[PATCH v3 1/4] staging: mt7621-pci-phy: add new driver for phy part of mt7621-pci
Sergio Paracuellos
sergio.paracuellos at gmail.com
Fri Feb 15 05:59:56 UTC 2019
On Fri, Feb 15, 2019 at 6:44 AM NeilBrown <neil at brown.name> wrote:
>
> On Fri, Jan 04 2019, Sergio Paracuellos wrote:
>
> > Phy part of the pci for this SoC can be handled using a generic phy
> > driver. This commit extracts phy part of the mt7621-pci into a new
> > 'mt7621-pci-phy' driver.
> >
> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
> > ---
> > drivers/staging/Kconfig | 2 +
> > drivers/staging/Makefile | 1 +
> > drivers/staging/mt7621-pci-phy/Kconfig | 7 +
> > drivers/staging/mt7621-pci-phy/Makefile | 1 +
> > drivers/staging/mt7621-pci-phy/TODO | 4 +
> > .../staging/mt7621-pci-phy/pci-mt7621-phy.c | 387 ++++++++++++++++++
> > 6 files changed, 402 insertions(+)
> > create mode 100644 drivers/staging/mt7621-pci-phy/Kconfig
> > create mode 100644 drivers/staging/mt7621-pci-phy/Makefile
> > create mode 100644 drivers/staging/mt7621-pci-phy/TODO
> > create mode 100644 drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
> >
> > diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> > index e4f608815c05..4a3d6e00f7cb 100644
> > --- a/drivers/staging/Kconfig
> > +++ b/drivers/staging/Kconfig
> > @@ -104,6 +104,8 @@ source "drivers/staging/pi433/Kconfig"
> >
> > source "drivers/staging/mt7621-pci/Kconfig"
> >
> > +source "drivers/staging/mt7621-pci-phy/Kconfig"
> > +
> > source "drivers/staging/mt7621-pinctrl/Kconfig"
> >
> > source "drivers/staging/mt7621-spi/Kconfig"
> > diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> > index 5868631e8f1b..413890dd5a14 100644
> > --- a/drivers/staging/Makefile
> > +++ b/drivers/staging/Makefile
> > @@ -42,6 +42,7 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_services/
> > obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
> > obj-$(CONFIG_PI433) += pi433/
> > obj-$(CONFIG_SOC_MT7621) += mt7621-pci/
> > +obj-$(CONFIG_SOC_MT7621) += mt7621-pci-phy/
> > obj-$(CONFIG_SOC_MT7621) += mt7621-pinctrl/
> > obj-$(CONFIG_SOC_MT7621) += mt7621-spi/
> > obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
> > diff --git a/drivers/staging/mt7621-pci-phy/Kconfig b/drivers/staging/mt7621-pci-phy/Kconfig
> > new file mode 100644
> > index 000000000000..b9f6ab784ee8
> > --- /dev/null
> > +++ b/drivers/staging/mt7621-pci-phy/Kconfig
> > @@ -0,0 +1,7 @@
> > +config PCI_MT7621_PHY
> > + tristate "MediaTek MT7621 PCI PHY Driver"
> > + depends on RALINK && OF
> > + select GENERIC_PHY
> > + help
> > + Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
> > +
> > diff --git a/drivers/staging/mt7621-pci-phy/Makefile b/drivers/staging/mt7621-pci-phy/Makefile
> > new file mode 100644
> > index 000000000000..2b82ccfc28c6
> > --- /dev/null
> > +++ b/drivers/staging/mt7621-pci-phy/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_SOC_MT7621) += pci-mt7621-phy.o
> > diff --git a/drivers/staging/mt7621-pci-phy/TODO b/drivers/staging/mt7621-pci-phy/TODO
> > new file mode 100644
> > index 000000000000..a255e8f753eb
> > --- /dev/null
> > +++ b/drivers/staging/mt7621-pci-phy/TODO
> > @@ -0,0 +1,4 @@
> > +
> > +- general code review and cleanup
> > +
> > +Cc: NeilBrown <neil at brown.name> and Sergio Paracuellos <sergio.paracuellos at gmail.com>
> > diff --git a/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c b/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
> > new file mode 100644
> > index 000000000000..3d16716cfebc
> > --- /dev/null
> > +++ b/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
> > @@ -0,0 +1,387 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Mediatek MT7621 PCI PHY Driver
> > + * Author: Sergio Paracuellos <sergio.paracuellos at gmail.com>
> > + */
> > +
> > +#include <dt-bindings/phy/phy.h>
> > +#include <linux/bitops.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <mt7621.h>
> > +#include <ralink_regs.h>
> > +
> > +#define RALINK_CLKCFG1 0x30
> > +#define CHIP_REV_MT7621_E2 0x0101
> > +
> > +#define PCIE_PORT_CLK_EN(x) BIT(24 + (x))
> > +
> > +#define RG_PE1_PIPE_REG 0x02c
> > +#define RG_PE1_PIPE_RST BIT(12)
> > +#define RG_PE1_PIPE_CMD_FRC BIT(4)
> > +
> > +#define RG_P0_TO_P1_WIDTH 0x100
> > +#define RG_PE1_H_LCDDS_REG 0x49c
> > +#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0)
> > +#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0)
> > +
> > +#define RG_PE1_FRC_H_XTAL_REG 0x400
> > +#define RG_PE1_FRC_H_XTAL_TYPE BIT(8)
> > +#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9)
> > +#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9)
> > +
> > +#define RG_PE1_FRC_PHY_REG 0x000
> > +#define RG_PE1_FRC_PHY_EN BIT(4)
> > +#define RG_PE1_PHY_EN BIT(5)
> > +
> > +#define RG_PE1_H_PLL_REG 0x490
> > +#define RG_PE1_H_PLL_BC GENMASK(23, 22)
> > +#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22)
> > +#define RG_PE1_H_PLL_BP GENMASK(21, 18)
> > +#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18)
> > +#define RG_PE1_H_PLL_IR GENMASK(15, 12)
> > +#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12)
> > +#define RG_PE1_H_PLL_IC GENMASK(11, 8)
> > +#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8)
> > +#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6)
> > +#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6)
> > +#define RG_PE1_PLL_DIVEN GENMASK(3, 1)
> > +#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1)
> > +
> > +#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc
> > +#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4)
> > +#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4)
> > +
> > +#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4
> > +#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0)
> > +#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0)
> > +
> > +#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8
> > +#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0)
> > +#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0)
> > +#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16)
> > +#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16)
> > +
> > +#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0
> > +#define RG_PE1_LCDDS_CLK_PH_INV BIT(5)
> > +
> > +#define RG_PE1_H_PLL_BR_REG 0x4ac
> > +#define RG_PE1_H_PLL_BR GENMASK(18, 16)
> > +#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16)
> > +
> > +#define RG_PE1_MSTCKDIV_REG 0x414
> > +#define RG_PE1_MSTCKDIV GENMASK(7, 6)
> > +#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6)
> > +
> > +#define RG_PE1_FRC_MSTCKDIV BIT(5)
> > +
> > +/**
> > + * struct mt7621_pci_phy_instance - Mt7621 Pcie PHY device
> > + * @phy: pointer to the kernel PHY device
> > + * @port_base: base register
> > + * @index: internal ID to identify the Mt7621 PCIe PHY
> > + */
> > +struct mt7621_pci_phy_instance {
> > + struct phy *phy;
> > + void __iomem *port_base;
> > + u32 index;
> > +};
> > +
> > +/**
> > + * struct mt7621_pci_phy - Mt7621 Pcie PHY core
> > + * @dev: pointer to device
> > + * @phys: pointer to Mt7621 PHY device
> > + * @nphys: number of PHY devices for this core
> > + */
> > +struct mt7621_pci_phy {
> > + struct device *dev;
> > + struct mt7621_pci_phy_instance **phys;
> > + int nphys;
> > +};
> > +
> > +static inline u32 phy_read(struct mt7621_pci_phy_instance *instance, u32 reg)
> > +{
> > + return readl(instance->port_base + reg);
> > +}
> > +
> > +static inline void phy_write(struct mt7621_pci_phy_instance *instance,
> > + u32 val, u32 reg)
> > +{
> > + writel(val, instance->port_base + reg);
> > +}
> > +
> > +static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy,
> > + struct mt7621_pci_phy_instance *instance)
> > +{
> > + u32 offset = (instance->index != 1) ?
> > + RG_PE1_PIPE_REG : RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH;
> > + u32 reg;
> > +
> > + reg = phy_read(instance, offset);
> > + reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC);
> > + reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC);
> > + phy_write(instance, reg, offset);
> > +}
> > +
> > +static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy,
> > + struct mt7621_pci_phy_instance *instance)
> > +{
> > + struct device *dev = phy->dev;
> > + u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
> > + u32 offset;
> > + u32 val;
> > +
> > + reg = (reg >> 6) & 0x7;
> > + /* Set PCIe Port PHY to disable SSC */
> > + /* Debug Xtal Type */
> > + val = phy_read(instance, RG_PE1_FRC_H_XTAL_REG);
> > + val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE);
> > + val |= RG_PE1_FRC_H_XTAL_TYPE;
> > + val |= RG_PE1_H_XTAL_TYPE_VAL(0x00);
> > + phy_write(instance, val, RG_PE1_FRC_H_XTAL_REG);
> > +
> > + /* disable port */
> > + offset = (instance->index != 1) ?
> > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
> > + val = phy_read(instance, offset);
> > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
> > + val |= RG_PE1_FRC_PHY_EN;
> > + phy_write(instance, val, offset);
> > +
> > + /* Set Pre-divider ratio (for host mode) */
> > + val = phy_read(instance, RG_PE1_H_PLL_REG);
> > + val &= ~(RG_PE1_H_PLL_PREDIV);
> > +
> > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
> > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x01);
> > + phy_write(instance, val, RG_PE1_H_PLL_REG);
> > + dev_info(dev, "Xtal is 40MHz\n");
> > + } else { /* 25MHz | 20MHz Xtal */
> > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x00);
> > + phy_write(instance, val, RG_PE1_H_PLL_REG);
> > + if (reg >= 6) {
> > + dev_info(dev, "Xtal is 25MHz\n");
> > +
> > + /* Select feedback clock */
> > + val = phy_read(instance, RG_PE1_H_PLL_FBKSEL_REG);
> > + val &= ~(RG_PE1_H_PLL_FBKSEL);
> > + val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01);
> > + phy_write(instance, val, RG_PE1_H_PLL_FBKSEL_REG);
> > +
> > + /* DDS NCPO PCW (for host mode) */
> > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG);
> > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD);
> > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000);
> > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG);
> > +
> > + /* DDS SSC dither period control */
> > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG);
> > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD);
> > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d);
> > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG);
> > +
> > + /* DDS SSC dither amplitude control */
> > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_DELTA_REG);
> > + val &= ~(RG_PE1_H_LCDDS_SSC_DELTA |
> > + RG_PE1_H_LCDDS_SSC_DELTA1);
> > + val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a);
> > + val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a);
> > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_DELTA_REG);
> > + } else {
> > + dev_info(dev, "Xtal is 20MHz\n");
> > + }
> > + }
> > +
> > + /* DDS clock inversion */
> > + val = phy_read(instance, RG_PE1_LCDDS_CLK_PH_INV_REG);
> > + val &= ~(RG_PE1_LCDDS_CLK_PH_INV);
> > + val |= RG_PE1_LCDDS_CLK_PH_INV;
> > + phy_write(instance, val, RG_PE1_LCDDS_CLK_PH_INV_REG);
> > +
> > + /* Set PLL bits */
> > + val = phy_read(instance, RG_PE1_H_PLL_REG);
> > + val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
> > + RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN);
> > + val |= RG_PE1_H_PLL_BC_VAL(0x02);
> > + val |= RG_PE1_H_PLL_BP_VAL(0x06);
> > + val |= RG_PE1_H_PLL_IR_VAL(0x02);
> > + val |= RG_PE1_H_PLL_IC_VAL(0x01);
> > + val |= RG_PE1_PLL_DIVEN_VAL(0x02);
> > + phy_write(instance, val, RG_PE1_H_PLL_REG);
> > +
> > + val = phy_read(instance, RG_PE1_H_PLL_BR_REG);
> > + val &= ~(RG_PE1_H_PLL_BR);
> > + val |= RG_PE1_H_PLL_BR_VAL(0x00);
> > + phy_write(instance, val, RG_PE1_H_PLL_BR_REG);
> > +
> > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
> > + /* set force mode enable of da_pe1_mstckdiv */
> > + val = phy_read(instance, RG_PE1_MSTCKDIV_REG);
> > + val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV);
> > + val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV);
> > + phy_write(instance, val, RG_PE1_MSTCKDIV_REG);
> > + }
> > +}
> > +
> > +static int mt7621_pci_phy_init(struct phy *phy)
> > +{
> > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
> > + struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent);
> > + u32 chip_rev_id = rt_sysc_r32(SYSC_REG_CHIP_REV);
> > +
> > + if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2)
> > + mt7621_bypass_pipe_rst(mphy, instance);
> > +
> > + mt7621_set_phy_for_ssc(mphy, instance);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt7621_pci_phy_power_on(struct phy *phy)
> > +{
> > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
> > + u32 offset = (instance->index != 1) ?
> > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
> > + u32 val;
> > +
> > + /* Enable PHY and disable force mode */
> > + val = phy_read(instance, offset);
> > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
> > + val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
> > + phy_write(instance, val, offset);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt7621_pci_phy_power_off(struct phy *phy)
> > +{
> > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
> > + u32 offset = (instance->index != 1) ?
> > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
> > + u32 val;
> > +
> > + /* Disable PHY */
> > + val = phy_read(instance, offset);
> > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
> > + val |= RG_PE1_FRC_PHY_EN;
> > + phy_write(instance, val, offset);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt7621_pci_phy_exit(struct phy *phy)
> > +{
> > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
> > +
> > + rt_sysc_m32(PCIE_PORT_CLK_EN(instance->index), 0, RALINK_CLKCFG1);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops mt7621_pci_phy_ops = {
> > + .init = mt7621_pci_phy_init,
> > + .exit = mt7621_pci_phy_exit,
> > + .power_on = mt7621_pci_phy_power_on,
> > + .power_off = mt7621_pci_phy_power_off,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static int mt7621_pci_phy_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + struct device_node *child_np;
> > + struct phy_provider *provider;
> > + struct mt7621_pci_phy *phy;
> > + struct resource res;
> > + int port, ret;
> > + void __iomem *port_base;
> > +
> > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> > + if (!phy)
> > + return -ENOMEM;
> > +
> > + phy->nphys = of_get_child_count(np);
> > + phy->phys = devm_kcalloc(dev, phy->nphys,
> > + sizeof(*phy->phys), GFP_KERNEL);
> > + if (!phy->phys)
> > + return -ENOMEM;
> > +
> > + phy->dev = dev;
> > + platform_set_drvdata(pdev, phy);
> > +
> > + ret = of_address_to_resource(np, 0, &res);
> > + if (ret) {
> > + dev_err(dev, "failed to get address resource(id-%d)\n", port);
> > + return ret;
> > + }
> > +
> > + port_base = devm_ioremap_resource(dev, &res);
> > + if (IS_ERR(port_base)) {
> > + dev_err(dev, "failed to remap phy regs\n");
> > + return PTR_ERR(port_base);
> > + }
> > +
> > + port = 0;
> > + for_each_child_of_node(np, child_np) {
> > + struct mt7621_pci_phy_instance *instance;
> > + struct phy *pphy;
> > +
> > + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
> > + if (!instance) {
> > + ret = -ENOMEM;
> > + goto put_child;
> > + }
> > +
> > + phy->phys[port] = instance;
> > +
> > + pphy = devm_phy_create(dev, child_np, &mt7621_pci_phy_ops);
> > + if (IS_ERR(phy)) {
> > + dev_err(dev, "failed to create phy\n");
> > + ret = PTR_ERR(phy);
> > + goto put_child;
> > + }
> > +
> > + instance->port_base = port_base;
> > + instance->phy = pphy;
> > + instance->index = port;
> > + phy_set_drvdata(pphy, instance);
> > + port++;
> > + }
> > +
> > + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > +
> > + return PTR_ERR_OR_ZERO(provider);
> > +
> > +put_child:
> > + of_node_put(child_np);
> > + return ret;
> > +}
> > +
> > +static const struct of_device_id mt7621_pci_phy_ids[] = {
> > + { .compatible = "mediatek,mt7621-pci-phy" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
> > +
> > +static struct platform_driver mt7621_pci_phy_driver = {
> > + .probe = mt7621_pci_phy_probe,
> > + .driver = {
> > + .name = "mt7621-pci-phy",
> > + .of_match_table = of_match_ptr(mt7621_pci_phy_ids),
> > + },
> > +};
> > +
> > +static int __init mt7621_pci_phy_drv_init(void)
> > +{
> > + return platform_driver_register(&mt7621_pci_phy_driver);
> > +}
> > +
> > +arch_initcall(mt7621_pci_phy_drv_init);
>
> This doesn't work as arch_initcall(). It causes phy_create() to be
> called before the phy module is initialized, so 'phy_class' is NULL, the
> new phy isn't placed in the right class, and it cannot be found.
>
> I changed to module_init() and it works.
I see. Thanks for letting me know. I will fix and send this minor
change as a fix patch.
Thanks for your effort in testing this.
>
> Thanks,
> NeilBrown
Best regards,
Sergio Paracuellos
>
>
> > +
> > +MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos at gmail.com>");
> > +MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.19.1
More information about the devel
mailing list