[PATCH v2 1/2] dt-bindings: iio: adc: add adi, ad7780.yaml binding

Renato Lui Geh renatogeh at gmail.com
Wed Jun 5 20:35:56 UTC 2019


On 05/26, Jonathan Cameron wrote:
>On Fri, 24 May 2019 22:26:30 -0300
>Renato Lui Geh <renatogeh at gmail.com> wrote:
>
>> This patch adds a YAML binding for the Analog Devices AD7780/1 and
>> AD7170/1 analog-to-digital converters.
>>
>> Signed-off-by: Renato Lui Geh <renatogeh at gmail.com>
>Looks good to me, but I'm still finding my feet with these so will
>leave it for a few days for others to have time to comment.
>
>Michael, looking for a quick reply from you to say if you are happy
>being explicitly listed as maintainer for this one, or if you'd
>rather land it on someone else.  Same applies for patch 2.
>
>Renato, if I seem to have forgotten this in a week or so, feel
>free to give me a poke. I've been known to loose patches entirely!

Hi Jonathan,

Just here to give you a poke. :)

By the way, in these cases, which would be easier for you? To send you
an email like I'm doing right now on last week's thread; or to resend
the entire patch(set)?

Thanks,
Renato
>
>Thanks,
>
>Jonathan
>> ---
>> Changes in v2:
>>  - vref-supply to avdd-supply
>>  - remove avdd-supply from required list
>>  - include adc block in an spi block
>>
>>  .../bindings/iio/adc/adi,ad7780.txt           | 48 ----------
>>  .../bindings/iio/adc/adi,ad7780.yaml          | 87 +++++++++++++++++++
>>  2 files changed, 87 insertions(+), 48 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
>>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
>> deleted file mode 100644
>> index 440e52555349..000000000000
>> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
>> +++ /dev/null
>> @@ -1,48 +0,0 @@
>> -* Analog Devices AD7170/AD7171/AD7780/AD7781
>> -
>> -Data sheets:
>> -
>> -- AD7170:
>> -	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
>> -- AD7171:
>> -	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
>> -- AD7780:
>> -	* https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
>> -- AD7781:
>> -	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
>> -
>> -Required properties:
>> -
>> -- compatible: should be one of
>> -	* "adi,ad7170"
>> -	* "adi,ad7171"
>> -	* "adi,ad7780"
>> -	* "adi,ad7781"
>> -- reg: spi chip select number for the device
>> -- vref-supply: the regulator supply for the ADC reference voltage
>> -
>> -Optional properties:
>> -
>> -- powerdown-gpios:  must be the device tree identifier of the PDRST pin. If
>> -		    specified, it will be asserted during driver probe. As the
>> -		    line is active high, it should be marked GPIO_ACTIVE_HIGH.
>> -- adi,gain-gpios:   must be the device tree identifier of the GAIN pin. Only for
>> -		    the ad778x chips. If specified, it will be asserted during
>> -		    driver probe. As the line is active low, it should be marked
>> -		    GPIO_ACTIVE_LOW.
>> -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
>> -		    for the ad778x chips. If specified, it will be asserted
>> -		    during driver probe. As the line is active low, it should be
>> -		    marked GPIO_ACTIVE_LOW.
>> -
>> -Example:
>> -
>> -adc at 0 {
>> -	compatible =  "adi,ad7780";
>> -	reg =	      <0>;
>> -	vref-supply = <&vdd_supply>
>> -
>> -	powerdown-gpios  = <&gpio 12 GPIO_ACTIVE_HIGH>;
>> -	adi,gain-gpios   = <&gpio  5 GPIO_ACTIVE_LOW>;
>> -	adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
>> -};
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
>> new file mode 100644
>> index 000000000000..d1109416963c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
>> +
>> +maintainers:
>> +  - Michael Hennerich <michael.hennerich at analog.com>
>> +
>> +description: |
>> +  The ad7780 is a sigma-delta analog to digital converter. This driver provides
>> +  reading voltage values and status bits from both the ad778x and ad717x series.
>> +  Its interface also allows writing on the FILTER and GAIN GPIO pins on the
>> +  ad778x.
>> +
>> +  Specifications on the converters can be found at:
>> +    AD7170:
>> +      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
>> +    AD7171:
>> +      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
>> +    AD7780:
>> +      https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
>> +    AD7781:
>> +      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - adi,ad7170
>> +      - adi,ad7171
>> +      - adi,ad7780
>> +      - adi,ad7781
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  avdd-supply:
>> +    description:
>> +      The regulator supply for the ADC reference voltage.
>> +    maxItems: 1
>> +
>> +  powerdown-gpios:
>> +    description:
>> +      Must be the device tree identifier of the PDRST pin. If
>> +      specified, it will be asserted during driver probe. As the
>> +      line is active high, it should be marked GPIO_ACTIVE_HIGH.
>> +    maxItems: 1
>> +
>> +  adi,gain-gpios:
>> +    description:
>> +      Must be the device tree identifier of the GAIN pin. Only for
>> +      the ad778x chips. If specified, it will be asserted during
>> +      driver probe. As the line is active low, it should be marked
>> +      GPIO_ACTIVE_LOW.
>> +    maxItems: 1
>> +
>> +  adi,filter-gpios:
>> +    description:
>> +      Must be the device tree identifier of the FILTER pin. Only
>> +      for the ad778x chips. If specified, it will be asserted
>> +      during driver probe. As the line is active low, it should be
>> +      marked GPIO_ACTIVE_LOW.
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +    spi0 {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        adc at 0 {
>> +            compatible = "adi,ad7780";
>> +            reg = <0>;
>> +
>> +            avdd-supply      = <&vdd_supply>;
>> +            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
>> +            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
>> +            adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
>> +        };
>> +    };
>


More information about the devel mailing list