[PATCH v11 00/13] media: staging/imx7: add i.MX7 media driver

Sakari Ailus sakari.ailus at linux.intel.com
Wed Jan 30 12:41:26 UTC 2019


On Thu, Jan 24, 2019 at 04:09:15PM +0000, Rui Miguel Silva wrote:
> Hi,
> This series introduces the Media driver to work with the i.MX7 SoC. it uses the
> already existing imx media core drivers but since the i.MX7, contrary to
> i.MX5/6, do not have an IPU and because of that some changes in the imx media
> core are made along this series to make it support that case.
> 
> This patches adds CSI and MIPI-CSI2 drivers for i.MX7, along with several
> configurations changes for this to work as a capture subsystem. Some bugs are
> also fixed along the line. And necessary documentation.
> 
> For a more detailed view of the capture paths, pads links in the i.MX7 please
> take a look at the documentation in PATCH 10.
> 
> The system used to test and develop this was the Warp7 board with an OV2680
> sensor, which output format is 10-bit bayer. So, only MIPI interface was
> tested, a scenario with an parallel input would nice to have.
> 
> Bellow goes an example of the output of the pads and links and the output of
> v4l2-compliance testing.
> 
> The v4l-utils version used is:
> v4l2-compliance SHA: 1a6c8fe9a65c26e78ba34bd4aa2df28ede7d00cb, 32 bits
> 
> The Media Driver fail some tests but this failures are coming from code out of
> scope of this series (imx-capture), and some from the sensor OV2680
> but that I think not related with the sensor driver but with the testing and
> core.
> 
> The csi and mipi-csi entities pass all compliance tests.

For patches 1, 4 and 10--13:

Acked-by: Sakari Ailus <sakari.ailus at linux.intel.com>

-- 
Sakari Ailus
sakari.ailus at linux.intel.com


More information about the devel mailing list