx7_csi *csi)
>>  		imx7_csi_buf_stride_set(csi, 0);
>>  	}
>>
>> -	imx7_csi_set_imagpara(csi, out_pix->width, out_pix->height);
>> +	cr18 = imx7_csi_reg_read(csi, CSI_CSICR18);
>> +
>> +	if (!csi->is_csi2) {
>> +		if (out_pix->pixelformat == V4L2_PIX_FMT_UYVY ||
>> +		    out_pix->pixelformat == V4L2_PIX_FMT_YUYV)
>> +			width *= 2;
>> +
>> +		imx7_csi_set_imagpara(csi, width, out_pix->height);
>> +
>> +		cr18 |= (BIT_BASEADDR_SWITCH_EN | BIT_BASEADDR_SWITCH_SEL |
>> +			BIT_BASEADDR_CHG_ERR_EN);
>> +		imx7_csi_reg_write(csi, cr18, CSI_CSICR18);
>>
>> -	if (!csi->is_csi2)
>>  		return 0;
>> +	}
>> +
>> +	imx7_csi_set_imagpara(csi, width, out_pix->height);
>>
>>  	cr1 = imx7_csi_reg_read(csi, CSI_CSICR1);
>>  	cr1 &= ~BIT_GCLK_MODE;
>>
>> -	cr18 = imx7_csi_reg_read(csi, CSI_CSICR18);
>>  	cr18 &= BIT_MIPI_DATA_FORMAT_MASK;
>>  	cr18 |= BIT_DATA_FROM_MIPI;
>>
>> @@ -809,11 +836,9 @@ static void imx7_csi_enable(struct imx7_csi *csi)
>>  {
>>  	imx7_csi_sw_reset(csi);
>>
>> -	if (csi->is_csi2) {
>> -		imx7_csi_dmareq_rff_enable(csi);
>> -		imx7_csi_hw_enable_irq(csi);
>> -		imx7_csi_hw_enable(csi);
>> -	}
>> +	imx7_csi_dmareq_rff_enable(csi);
>> +	imx7_csi_hw_enable_irq(csi);
>> +	imx7_csi_hw_enable(csi);
>>  }
>>
>>  static void imx7_csi_disable(struct imx7_csi *csi)
>> @@ -1166,19 +1191,32 @@ static int imx7_csi_parse_endpoint(struct device *dev,
>>  	return fwnode_device_is_available(asd->match.fwnode) ? 0 : -EINVAL;
>>  }
>>
>> +static const struct of_device_id imx7_csi_of_match[] = {
>> +	{ .compatible = "fsl,imx7-csi", .data = (void *)IMX7 },
>> +	{ .compatible = "fsl,imx6ul-csi", .data = (void *)IMX6UL },
> 
> looking at this again I think we can do this is a different way.
> Instead data being the soc_id, just set here if it is_csi2 or not.
> 
> This would avoid to add a soc_id  to the struct that it really it
> is used only to setup the is_csi2 var. I think this will make this
> patch a lot simpler.

Well, I have added this soc_id because imx7_csi_get_upstream_endpoint in
imx7_csi_pad_link_validate fails:

[  366.549768] csi: failed to find upstream endpoint
[  366.556274] csi: pipeline start failed with -19

My pipeline is:

Device topology
- entity 1: csi (2 pads, 2 links)
            type V4L2 subdev subtype Unknown flags 0
            device node name /dev/v4l-subdev0
        pad0: Sink
                [fmt:UYVY8_2X8/640x480 field:none colorspace:srgb
xfer:srgb ycbcr:601 quantization:full-range]
                <- "ov5640 1-003c":0 [ENABLED]
        pad1: Source
                [fmt:UYVY8_2X8/640x480 field:none colorspace:srgb
xfer:srgb ycbcr:601 quantization:full-range]
                -> "csi capture":0 [ENABLED]

- entity 4: csi capture (1 pad, 1 link)
            type Node subtype V4L flags 0
            device node name /dev/video1
        pad0: Sink
                <- "csi":1 [ENABLED]

- entity 10: ov5640 1-003c (1 pad, 1 link)
             type V4L2 subdev subtype Sensor flags 0
             device node name /dev/v4l-subdev1
        pad0: Source
                [fmt:UYVY8_2X8/640x480 at 1/30 field:none colorspace:srgb
xfer:srgb ycbcr:601 quantization:full-range]
                -> "csi":0 [ENABLED]


Maybe we should fix this ?

Regards,

> 
>> +	{ },
>> +};
>> +MODULE_DEVICE_TABLE(of, imx7_csi_of_match);
>> +
>>  static int imx7_csi_probe(struct platform_device *pdev)
>>  {
>>  	struct device *dev = &pdev->dev;
>>  	struct device_node *node = dev->of_node;
>>  	struct imx_media_dev *imxmd;
>>  	struct imx7_csi *csi;
>> +	const struct of_device_id *of_id;
>>  	int ret;
>>
>> +	of_id = of_match_node(imx7_csi_of_match, node);
> 
> With the above said, here I think we can use the of_match_device?
> 
> hope this makes sense also to you.
> 
> Once again thanks for the patches.
> 
> ---
> Cheers,
>         Rui
> 
>> +	if (!of_id)
>> +		return -ENODEV;
>> +
>>  	csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL);
>>  	if (!csi)
>>  		return -ENOMEM;
>>
>>  	csi->dev = dev;
>> +	csi->soc_id = (enum csi_soc_id)of_id->data;
>>
>>  	csi->mclk = devm_clk_get(&pdev->dev, "mclk");
>>  	if (IS_ERR(csi->mclk)) {
>> @@ -1294,12 +1332,6 @@ static int imx7_csi_remove(struct platform_device *pdev)
>>  	return 0;
>>  }
>>
>> -static const struct of_device_id imx7_csi_of_match[] = {
>> -	{ .compatible = "fsl,imx7-csi" },
>> -	{ },
>> -};
>> -MODULE_DEVICE_TABLE(of, imx7_csi_of_match);
>> -
>>  static struct platform_driver imx7_csi_driver = {
>>  	.probe = imx7_csi_probe,
>>  	.remove = imx7_csi_remove,
> 


-- 
Sébastien Szymanski
Software engineer, Armadeus Systems
Tel: +33 (0)9 72 29 41 44
Fax: +33 (0)9 72 28 79 26


More information about the devel mailing list