[PATCH v4 3/3] media: imx: prpencvf: Stop upstream before disabling IDMA channel

Steve Longerbeam slongerbeam at gmail.com
Mon Jan 21 23:35:52 UTC 2019


Upstream must be stopped immediately after receiving the last EOF and
before disabling the IDMA channel. This can be accomplished by moving
upstream stream off to just after receiving the last EOF completion in
prp_stop(). For symmetry also move upstream stream on to end of
prp_start().

This fixes a complete system hard lockup on the SabreAuto when streaming
from the ADV7180, by repeatedly sending a stream off immediately followed
by stream on:

while true; do v4l2-ctl  -d1 --stream-mmap --stream-count=3; done

Eventually this either causes the system lockup or EOF timeouts at all
subsequent stream on, until a system reset.

The lockup occurs when disabling the IDMA channel at stream off. Stopping
the video data stream entering the IDMA channel before disabling the
channel itself appears to be a reliable fix for the hard lockup.

Fixes: f0d9c8924e2c3 ("[media] media: imx: Add IC subdev drivers")

Reported-by: Gaël PORTAY <gael.portay at collabora.com>
Tested-by: Gaël PORTAY <gael.portay at collabora.com>
Signed-off-by: Steve Longerbeam <slongerbeam at gmail.com>
Cc: stable at vger.kernel.org
---
Changes in v4:
- none.
Changes in v3:
- Reword the commit subject and message. No functional changes.
Changes in v2:
- Add Fixes: and Cc: stable
---
 drivers/staging/media/imx/imx-ic-prpencvf.c | 26 ++++++++++++++-------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/media/imx/imx-ic-prpencvf.c b/drivers/staging/media/imx/imx-ic-prpencvf.c
index 053a911d477a..3637693c2bc8 100644
--- a/drivers/staging/media/imx/imx-ic-prpencvf.c
+++ b/drivers/staging/media/imx/imx-ic-prpencvf.c
@@ -706,12 +706,23 @@ static int prp_start(struct prp_priv *priv)
 		goto out_free_nfb4eof_irq;
 	}
 
+	/* start upstream */
+	ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 1);
+	ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
+	if (ret) {
+		v4l2_err(&ic_priv->sd,
+			 "upstream stream on failed: %d\n", ret);
+		goto out_free_eof_irq;
+	}
+
 	/* start the EOF timeout timer */
 	mod_timer(&priv->eof_timeout_timer,
 		  jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
 
 	return 0;
 
+out_free_eof_irq:
+	devm_free_irq(ic_priv->dev, priv->eof_irq, priv);
 out_free_nfb4eof_irq:
 	devm_free_irq(ic_priv->dev, priv->nfb4eof_irq, priv);
 out_unsetup:
@@ -743,6 +754,12 @@ static void prp_stop(struct prp_priv *priv)
 	if (ret == 0)
 		v4l2_warn(&ic_priv->sd, "wait last EOF timeout\n");
 
+	/* stop upstream */
+	ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 0);
+	if (ret && ret != -ENOIOCTLCMD)
+		v4l2_warn(&ic_priv->sd,
+			  "upstream stream off failed: %d\n", ret);
+
 	devm_free_irq(ic_priv->dev, priv->eof_irq, priv);
 	devm_free_irq(ic_priv->dev, priv->nfb4eof_irq, priv);
 
@@ -1173,15 +1190,6 @@ static int prp_s_stream(struct v4l2_subdev *sd, int enable)
 	if (ret)
 		goto out;
 
-	/* start/stop upstream */
-	ret = v4l2_subdev_call(priv->src_sd, video, s_stream, enable);
-	ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0;
-	if (ret) {
-		if (enable)
-			prp_stop(priv);
-		goto out;
-	}
-
 update_count:
 	priv->stream_count += enable ? 1 : -1;
 	if (priv->stream_count < 0)
-- 
2.17.1



More information about the devel mailing list