[PATCH 3/4] [net-next] wan: remove old frame relay driver

Arnd Bergmann arnd at arndb.de
Mon Dec 9 15:12:55 UTC 2019


The DLCI framework and SDLA driver are as obsolete as it gets,
this is an ISA add-on card from the mid-1990s that has only
seen sporadic cleanups.

The website listed for downloading the user space tools has dropped
off the internet at some point around 2010, but Debian already
dropped the packages ten years earlier when they no longer built
correctly.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
 Documentation/networking/framerelay.txt |   39 -
 MAINTAINERS                             |    6 -
 drivers/net/wan/Kconfig                 |   45 -
 drivers/net/wan/Makefile                |    2 -
 drivers/net/wan/dlci.c                  |  542 --------
 drivers/net/wan/sdla.c                  | 1655 -----------------------
 include/Kbuild                          |    1 -
 include/linux/if_frad.h                 |   92 --
 include/linux/sdla.h                    |  240 ----
 include/uapi/linux/if_frad.h            |  123 --
 include/uapi/linux/sdla.h               |  117 --
 net/socket.c                            |   25 -
 12 files changed, 2887 deletions(-)
 delete mode 100644 Documentation/networking/framerelay.txt
 delete mode 100644 drivers/net/wan/dlci.c
 delete mode 100644 drivers/net/wan/sdla.c
 delete mode 100644 include/linux/if_frad.h
 delete mode 100644 include/linux/sdla.h
 delete mode 100644 include/uapi/linux/if_frad.h
 delete mode 100644 include/uapi/linux/sdla.h

diff --git a/Documentation/networking/framerelay.txt b/Documentation/networking/framerelay.txt
deleted file mode 100644
index 1a0b720440dd..000000000000
--- a/Documentation/networking/framerelay.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Frame Relay (FR) support for linux is built into a two tiered system of device 
-drivers.  The upper layer implements RFC1490 FR specification, and uses the
-Data Link Connection Identifier (DLCI) as its hardware address.  Usually these
-are assigned by your network supplier, they give you the number/numbers of
-the Virtual Connections (VC) assigned to you.
-
-Each DLCI is a point-to-point link between your machine and a remote one.
-As such, a separate device is needed to accommodate the routing.  Within the
-net-tools archives is 'dlcicfg'.  This program will communicate with the
-base "DLCI" device, and create new net devices named 'dlci00', 'dlci01'... 
-The configuration script will ask you how many DLCIs you need, as well as
-how many DLCIs you want to assign to each Frame Relay Access Device (FRAD).
-
-The DLCI uses a number of function calls to communicate with the FRAD, all
-of which are stored in the FRAD's private data area.  assoc/deassoc, 
-activate/deactivate and dlci_config.  The DLCI supplies a receive function
-to the FRAD to accept incoming packets.
-
-With this initial offering, only 1 FRAD driver is available.  With many thanks
-to Sangoma Technologies, David Mandelstam & Gene Kozin, the S502A, S502E & 
-S508 are supported.  This driver is currently set up for only FR, but as 
-Sangoma makes more firmware modules available, it can be updated to provide
-them as well.
-
-Configuration of the FRAD makes use of another net-tools program, 'fradcfg'.
-This program makes use of a configuration file (which dlcicfg can also read)
-to specify the types of boards to be configured as FRADs, as well as perform
-any board specific configuration.  The Sangoma module of fradcfg loads the
-FR firmware into the card, sets the irq/port/memory information, and provides
-an initial configuration.
-
-Additional FRAD device drivers can be added as hardware is available.
-
-At this time, the dlcicfg and fradcfg programs have not been incorporated into
-the net-tools distribution.  They can be found at ftp.invlogic.com, in 
-/pub/linux.  Note that with OS/2 FTPD, you end up in /pub by default, so just
-use 'cd linux'.  v0.10 is for use on pre-2.0.3 and earlier, v0.15 is for 
-pre-2.0.4 and later.
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a996ac26047..32fab6fbd301 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6436,12 +6436,6 @@ W:	http://floatingpoint.sourceforge.net/emulator/index.html
 S:	Maintained
 F:	arch/x86/math-emu/
 
-FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-L:	netdev at vger.kernel.org
-S:	Orphan
-F:	drivers/net/wan/dlci.c
-F:	drivers/net/wan/sdla.c
-
 FRAMEBUFFER LAYER
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
 L:	dri-devel at lists.freedesktop.org
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index e9ad63115144..74f2bd639b07 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -297,51 +297,6 @@ config IXP4XX_HSS
 	  Say Y here if you want to use built-in HSS ports
 	  on IXP4xx processor.
 
-config DLCI
-	tristate "Frame Relay DLCI support"
-	---help---
-	  Support for the Frame Relay protocol.
-
-	  Frame Relay is a fast low-cost way to connect to a remote Internet
-	  access provider or to form a private wide area network. The one
-	  physical line from your box to the local "switch" (i.e. the entry
-	  point to the Frame Relay network, usually at the phone company) can
-	  carry several logical point-to-point connections to other computers
-	  connected to the Frame Relay network. For a general explanation of
-	  the protocol, check out <http://www.mplsforum.org/>.
-
-	  To use frame relay, you need supporting hardware (called FRAD) and
-	  certain programs from the net-tools package as explained in
-	  <file:Documentation/networking/framerelay.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dlci.
-
-config DLCI_MAX
-	int "Max DLCI per device"
-	depends on DLCI
-	default "8"
-	help
-	  How many logical point-to-point frame relay connections (the
-	  identifiers of which are called DCLIs) should be handled by each
-	  of your hardware frame relay access devices.
-
-	  Go with the default.
-
-config SDLA
-	tristate "SDLA (Sangoma S502/S508) support"
-	depends on DLCI && ISA
-	help
-	  Driver for the Sangoma S502A, S502E, and S508 Frame Relay Access
-	  Devices.
-
-	  These are multi-protocol cards, but only Frame Relay is supported
-	  by the driver at this time. Please read
-	  <file:Documentation/networking/framerelay.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sdla.
-
 # X.25 network drivers
 config LAPBETHER
 	tristate "LAPB over Ethernet driver"
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 3059b9a279b3..4438a0c4a272 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -22,8 +22,6 @@ obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
 
-obj-$(CONFIG_DLCI)		+= dlci.o 
-obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
deleted file mode 100644
index 7bcee41905cf..000000000000
--- a/drivers/net/wan/dlci.c
+++ /dev/null
@@ -1,542 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DLCI		Implementation of Frame Relay protocol for Linux, according to
- *		RFC 1490.  This generic device provides en/decapsulation for an
- *		underlying hardware driver.  Routes & IPs are assigned to these
- *		interfaces.  Requires 'dlcicfg' program to create usable 
- *		interfaces, the initial one, 'dlci' is for IOCTL use only.
- *
- * Version:	@(#)dlci.c	0.35	4 Jan 1997
- *
- * Author:	Mike McLagan <mike.mclagan at linux.org>
- *
- * Changes:
- *
- *		0.15	Mike Mclagan	Packet freeing, bug in kmalloc call
- *					DLCI_RET handling
- *		0.20	Mike McLagan	More conservative on which packets
- *					are returned for retry and which are
- *					are dropped.  If DLCI_RET_DROP is
- *					returned from the FRAD, the packet is
- *				 	sent back to Linux for re-transmission
- *		0.25	Mike McLagan	Converted to use SIOC IOCTL calls
- *		0.30	Jim Freeman	Fixed to allow IPX traffic
- *		0.35	Michael Elizabeth	Fixed incorrect memcpy_fromfs
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_frad.h>
-#include <linux/bitops.h>
-
-#include <net/sock.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-
-static const char version[] = "DLCI driver v0.35, 4 Jan 1997, mike.mclagan at linux.org";
-
-static LIST_HEAD(dlci_devs);
-
-static void dlci_setup(struct net_device *);
-
-/* 
- * these encapsulate the RFC 1490 requirements as well as 
- * deal with packet transmission and reception, working with
- * the upper network layers 
- */
-
-static int dlci_header(struct sk_buff *skb, struct net_device *dev, 
-		       unsigned short type, const void *daddr,
-		       const void *saddr, unsigned len)
-{
-	struct frhdr		hdr;
-	unsigned int		hlen;
-	char			*dest;
-
-	hdr.control = FRAD_I_UI;
-	switch (type)
-	{
-		case ETH_P_IP:
-			hdr.IP_NLPID = FRAD_P_IP;
-			hlen = sizeof(hdr.control) + sizeof(hdr.IP_NLPID);
-			break;
-
-		/* feel free to add other types, if necessary */
-
-		default:
-			hdr.pad = FRAD_P_PADDING;
-			hdr.NLPID = FRAD_P_SNAP;
-			memset(hdr.OUI, 0, sizeof(hdr.OUI));
-			hdr.PID = htons(type);
-			hlen = sizeof(hdr);
-			break;
-	}
-
-	dest = skb_push(skb, hlen);
-	if (!dest)
-		return 0;
-
-	memcpy(dest, &hdr, hlen);
-
-	return hlen;
-}
-
-static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
-{
-	struct frhdr		*hdr;
-	int					process, header;
-
-	if (!pskb_may_pull(skb, sizeof(*hdr))) {
-		netdev_notice(dev, "invalid data no header\n");
-		dev->stats.rx_errors++;
-		kfree_skb(skb);
-		return;
-	}
-
-	hdr = (struct frhdr *) skb->data;
-	process = 0;
-	header = 0;
-	skb->dev = dev;
-
-	if (hdr->control != FRAD_I_UI)
-	{
-		netdev_notice(dev, "Invalid header flag 0x%02X\n",
-			      hdr->control);
-		dev->stats.rx_errors++;
-	}
-	else
-		switch (hdr->IP_NLPID)
-		{
-			case FRAD_P_PADDING:
-				if (hdr->NLPID != FRAD_P_SNAP)
-				{
-					netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
-						      hdr->NLPID);
-					dev->stats.rx_errors++;
-					break;
-				}
-	 
-				if (hdr->OUI[0] + hdr->OUI[1] + hdr->OUI[2] != 0)
-				{
-					netdev_notice(dev, "Unsupported organizationally unique identifier 0x%02X-%02X-%02X\n",
-						      hdr->OUI[0],
-						      hdr->OUI[1],
-						      hdr->OUI[2]);
-					dev->stats.rx_errors++;
-					break;
-				}
-
-				/* at this point, it's an EtherType frame */
-				header = sizeof(struct frhdr);
-				/* Already in network order ! */
-				skb->protocol = hdr->PID;
-				process = 1;
-				break;
-
-			case FRAD_P_IP:
-				header = sizeof(hdr->control) + sizeof(hdr->IP_NLPID);
-				skb->protocol = htons(ETH_P_IP);
-				process = 1;
-				break;
-
-			case FRAD_P_SNAP:
-			case FRAD_P_Q933:
-			case FRAD_P_CLNP:
-				netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
-					      hdr->pad);
-				dev->stats.rx_errors++;
-				break;
-
-			default:
-				netdev_notice(dev, "Invalid pad byte 0x%02X\n",
-					      hdr->pad);
-				dev->stats.rx_errors++;
-				break;				
-		}
-
-	if (process)
-	{
-		/* we've set up the protocol, so discard the header */
-		skb_reset_mac_header(skb);
-		skb_pull(skb, header);
-		dev->stats.rx_bytes += skb->len;
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-	}
-	else
-		dev_kfree_skb(skb);
-}
-
-static netdev_tx_t dlci_transmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	if (skb) {
-		struct netdev_queue *txq = skb_get_tx_queue(dev, skb);
-		netdev_start_xmit(skb, dlp->slave, txq, false);
-	}
-	return NETDEV_TX_OK;
-}
-
-static int dlci_config(struct net_device *dev, struct dlci_conf __user *conf, int get)
-{
-	struct dlci_conf	config;
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	dlp = netdev_priv(dev);
-
-	flp = netdev_priv(dlp->slave);
-
-	if (!get)
-	{
-		if (copy_from_user(&config, conf, sizeof(struct dlci_conf)))
-			return -EFAULT;
-		if (config.flags & ~DLCI_VALID_FLAGS)
-			return -EINVAL;
-		memcpy(&dlp->config, &config, sizeof(struct dlci_conf));
-		dlp->configured = 1;
-	}
-
-	err = (*flp->dlci_conf)(dlp->slave, dev, get);
-	if (err)
-		return err;
-
-	if (get)
-	{
-		if (copy_to_user(conf, &dlp->config, sizeof(struct dlci_conf)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int dlci_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct dlci_local *dlp;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	dlp = netdev_priv(dev);
-
-	switch (cmd)
-	{
-		case DLCI_GET_SLAVE:
-			if (!*(short *)(dev->dev_addr))
-				return -EINVAL;
-
-			strncpy(ifr->ifr_slave, dlp->slave->name, sizeof(ifr->ifr_slave));
-			break;
-
-		case DLCI_GET_CONF:
-		case DLCI_SET_CONF:
-			if (!*(short *)(dev->dev_addr))
-				return -EINVAL;
-
-			return dlci_config(dev, ifr->ifr_data, cmd == DLCI_GET_CONF);
-
-		default: 
-			return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int dlci_change_mtu(struct net_device *dev, int new_mtu)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	return dev_set_mtu(dlp->slave, new_mtu);
-}
-
-static int dlci_open(struct net_device *dev)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	dlp = netdev_priv(dev);
-
-	if (!*(short *)(dev->dev_addr))
-		return -EINVAL;
-
-	if (!netif_running(dlp->slave))
-		return -ENOTCONN;
-
-	flp = netdev_priv(dlp->slave);
-	err = (*flp->activate)(dlp->slave, dev);
-	if (err)
-		return err;
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static int dlci_close(struct net_device *dev)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	netif_stop_queue(dev);
-
-	dlp = netdev_priv(dev);
-
-	flp = netdev_priv(dlp->slave);
-	err = (*flp->deactivate)(dlp->slave, dev);
-
-	return 0;
-}
-
-static int dlci_add(struct dlci_add *dlci)
-{
-	struct net_device	*master, *slave;
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err = -EINVAL;
-
-
-	/* validate slave device */
-	slave = dev_get_by_name(&init_net, dlci->devname);
-	if (!slave)
-		return -ENODEV;
-
-	if (slave->type != ARPHRD_FRAD || netdev_priv(slave) == NULL)
-		goto err1;
-
-	/* create device name */
-	master = alloc_netdev(sizeof(struct dlci_local), "dlci%d",
-			      NET_NAME_UNKNOWN, dlci_setup);
-	if (!master) {
-		err = -ENOMEM;
-		goto err1;
-	}
-
-	/* make sure same slave not already registered */
-	rtnl_lock();
-	list_for_each_entry(dlp, &dlci_devs, list) {
-		if (dlp->slave == slave) {
-			err = -EBUSY;
-			goto err2;
-		}
-	}
-
-	*(short *)(master->dev_addr) = dlci->dlci;
-
-	dlp = netdev_priv(master);
-	dlp->slave = slave;
-	dlp->master = master;
-
-	flp = netdev_priv(slave);
-	err = (*flp->assoc)(slave, master);
-	if (err < 0)
-		goto err2;
-
-	err = register_netdevice(master);
-	if (err < 0) 
-		goto err2;
-
-	strcpy(dlci->devname, master->name);
-
-	list_add(&dlp->list, &dlci_devs);
-	rtnl_unlock();
-
-	return 0;
-
- err2:
-	rtnl_unlock();
-	free_netdev(master);
- err1:
-	dev_put(slave);
-	return err;
-}
-
-static int dlci_del(struct dlci_add *dlci)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	struct net_device	*master, *slave;
-	int			err;
-	bool			found = false;
-
-	rtnl_lock();
-
-	/* validate slave device */
-	master = __dev_get_by_name(&init_net, dlci->devname);
-	if (!master) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	list_for_each_entry(dlp, &dlci_devs, list) {
-		if (dlp->master == master) {
-			found = true;
-			break;
-		}
-	}
-	if (!found) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (netif_running(master)) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	dlp = netdev_priv(master);
-	slave = dlp->slave;
-	flp = netdev_priv(slave);
-
-	err = (*flp->deassoc)(slave, master);
-	if (!err) {
-		list_del(&dlp->list);
-
-		unregister_netdevice(master);
-
-		dev_put(slave);
-	}
-out:
-	rtnl_unlock();
-	return err;
-}
-
-static int dlci_ioctl(unsigned int cmd, void __user *arg)
-{
-	struct dlci_add add;
-	int err;
-	
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (copy_from_user(&add, arg, sizeof(struct dlci_add)))
-		return -EFAULT;
-
-	switch (cmd)
-	{
-		case SIOCADDDLCI:
-			err = dlci_add(&add);
-
-			if (!err)
-				if (copy_to_user(arg, &add, sizeof(struct dlci_add)))
-					return -EFAULT;
-			break;
-
-		case SIOCDELDLCI:
-			err = dlci_del(&add);
-			break;
-
-		default:
-			err = -EINVAL;
-	}
-
-	return err;
-}
-
-static const struct header_ops dlci_header_ops = {
-	.create	= dlci_header,
-};
-
-static const struct net_device_ops dlci_netdev_ops = {
-	.ndo_open	= dlci_open,
-	.ndo_stop	= dlci_close,
-	.ndo_do_ioctl	= dlci_dev_ioctl,
-	.ndo_start_xmit	= dlci_transmit,
-	.ndo_change_mtu	= dlci_change_mtu,
-};
-
-static void dlci_setup(struct net_device *dev)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	dev->flags		= 0;
-	dev->header_ops		= &dlci_header_ops;
-	dev->netdev_ops		= &dlci_netdev_ops;
-	dev->needs_free_netdev	= true;
-
-	dlp->receive		= dlci_receive;
-
-	dev->type		= ARPHRD_DLCI;
-	dev->hard_header_len	= sizeof(struct frhdr);
-	dev->addr_len		= sizeof(short);
-
-}
-
-/* if slave is unregistering, then cleanup master */
-static int dlci_dev_event(struct notifier_block *unused,
-			  unsigned long event, void *ptr)
-{
-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-
-	if (dev_net(dev) != &init_net)
-		return NOTIFY_DONE;
-
-	if (event == NETDEV_UNREGISTER) {
-		struct dlci_local *dlp;
-
-		list_for_each_entry(dlp, &dlci_devs, list) {
-			if (dlp->slave == dev) {
-				list_del(&dlp->list);
-				unregister_netdevice(dlp->master);
-				dev_put(dlp->slave);
-				break;
-			}
-		}
-	}
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block dlci_notifier = {
-	.notifier_call = dlci_dev_event,
-};
-
-static int __init init_dlci(void)
-{
-	dlci_ioctl_set(dlci_ioctl);
-	register_netdevice_notifier(&dlci_notifier);
-
-	printk("%s.\n", version);
-
-	return 0;
-}
-
-static void __exit dlci_exit(void)
-{
-	struct dlci_local	*dlp, *nxt;
-	
-	dlci_ioctl_set(NULL);
-	unregister_netdevice_notifier(&dlci_notifier);
-
-	rtnl_lock();
-	list_for_each_entry_safe(dlp, nxt, &dlci_devs, list) {
-		unregister_netdevice(dlp->master);
-		dev_put(dlp->slave);
-	}
-	rtnl_unlock();
-}
-
-module_init(init_dlci);
-module_exit(dlci_exit);
-
-MODULE_AUTHOR("Mike McLagan");
-MODULE_DESCRIPTION("Frame Relay DLCI layer");
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
deleted file mode 100644
index e2e679a01b65..000000000000
--- a/drivers/net/wan/sdla.c
+++ /dev/null
@@ -1,1655 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SDLA		An implementation of a driver for the Sangoma S502/S508 series
- *		multi-protocol PC interface card.  Initial offering is with 
- *		the DLCI driver, providing Frame Relay support for linux.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)sdla.c   0.30	12 Sep 1996
- *
- * Credits:	Sangoma Technologies, for the use of 2 cards for an extended
- *			period of time.
- *		David Mandelstam <dm at sangoma.com> for getting me started on 
- *			this project, and incentive to complete it.
- *		Gene Kozen <74604.152 at compuserve.com> for providing me with
- *			important information about the cards.
- *
- * Author:	Mike McLagan <mike.mclagan at linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Improved error handling, packet dropping
- *		0.20	Mike McLagan	New transmit/receive flags for config
- *					If in FR mode, don't accept packets from
- *					non DLCI devices.
- *		0.25	Mike McLagan	Fixed problem with rejecting packets
- *					from non DLCI devices.
- *		0.30	Mike McLagan	Fixed kernel panic when used with modified
- *					ifconfig
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_frad.h>
-#include <linux/sdla.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-
-static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan at linux.org";
-
-static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390};
-
-static unsigned int valid_mem[] = {
-				    0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000, 
-                                    0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000,
-                                    0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
-                                    0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000,
-                                    0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000}; 
-
-static DEFINE_SPINLOCK(sdla_lock);
-
-/*********************************************************
- *
- * these are the core routines that access the card itself 
- *
- *********************************************************/
-
-#define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW)
-
-static void __sdla_read(struct net_device *dev, int addr, void *buf, short len)
-{
-	char          *temp;
-	const void    *base;
-	int           offset, bytes;
-
-	temp = buf;
-	while(len)
-	{	
-		offset = addr & SDLA_ADDR_MASK;
-		bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
-		base = (const void *) (dev->mem_start + offset);
-
-		SDLA_WINDOW(dev, addr);
-		memcpy(temp, base, bytes);
-
-		addr += bytes;
-		temp += bytes;
-		len  -= bytes;
-	}  
-}
-
-static void sdla_read(struct net_device *dev, int addr, void *buf, short len)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&sdla_lock, flags);
-	__sdla_read(dev, addr, buf, len);
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-static void __sdla_write(struct net_device *dev, int addr, 
-			 const void *buf, short len)
-{
-	const char    *temp;
-	void 	      *base;
-	int           offset, bytes;
-
-	temp = buf;
-	while(len)
-	{
-		offset = addr & SDLA_ADDR_MASK;
-		bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
-		base = (void *) (dev->mem_start + offset);
-
-		SDLA_WINDOW(dev, addr);
-		memcpy(base, temp, bytes);
-
-		addr += bytes;
-		temp += bytes;
-		len  -= bytes;
-	}
-}
-
-static void sdla_write(struct net_device *dev, int addr, 
-		       const void *buf, short len)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	__sdla_write(dev, addr, buf, len);
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-
-static void sdla_clear(struct net_device *dev)
-{
-	unsigned long flags;
-	char          *base;
-	int           len, addr, bytes;
-
-	len = 65536;	
-	addr = 0;
-	bytes = SDLA_WINDOW_SIZE;
-	base = (void *) dev->mem_start;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	while(len)
-	{
-		SDLA_WINDOW(dev, addr);
-		memset(base, 0, bytes);
-
-		addr += bytes;
-		len  -= bytes;
-	}
-	spin_unlock_irqrestore(&sdla_lock, flags);
-
-}
-
-static char sdla_byte(struct net_device *dev, int addr)
-{
-	unsigned long flags;
-	char          byte, *temp;
-
-	temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK));
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	SDLA_WINDOW(dev, addr);
-	byte = *temp;
-	spin_unlock_irqrestore(&sdla_lock, flags);
-
-	return byte;
-}
-
-static void sdla_stop(struct net_device *dev)
-{
-	struct frad_local *flp;
-
-	flp = netdev_priv(dev);
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_HALT;
-			break;
-		case SDLA_S502E:
-			outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL);
-			outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_S502E_ENABLE;
-			break;
-		case SDLA_S507:
-			flp->state &= ~SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-		case SDLA_S508:
-			flp->state &= ~SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-}
-
-static void sdla_start(struct net_device *dev)
-{
-	struct frad_local *flp;
-
-	flp = netdev_priv(dev);
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL);
-			outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_S502A_START;
-			break;
-		case SDLA_S502E:
-			outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL);
-			outb(0x00, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = 0;
-			break;
-		case SDLA_S507:
-			flp->state |= SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-		case SDLA_S508:
-			flp->state |= SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-}
-
-/****************************************************
- *
- * this is used for the S502A/E cards to determine
- * the speed of the onboard CPU.  Calibration is
- * necessary for the Frame Relay code uploaded 
- * later.  Incorrect results cause timing problems
- * with link checks & status messages
- *
- ***************************************************/
-
-static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
-{
-	unsigned long start, done, now;
-	char          resp, *temp;
-
-	start = now = jiffies;
-	done = jiffies + jiffs;
-
-	temp = (void *)dev->mem_start;
-	temp += z80_addr & SDLA_ADDR_MASK;
-	
-	resp = ~resp1;
-	while (time_before(jiffies, done) && (resp != resp1) && (!resp2 || (resp != resp2)))
-	{
-		if (jiffies != now)
-		{
-			SDLA_WINDOW(dev, z80_addr);
-			now = jiffies;
-			resp = *temp;
-		}
-	}
-	return time_before(jiffies, done) ? jiffies - start : -1;
-}
-
-/* constants for Z80 CPU speed */
-#define Z80_READY 		'1'	/* Z80 is ready to begin */
-#define LOADER_READY 		'2'	/* driver is ready to begin */
-#define Z80_SCC_OK 		'3'	/* SCC is on board */
-#define Z80_SCC_BAD	 	'4'	/* SCC was not found */
-
-static int sdla_cpuspeed(struct net_device *dev, struct ifreq *ifr)
-{
-	int  jiffs;
-	char data;
-
-	sdla_start(dev);
-	if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0)
-		return -EIO;
-
-	data = LOADER_READY;
-	sdla_write(dev, 0, &data, 1);
-
-	if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0)
-		return -EIO;
-
-	sdla_stop(dev);
-	sdla_read(dev, 0, &data, 1);
-
-	if (data == Z80_SCC_BAD)
-	{
-		printk("%s: SCC bad\n", dev->name);
-		return -EIO;
-	}
-
-	if (data != Z80_SCC_OK)
-		return -EINVAL;
-
-	if (jiffs < 165)
-		ifr->ifr_mtu = SDLA_CPU_16M;
-	else if (jiffs < 220)
-		ifr->ifr_mtu = SDLA_CPU_10M;
-	else if (jiffs < 258)
-		ifr->ifr_mtu = SDLA_CPU_8M;
-	else if (jiffs < 357)
-		ifr->ifr_mtu = SDLA_CPU_7M;
-	else if (jiffs < 467)
-		ifr->ifr_mtu = SDLA_CPU_5M;
-	else
-		ifr->ifr_mtu = SDLA_CPU_3M;
- 
-	return 0;
-}
-
-/************************************************
- *
- *  Direct interaction with the Frame Relay code 
- *  starts here.
- *
- ************************************************/
-
-struct _dlci_stat 
-{
-	short dlci;
-	char  flags;
-} __packed;
-
-struct _frad_stat 
-{
-	char    flags;
-	struct _dlci_stat dlcis[SDLA_MAX_DLCI];
-};
-
-static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int len, void *data) 
-{
-	struct _dlci_stat *pstatus;
-	short             *pdlci;
-	int               i;
-	char              *state, line[30];
-
-	switch (ret)
-	{
-		case SDLA_RET_MODEM:
-			state = data;
-			if (*state & SDLA_MODEM_DCD_LOW)
-				netdev_info(dev, "Modem DCD unexpectedly low!\n");
-			if (*state & SDLA_MODEM_CTS_LOW)
-				netdev_info(dev, "Modem CTS unexpectedly low!\n");
-			/* I should probably do something about this! */
-			break;
-
-		case SDLA_RET_CHANNEL_OFF:
-			netdev_info(dev, "Channel became inoperative!\n");
-			/* same here */
-			break;
-
-		case SDLA_RET_CHANNEL_ON:
-			netdev_info(dev, "Channel became operative!\n");
-			/* same here */
-			break;
-
-		case SDLA_RET_DLCI_STATUS:
-			netdev_info(dev, "Status change reported by Access Node\n");
-			len /= sizeof(struct _dlci_stat);
-			for(pstatus = data, i=0;i < len;i++,pstatus++)
-			{
-				if (pstatus->flags & SDLA_DLCI_NEW)
-					state = "new";
-				else if (pstatus->flags & SDLA_DLCI_DELETED)
-					state = "deleted";
-				else if (pstatus->flags & SDLA_DLCI_ACTIVE)
-					state = "active";
-				else
-				{
-					sprintf(line, "unknown status: %02X", pstatus->flags);
-					state = line;
-				}
-				netdev_info(dev, "DLCI %i: %s\n",
-					    pstatus->dlci, state);
-				/* same here */
-			}
-			break;
-
-		case SDLA_RET_DLCI_UNKNOWN:
-			netdev_info(dev, "Received unknown DLCIs:");
-			len /= sizeof(short);
-			for(pdlci = data,i=0;i < len;i++,pdlci++)
-				pr_cont(" %i", *pdlci);
-			pr_cont("\n");
-			break;
-
-		case SDLA_RET_TIMEOUT:
-			netdev_err(dev, "Command timed out!\n");
-			break;
-
-		case SDLA_RET_BUF_OVERSIZE:
-			netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n",
-				    len);
-			break;
-
-		case SDLA_RET_BUF_TOO_BIG:
-			netdev_info(dev, "Buffer size over specified max of %i\n",
-				    len);
-			break;
-
-		case SDLA_RET_CHANNEL_INACTIVE:
-		case SDLA_RET_DLCI_INACTIVE:
-		case SDLA_RET_CIR_OVERFLOW:
-		case SDLA_RET_NO_BUFS:
-			if (cmd == SDLA_INFORMATION_WRITE)
-				break;
-			/* Else, fall through */
-
-		default: 
-			netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n",
-				   cmd, ret);
-			/* Further processing could be done here */
-			break;
-	}
-}
-
-static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags, 
-                        void *inbuf, short inlen, void *outbuf, short *outlen)
-{
-	static struct _frad_stat status;
-	struct frad_local        *flp;
-	struct sdla_cmd          *cmd_buf;
-	unsigned long            pflags;
-	unsigned long		 jiffs;
-	int                      ret, waiting, len;
-	long                     window;
-
-	flp = netdev_priv(dev);
-	window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF;
-	cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK));
-	ret = 0;
-	len = 0;
-	jiffs = jiffies + HZ;  /* 1 second is plenty */
-
-	spin_lock_irqsave(&sdla_lock, pflags);
-	SDLA_WINDOW(dev, window);
-	cmd_buf->cmd = cmd;
-	cmd_buf->dlci = dlci;
-	cmd_buf->flags = flags;
-
-	if (inbuf)
-		memcpy(cmd_buf->data, inbuf, inlen);
-
-	cmd_buf->length = inlen;
-
-	cmd_buf->opp_flag = 1;
-	spin_unlock_irqrestore(&sdla_lock, pflags);
-
-	waiting = 1;
-	len = 0;
-	while (waiting && time_before_eq(jiffies, jiffs))
-	{
-		if (waiting++ % 3) 
-		{
-			spin_lock_irqsave(&sdla_lock, pflags);
-			SDLA_WINDOW(dev, window);
-			waiting = ((volatile int)(cmd_buf->opp_flag));
-			spin_unlock_irqrestore(&sdla_lock, pflags);
-		}
-	}
-	
-	if (!waiting)
-	{
-
-		spin_lock_irqsave(&sdla_lock, pflags);
-		SDLA_WINDOW(dev, window);
-		ret = cmd_buf->retval;
-		len = cmd_buf->length;
-		if (outbuf && outlen)
-		{
-			*outlen = *outlen >= len ? len : *outlen;
-
-			if (*outlen)
-				memcpy(outbuf, cmd_buf->data, *outlen);
-		}
-
-		/* This is a local copy that's used for error handling */
-		if (ret)
-			memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len);
-
-		spin_unlock_irqrestore(&sdla_lock, pflags);
-	}
-	else
-		ret = SDLA_RET_TIMEOUT;
-
-	if (ret != SDLA_RET_OK)
-	   	sdla_errors(dev, cmd, dlci, ret, len, &status);
-
-	return ret;
-}
-
-/***********************************************
- *
- * these functions are called by the DLCI driver 
- *
- ***********************************************/
-
-static int sdla_reconfig(struct net_device *dev);
-
-static int sdla_activate(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->dlci[i] = abs(flp->dlci[i]);
-
-	if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
-		sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_deactivate(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->dlci[i] = -abs(flp->dlci[i]);
-
-	if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
-		sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_assoc(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	if (master->type != ARPHRD_DLCI)
-		return -EINVAL;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-	{
-		if (!flp->master[i])
-			break;
-		if (abs(flp->dlci[i]) == *(short *)(master->dev_addr))
-			return -EADDRINUSE;
-	} 
-
-	if (i == CONFIG_DLCI_MAX)
-		return -EMLINK;  /* #### Alan: Comments on this ?? */
-
-
-	flp->master[i] = master;
-	flp->dlci[i] = -*(short *)(master->dev_addr);
-	master->mtu = slave->mtu;
-
-	if (netif_running(slave)) {
-		if (flp->config.station == FRAD_STATION_CPE)
-			sdla_reconfig(slave);
-		else
-			sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
-	}
-
-	return 0;
-}
-
-static int sdla_deassoc(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->master[i] = NULL;
-	flp->dlci[i] = 0;
-
-
-	if (netif_running(slave)) {
-		if (flp->config.station == FRAD_STATION_CPE)
-			sdla_reconfig(slave);
-		else
-			sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
-	}
-
-	return 0;
-}
-
-static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
-{
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	int               i;
-	short             len, ret;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	dlp = netdev_priv(master);
-
-	ret = SDLA_RET_OK;
-	len = sizeof(struct dlci_conf);
-	if (netif_running(slave)) {
-		if (get)
-			ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,  
-			            NULL, 0, &dlp->config, &len);
-		else
-			ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,  
-			            &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL);
-	}
-
-	return ret == SDLA_RET_OK ? 0 : -EIO;
-}
-
-/**************************
- *
- * now for the Linux driver 
- *
- **************************/
-
-/* NOTE: the DLCI driver deals with freeing the SKB!! */
-static netdev_tx_t sdla_transmit(struct sk_buff *skb,
-				 struct net_device *dev)
-{
-	struct frad_local *flp;
-	int               ret, addr, accept, i;
-	short             size;
-	unsigned long     flags;
-	struct buf_entry  *pbuf;
-
-	flp = netdev_priv(dev);
-	ret = 0;
-	accept = 1;
-
-	netif_stop_queue(dev);
-
-	/*
-	 * stupid GateD insists on setting up the multicast router thru us
-	 * and we're ill equipped to handle a non Frame Relay packet at this
-	 * time!
-	 */
-
-	accept = 1;
-	switch (dev->type)
-	{
-		case ARPHRD_FRAD:
-			if (skb->dev->type != ARPHRD_DLCI)
-			{
-				netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n",
-					    skb->dev->type);
-				accept = 0;
-			}
-			break;
-		default:
-			netdev_warn(dev, "unknown firmware type 0x%04X\n",
-				    dev->type);
-			accept = 0;
-			break;
-	}
-	if (accept)
-	{
-		/* this is frame specific, but till there's a PPP module, it's the default */
-		switch (flp->type)
-		{
-			case SDLA_S502A:
-			case SDLA_S502E:
-				ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL);
-				break;
-				case SDLA_S508:
-				size = sizeof(addr);
-				ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size);
-				if (ret == SDLA_RET_OK)
-				{
-
-					spin_lock_irqsave(&sdla_lock, flags);
-					SDLA_WINDOW(dev, addr);
-					pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
-					__sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
-					SDLA_WINDOW(dev, addr);
-					pbuf->opp_flag = 1;
-					spin_unlock_irqrestore(&sdla_lock, flags);
-				}
-				break;
-		}
-
-		switch (ret)
-		{
-			case SDLA_RET_OK:
-				dev->stats.tx_packets++;
-				break;
-
-			case SDLA_RET_CIR_OVERFLOW:
-			case SDLA_RET_BUF_OVERSIZE:
-			case SDLA_RET_NO_BUFS:
-				dev->stats.tx_dropped++;
-				break;
-
-			default:
-				dev->stats.tx_errors++;
-				break;
-		}
-	}
-	netif_wake_queue(dev);
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-	{
-		if(flp->master[i]!=NULL)
-			netif_wake_queue(flp->master[i]);
-	}		
-
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static void sdla_receive(struct net_device *dev)
-{
-	struct net_device	  *master;
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	struct sk_buff	 *skb;
-
-	struct sdla_cmd	*cmd;
-	struct buf_info	*pbufi;
-	struct buf_entry  *pbuf;
-
-	unsigned long	  flags;
-	int               i=0, received, success, addr, buf_base, buf_top;
-	short             dlci, len, len2, split;
-
-	flp = netdev_priv(dev);
-	success = 1;
-	received = addr = buf_top = buf_base = 0;
-	len = dlci = 0;
-	skb = NULL;
-	master = NULL;
-	cmd = NULL;
-	pbufi = NULL;
-	pbuf = NULL;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-
-	switch (flp->type)
-	{
-		case SDLA_S502A:
-		case SDLA_S502E:
-			cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK));
-			SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
-			success = cmd->opp_flag;
-			if (!success)
-				break;
-
-			dlci = cmd->dlci;
-			len = cmd->length;
-			break;
-
-		case SDLA_S508:
-			pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK));
-			SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
-			pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK));
-			success = pbuf->opp_flag;
-			if (!success)
-				break;
-
-			buf_top = pbufi->buf_top;
-			buf_base = pbufi->buf_base;
-			dlci = pbuf->dlci;
-			len = pbuf->length;
-			addr = pbuf->buf_addr;
-			break;
-	}
-
-	/* common code, find the DLCI and get the SKB */
-	if (success)
-	{
-		for (i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] == dlci)
-				break;
-
-		if (i == CONFIG_DLCI_MAX)
-		{
-			netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n",
-				      dlci);
-			dev->stats.rx_errors++;
-			success = 0;
-		}
-	}
-
-	if (success)
-	{
-		master = flp->master[i];
-		skb = dev_alloc_skb(len + sizeof(struct frhdr));
-		if (skb == NULL) 
-		{
-			netdev_notice(dev, "Memory squeeze, dropping packet\n");
-			dev->stats.rx_dropped++;
-			success = 0;
-		}
-		else
-			skb_reserve(skb, sizeof(struct frhdr));
-	}
-
-	/* pick up the data */
-	switch (flp->type)
-	{
-		case SDLA_S502A:
-		case SDLA_S502E:
-			if (success)
-				__sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len);
-
-			SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
-			cmd->opp_flag = 0;
-			break;
-
-		case SDLA_S508:
-			if (success)
-			{
-				/* is this buffer split off the end of the internal ring buffer */
-				split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0;
-				len2 = len - split;
-
-				__sdla_read(dev, addr, skb_put(skb, len2), len2);
-				if (split)
-					__sdla_read(dev, buf_base, skb_put(skb, split), split);
-			}
-
-			/* increment the buffer we're looking at */
-			SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
-			flp->buffer = (flp->buffer + 1) % pbufi->rse_num;
-			pbuf->opp_flag = 0;
-			break;
-	}
-
-	if (success)
-	{
-		dev->stats.rx_packets++;
-		dlp = netdev_priv(master);
-		(*dlp->receive)(skb, master);
-	}
-
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-static irqreturn_t sdla_isr(int dummy, void *dev_id)
-{
-	struct net_device     *dev;
-	struct frad_local *flp;
-	char              byte;
-
-	dev = dev_id;
-
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-	{
-		netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq);
-		return IRQ_NONE;
-	}
-
-	byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE);
-	switch (byte)
-	{
-		case SDLA_INTR_RX:
-			sdla_receive(dev);
-			break;
-
-		/* the command will get an error return, which is processed above */
-		case SDLA_INTR_MODEM:
-		case SDLA_INTR_STATUS:
-			sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL);
-			break;
-
-		case SDLA_INTR_TX:
-		case SDLA_INTR_COMPLETE:
-		case SDLA_INTR_TIMER:
-			netdev_warn(dev, "invalid irq flag 0x%02X\n", byte);
-			break;
-	}
-
-	/* the S502E requires a manual acknowledgement of the interrupt */ 
-	if (flp->type == SDLA_S502E)
-	{
-		flp->state &= ~SDLA_S502E_INTACK;
-		outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-		flp->state |= SDLA_S502E_INTACK;
-		outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-	}
-
-	/* this clears the byte, informing the Z80 we're done */
-	byte = 0;
-	sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
-	return IRQ_HANDLED;
-}
-
-static void sdla_poll(struct timer_list *t)
-{
-	struct frad_local *flp = from_timer(flp, t, timer);
-	struct net_device *dev = flp->dev;
-
-	if (sdla_byte(dev, SDLA_502_RCV_BUF))
-		sdla_receive(dev);
-
-	flp->timer.expires = 1;
-	add_timer(&flp->timer);
-}
-
-static int sdla_close(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct intr_info  intr;
-	int               len, i;
-	short             dlcis[CONFIG_DLCI_MAX];
-
-	flp = netdev_priv(dev);
-
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			dlcis[len++] = abs(flp->dlci[i]);
-	len *= 2;
-
-	if (flp->config.station == FRAD_STATION_NODE)
-	{
-		for(i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] > 0) 
-				sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL);
-		sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL);
-	}
-
-	memset(&intr, 0, sizeof(intr));
-	/* let's start up the reception */
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			del_timer(&flp->timer); 
-			break;
-
-		case SDLA_S502E:
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
-			flp->state &= ~SDLA_S502E_INTACK;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-
-		case SDLA_S507:
-			break;
-
-		case SDLA_S508:
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
-			flp->state &= ~SDLA_S508_INTEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	netif_stop_queue(dev);
-	
-	return 0;
-}
-
-struct conf_data {
-	struct frad_conf config;
-	short            dlci[CONFIG_DLCI_MAX];
-};
-
-static int sdla_open(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	struct conf_data  data;
-	struct intr_info  intr;
-	int               len, i;
-	char              byte;
-
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-		return -EPERM;
-
-	if (!flp->configured)
-		return -EPERM;
-
-	/* time to send in the configuration */
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			data.dlci[len++] = abs(flp->dlci[i]);
-	len *= 2;
-
-	memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
-	len += sizeof(struct frad_conf);
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-	sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
-
-	if (flp->type == SDLA_S508)
-		flp->buffer = 0;
-
-	sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	/* let's start up the reception */
-	memset(&intr, 0, sizeof(intr));
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			flp->timer.expires = 1;
-			add_timer(&flp->timer);
-			break;
-
-		case SDLA_S502E:
-			flp->state |= SDLA_S502E_ENABLE;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state |= SDLA_S502E_INTACK;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			byte = 0;
-			sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
-			intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
-			break;
-
-		case SDLA_S507:
-			break;
-
-		case SDLA_S508:
-			flp->state |= SDLA_S508_INTEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			byte = 0;
-			sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte));
-			intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
-			intr.irq = dev->irq;
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
-			break;
-	}
-
-	if (flp->config.station == FRAD_STATION_CPE)
-	{
-		byte = SDLA_ICS_STATUS_ENQ;
-		sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL);
-	}
-	else
-	{
-		sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL);
-		for(i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] > 0)
-				sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL);
-	}
-
-	/* configure any specific DLCI settings */
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-		{
-			dlp = netdev_priv(flp->master[i]);
-			if (dlp->configured)
-				sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL);
-		}
-
-	netif_start_queue(dev);
-	
-	return 0;
-}
-
-static int sdla_config(struct net_device *dev, struct frad_conf __user *conf, int get)
-{
-	struct frad_local *flp;
-	struct conf_data  data;
-	int               i;
-	short             size;
-
-	if (dev->type == 0xFFFF)
-		return -EUNATCH;
-
-	flp = netdev_priv(dev);
-
-	if (!get)
-	{
-		if (netif_running(dev))
-			return -EBUSY;
-
-		if(copy_from_user(&data.config, conf, sizeof(struct frad_conf)))
-			return -EFAULT;
-
-		if (data.config.station & ~FRAD_STATION_NODE)
-			return -EINVAL;
-
-		if (data.config.flags & ~FRAD_VALID_FLAGS)
-			return -EINVAL;
-
-		if ((data.config.kbaud < 0) || 
-			 ((data.config.kbaud > 128) && (flp->type != SDLA_S508)))
-			return -EINVAL;
-
-		if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232))
-			return -EINVAL;
-
-		if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU))
-			return -EINVAL;
-
-		if ((data.config.T391 < 5) || (data.config.T391 > 30))
-			return -EINVAL;
-
-		if ((data.config.T392 < 5) || (data.config.T392 > 30))
-			return -EINVAL;
-
-		if ((data.config.N391 < 1) || (data.config.N391 > 255))
-			return -EINVAL;
-
-		if ((data.config.N392 < 1) || (data.config.N392 > 10))
-			return -EINVAL;
-
-		if ((data.config.N393 < 1) || (data.config.N393 > 10))
-			return -EINVAL;
-
-		memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
-		flp->config.flags |= SDLA_DIRECT_RECV;
-
-		if (flp->type == SDLA_S508)
-			flp->config.flags |= SDLA_TX70_RX30;
-
-		if (dev->mtu != flp->config.mtu)
-		{
-			/* this is required to change the MTU */
-			dev->mtu = flp->config.mtu;
-			for(i=0;i<CONFIG_DLCI_MAX;i++)
-				if (flp->master[i])
-					flp->master[i]->mtu = flp->config.mtu;
-		}
-
-		flp->config.mtu += sizeof(struct frhdr);
-
-		/* off to the races! */
-		if (!flp->configured)
-			sdla_start(dev);
-
-		flp->configured = 1;
-	}
-	else
-	{
-		/* no sense reading if the CPU isn't started */
-		if (netif_running(dev))
-		{
-			size = sizeof(data);
-			if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK)
-				return -EIO;
-		}
-		else
-			if (flp->configured)
-				memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
-			else
-				memset(&data.config, 0, sizeof(struct frad_conf));
-
-		memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
-		data.config.flags &= FRAD_VALID_FLAGS;
-		data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu;
-		return copy_to_user(conf, &data.config, sizeof(struct frad_conf))?-EFAULT:0;
-	}
-
-	return 0;
-}
-
-static int sdla_xfer(struct net_device *dev, struct sdla_mem __user *info, int read)
-{
-	struct sdla_mem mem;
-	char	*temp;
-
-	if(copy_from_user(&mem, info, sizeof(mem)))
-		return -EFAULT;
-		
-	if (read)
-	{	
-		temp = kzalloc(mem.len, GFP_KERNEL);
-		if (!temp)
-			return -ENOMEM;
-		sdla_read(dev, mem.addr, temp, mem.len);
-		if(copy_to_user(mem.data, temp, mem.len))
-		{
-			kfree(temp);
-			return -EFAULT;
-		}
-		kfree(temp);
-	}
-	else
-	{
-		temp = memdup_user(mem.data, mem.len);
-		if (IS_ERR(temp))
-			return PTR_ERR(temp);
-		sdla_write(dev, mem.addr, temp, mem.len);
-		kfree(temp);
-	}
-	return 0;
-}
-
-static int sdla_reconfig(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct conf_data  data;
-	int               i, len;
-
-	flp = netdev_priv(dev);
-
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			data.dlci[len++] = flp->dlci[i];
-	len *= 2;
-
-	memcpy(&data, &flp->config, sizeof(struct frad_conf));
-	len += sizeof(struct frad_conf);
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-	sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
-	sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct frad_local *flp;
-
-	if(!capable(CAP_NET_ADMIN))
-		return -EPERM;
-		
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-		return -EINVAL;
-
-	switch (cmd)
-	{
-		case FRAD_GET_CONF:
-		case FRAD_SET_CONF:
-			return sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF);
-
-		case SDLA_IDENTIFY:
-			ifr->ifr_flags = flp->type;
-			break;
-
-		case SDLA_CPUSPEED:
-			return sdla_cpuspeed(dev, ifr);
-
-/* ==========================================================
-NOTE:  This is rather a useless action right now, as the
-       current driver does not support protocols other than
-       FR.  However, Sangoma has modules for a number of
-       other protocols in the works.
-============================================================*/
-		case SDLA_PROTOCOL:
-			if (flp->configured)
-				return -EALREADY;
-
-			switch (ifr->ifr_flags)
-			{
-				case ARPHRD_FRAD:
-					dev->type = ifr->ifr_flags;
-					break;
-				default:
-					return -ENOPROTOOPT;
-			}
-			break;
-
-		case SDLA_CLEARMEM:
-			sdla_clear(dev);
-			break;
-
-		case SDLA_WRITEMEM:
-		case SDLA_READMEM:
-			if(!capable(CAP_SYS_RAWIO))
-				return -EPERM;
-			return sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM);
-
-		case SDLA_START:
-			sdla_start(dev);
-			break;
-
-		case SDLA_STOP:
-			sdla_stop(dev);
-			break;
-
-		default:
-			return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int sdla_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if (netif_running(dev))
-		return -EBUSY;
-
-	/* for now, you can't change the MTU! */
-	return -EOPNOTSUPP;
-}
-
-static int sdla_set_config(struct net_device *dev, struct ifmap *map)
-{
-	struct frad_local *flp;
-	int               i;
-	char              byte;
-	unsigned base;
-	int err = -EINVAL;
-
-	flp = netdev_priv(dev);
-
-	if (flp->initialized)
-		return -EINVAL;
-
-	for(i=0; i < ARRAY_SIZE(valid_port); i++)
-		if (valid_port[i] == map->base_addr)
-			break;   
-
-	if (i == ARRAY_SIZE(valid_port))
-		return -EINVAL;
-
-	if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
-		pr_warn("io-port 0x%04lx in use\n", dev->base_addr);
-		return -EINVAL;
-	}
-	base = map->base_addr;
-
-	/* test for card types, S502A, S502E, S507, S508                 */
-	/* these tests shut down the card completely, so clear the state */
-	flp->type = SDLA_UNKNOWN;
-	flp->state = 0;
-   
-	for(i=1;i<SDLA_IO_EXTENTS;i++)
-		if (inb(base + i) != 0xFF)
-			break;
-
-	if (i == SDLA_IO_EXTENTS) {   
-		outb(SDLA_HALT, base + SDLA_REG_Z80_CONTROL);
-		if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x08) {
-			outb(SDLA_S502E_INTACK, base + SDLA_REG_CONTROL);
-			if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x0C) {
-				outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S502E;
-				goto got_type;
-			}
-		}
-	}
-
-	for(byte=inb(base),i=0;i<SDLA_IO_EXTENTS;i++)
-		if (inb(base + i) != byte)
-			break;
-
-	if (i == SDLA_IO_EXTENTS) {
-		outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-		if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x30) {
-			outb(SDLA_S507_ENABLE, base + SDLA_REG_CONTROL);
-			if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x32) {
-				outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S507;
-				goto got_type;
-			}
-		}
-	}
-
-	outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-	if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x00) {
-		outb(SDLA_S508_INTEN, base + SDLA_REG_CONTROL);
-		if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x10) {
-			outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-			flp->type = SDLA_S508;
-			goto got_type;
-		}
-	}
-
-	outb(SDLA_S502A_HALT, base + SDLA_REG_CONTROL);
-	if (inb(base + SDLA_S502_STS) == 0x40) {
-		outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
-		if (inb(base + SDLA_S502_STS) == 0x40) {
-			outb(SDLA_S502A_INTEN, base + SDLA_REG_CONTROL);
-			if (inb(base + SDLA_S502_STS) == 0x44) {
-				outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S502A;
-				goto got_type;
-			}
-		}
-	}
-
-	netdev_notice(dev, "Unknown card type\n");
-	err = -ENODEV;
-	goto fail;
-
-got_type:
-	switch(base) {
-		case 0x270:
-		case 0x280:
-		case 0x380: 
-		case 0x390:
-			if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
-				goto fail;
-	}
-
-	switch (map->irq) {
-		case 2:
-			if (flp->type != SDLA_S502E)
-				goto fail;
-			break;
-
-		case 10:
-		case 11:
-		case 12:
-		case 15:
-		case 4:
-			if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
-				goto fail;
-			break;
-		case 3:
-		case 5:
-		case 7:
-			if (flp->type == SDLA_S502A)
-				goto fail;
-			break;
-
-		default:
-			goto fail;
-	}
-
-	err = -EAGAIN;
-	if (request_irq(dev->irq, sdla_isr, 0, dev->name, dev)) 
-		goto fail;
-
-	if (flp->type == SDLA_S507) {
-		switch(dev->irq) {
-			case 3:
-				flp->state = SDLA_S507_IRQ3;
-				break;
-			case 4:
-				flp->state = SDLA_S507_IRQ4;
-				break;
-			case 5:
-				flp->state = SDLA_S507_IRQ5;
-				break;
-			case 7:
-				flp->state = SDLA_S507_IRQ7;
-				break;
-			case 10:
-				flp->state = SDLA_S507_IRQ10;
-				break;
-			case 11:
-				flp->state = SDLA_S507_IRQ11;
-				break;
-			case 12:
-				flp->state = SDLA_S507_IRQ12;
-				break;
-			case 15:
-				flp->state = SDLA_S507_IRQ15;
-				break;
-		}
-	}
-
-	for(i=0; i < ARRAY_SIZE(valid_mem); i++)
-		if (valid_mem[i] == map->mem_start)
-			break;   
-
-	err = -EINVAL;
-	if (i == ARRAY_SIZE(valid_mem))
-		goto fail2;
-
-	if (flp->type == SDLA_S502A && (map->mem_start & 0xF000) >> 12 == 0x0E)
-		goto fail2;
-
-	if (flp->type != SDLA_S507 && map->mem_start >> 16 == 0x0B)
-		goto fail2;
-
-	if (flp->type == SDLA_S507 && map->mem_start >> 16 == 0x0D)
-		goto fail2;
-
-	byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0;
-	byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0));
-	switch(flp->type) {
-		case SDLA_S502A:
-		case SDLA_S502E:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S502_SEG_A;
-					break;
-				case 0x0C:
-					byte |= SDLA_S502_SEG_C;
-					break;
-				case 0x0D:
-					byte |= SDLA_S502_SEG_D;
-					break;
-				case 0x0E:
-					byte |= SDLA_S502_SEG_E;
-					break;
-			}
-			break;
-		case SDLA_S507:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S507_SEG_A;
-					break;
-				case 0x0B:
-					byte |= SDLA_S507_SEG_B;
-					break;
-				case 0x0C:
-					byte |= SDLA_S507_SEG_C;
-					break;
-				case 0x0E:
-					byte |= SDLA_S507_SEG_E;
-					break;
-			}
-			break;
-		case SDLA_S508:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S508_SEG_A;
-					break;
-				case 0x0C:
-					byte |= SDLA_S508_SEG_C;
-					break;
-				case 0x0D:
-					byte |= SDLA_S508_SEG_D;
-					break;
-				case 0x0E:
-					byte |= SDLA_S508_SEG_E;
-					break;
-			}
-			break;
-	}
-
-	/* set the memory bits, and enable access */
-	outb(byte, base + SDLA_REG_PC_WINDOW);
-
-	switch(flp->type)
-	{
-		case SDLA_S502E:
-			flp->state = SDLA_S502E_ENABLE;
-			break;
-		case SDLA_S507:
-			flp->state |= SDLA_MEMEN;
-			break;
-		case SDLA_S508:
-			flp->state = SDLA_MEMEN;
-			break;
-	}
-	outb(flp->state, base + SDLA_REG_CONTROL);
-
-	dev->irq = map->irq;
-	dev->base_addr = base;
-	dev->mem_start = map->mem_start;
-	dev->mem_end = dev->mem_start + 0x2000;
-	flp->initialized = 1;
-	return 0;
-
-fail2:
-	free_irq(map->irq, dev);
-fail:
-	release_region(base, SDLA_IO_EXTENTS);
-	return err;
-}
- 
-static const struct net_device_ops sdla_netdev_ops = {
-	.ndo_open	= sdla_open,
-	.ndo_stop	= sdla_close,
-	.ndo_do_ioctl	= sdla_ioctl,
-	.ndo_set_config	= sdla_set_config,
-	.ndo_start_xmit	= sdla_transmit,
-	.ndo_change_mtu	= sdla_change_mtu,
-};
-
-static void setup_sdla(struct net_device *dev)
-{
-	struct frad_local *flp = netdev_priv(dev);
-
-	netdev_boot_setup_check(dev);
-
-	dev->netdev_ops		= &sdla_netdev_ops;
-	dev->flags		= 0;
-	dev->type		= 0xFFFF;
-	dev->hard_header_len	= 0;
-	dev->addr_len		= 0;
-	dev->mtu		= SDLA_MAX_MTU;
-
-	flp->activate		= sdla_activate;
-	flp->deactivate		= sdla_deactivate;
-	flp->assoc		= sdla_assoc;
-	flp->deassoc		= sdla_deassoc;
-	flp->dlci_conf		= sdla_dlci_conf;
-	flp->dev		= dev;
-
-	timer_setup(&flp->timer, sdla_poll, 0);
-	flp->timer.expires	= 1;
-}
-
-static struct net_device *sdla;
-
-static int __init init_sdla(void)
-{
-	int err;
-
-	printk("%s.\n", version);
-
-	sdla = alloc_netdev(sizeof(struct frad_local), "sdla0",
-			    NET_NAME_UNKNOWN, setup_sdla);
-	if (!sdla) 
-		return -ENOMEM;
-
-	err = register_netdev(sdla);
-	if (err) 
-		free_netdev(sdla);
-
-	return err;
-}
-
-static void __exit exit_sdla(void)
-{
-	struct frad_local *flp = netdev_priv(sdla);
-
-	unregister_netdev(sdla);
-	if (flp->initialized) {
-		free_irq(sdla->irq, sdla);
-		release_region(sdla->base_addr, SDLA_IO_EXTENTS);
-	}
-	del_timer_sync(&flp->timer);
-	free_netdev(sdla);
-}
-
-MODULE_LICENSE("GPL");
-
-module_init(init_sdla);
-module_exit(exit_sdla);
diff --git a/include/Kbuild b/include/Kbuild
index ffba79483cc5..64ab3aac7379 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -205,7 +205,6 @@ header-test-			+= linux/i3c/master.h
 header-test-			+= linux/i8042.h
 header-test-			+= linux/ide.h
 header-test-			+= linux/idle_inject.h
-header-test-			+= linux/if_frad.h
 header-test-			+= linux/if_rmnet.h
 header-test-			+= linux/if_tap.h
 header-test-			+= linux/iio/accel/kxcjk_1013.h
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
deleted file mode 100644
index 52224de798aa..000000000000
--- a/include/linux/if_frad.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan at linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- */
-#ifndef _FRAD_H_
-#define _FRAD_H_
-
-#include <uapi/linux/if_frad.h>
-
-
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
-/* these are the fields of an RFC 1490 header */
-struct frhdr
-{
-   unsigned char  control;
-
-   /* for IP packets, this can be the NLPID */
-   unsigned char  pad;
-
-   unsigned char  NLPID;
-   unsigned char  OUI[3];
-   __be16 PID;
-
-#define IP_NLPID pad 
-} __packed;
-
-/* see RFC 1490 for the definition of the following */
-#define FRAD_I_UI		0x03
-
-#define FRAD_P_PADDING		0x00
-#define FRAD_P_Q933		0x08
-#define FRAD_P_SNAP		0x80
-#define FRAD_P_CLNP		0x81
-#define FRAD_P_IP		0xCC
-
-struct dlci_local
-{
-   struct net_device      *master;
-   struct net_device      *slave;
-   struct dlci_conf       config;
-   int                    configured;
-   struct list_head	  list;
-
-   /* callback function */
-   void              (*receive)(struct sk_buff *skb, struct net_device *);
-};
-
-struct frad_local
-{
-   /* devices which this FRAD is slaved to */
-   struct net_device     *master[CONFIG_DLCI_MAX];
-   short             dlci[CONFIG_DLCI_MAX];
-
-   struct frad_conf  config;
-   int               configured;	/* has this device been configured */
-   int               initialized;	/* mem_start, port, irq set ? */
-
-   /* callback functions */
-   int               (*activate)(struct net_device *, struct net_device *);
-   int               (*deactivate)(struct net_device *, struct net_device *);
-   int               (*assoc)(struct net_device *, struct net_device *);
-   int               (*deassoc)(struct net_device *, struct net_device *);
-   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
-
-   /* fields that are used by the Sangoma SDLA cards */
-   struct timer_list timer;
-   struct net_device *dev;
-   int               type;		/* adapter type */
-   int               state;		/* state of the S502/8 control latch */
-   int               buffer;		/* current buffer for S508 firmware */
-};
-
-#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
-
-extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-
-#endif
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
deleted file mode 100644
index 00e8b3b614f0..000000000000
--- a/include/linux/sdla.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan at linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- */
-#ifndef SDLA_H
-#define SDLA_H
-
-#include <uapi/linux/sdla.h>
-
-
-/* important Z80 window addresses */
-#define SDLA_CONTROL_WND		0xE000
-
-#define SDLA_502_CMD_BUF		0xEF60
-#define SDLA_502_RCV_BUF		0xA900
-#define	SDLA_502_TXN_AVAIL		0xFFF1
-#define SDLA_502_RCV_AVAIL		0xFFF2
-#define SDLA_502_EVENT_FLAGS		0xFFF3
-#define SDLA_502_MDM_STATUS		0xFFF4
-#define SDLA_502_IRQ_INTERFACE		0xFFFD
-#define SDLA_502_IRQ_PERMISSION		0xFFFE
-#define SDLA_502_DATA_OFS		0x0010
-
-#define SDLA_508_CMD_BUF		0xE000
-#define SDLA_508_TXBUF_INFO		0xF100
-#define SDLA_508_RXBUF_INFO		0xF120
-#define SDLA_508_EVENT_FLAGS		0xF003
-#define SDLA_508_MDM_STATUS		0xF004
-#define SDLA_508_IRQ_INTERFACE		0xF010
-#define SDLA_508_IRQ_PERMISSION		0xF011
-#define SDLA_508_TSE_OFFSET		0xF012
-
-/* Event flags */
-#define SDLA_EVENT_STATUS		0x01
-#define SDLA_EVENT_DLCI_STATUS		0x02
-#define SDLA_EVENT_BAD_DLCI		0x04
-#define SDLA_EVENT_LINK_DOWN		0x40
-
-/* IRQ Trigger flags */
-#define SDLA_INTR_RX			0x01
-#define SDLA_INTR_TX			0x02
-#define SDLA_INTR_MODEM			0x04
-#define SDLA_INTR_COMPLETE		0x08
-#define SDLA_INTR_STATUS		0x10
-#define SDLA_INTR_TIMER			0x20
-
-/* DLCI status bits */
-#define SDLA_DLCI_DELETED		0x01
-#define SDLA_DLCI_ACTIVE		0x02
-#define SDLA_DLCI_WAITING		0x04
-#define SDLA_DLCI_NEW			0x08
-#define SDLA_DLCI_INCLUDED		0x40
-
-/* valid command codes */
-#define	SDLA_INFORMATION_WRITE		0x01
-#define	SDLA_INFORMATION_READ		0x02
-#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
-#define	SDLA_SET_DLCI_CONFIGURATION	0x10
-#define	SDLA_READ_DLCI_CONFIGURATION	0x11
-#define	SDLA_DISABLE_COMMUNICATIONS	0x12
-#define	SDLA_ENABLE_COMMUNICATIONS	0x13
-#define	SDLA_READ_DLC_STATUS		0x14
-#define	SDLA_READ_DLC_STATISTICS	0x15
-#define	SDLA_FLUSH_DLC_STATISTICS	0x16
-#define	SDLA_LIST_ACTIVE_DLCI		0x17
-#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
-#define	SDLA_ADD_DLCI			0x20
-#define	SDLA_DELETE_DLCI		0x21
-#define	SDLA_ACTIVATE_DLCI		0x22
-#define	SDLA_DEACTIVATE_DLCI		0x23
-#define	SDLA_READ_MODEM_STATUS		0x30
-#define	SDLA_SET_MODEM_STATUS		0x31
-#define	SDLA_READ_COMMS_ERR_STATS	0x32
-#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
-#define	SDLA_READ_CODE_VERSION		0x40
-#define SDLA_SET_IRQ_TRIGGER		0x50
-#define SDLA_GET_IRQ_TRIGGER		0x51
-
-/* In channel signal types */
-#define SDLA_ICS_LINK_VERIFY		0x02
-#define SDLA_ICS_STATUS_ENQ		0x03
-
-/* modem status flags */
-#define SDLA_MODEM_DTR_HIGH		0x01
-#define SDLA_MODEM_RTS_HIGH		0x02
-#define SDLA_MODEM_DCD_HIGH		0x08
-#define SDLA_MODEM_CTS_HIGH		0x20
-
-/* used for RET_MODEM interpretation */
-#define SDLA_MODEM_DCD_LOW		0x01
-#define SDLA_MODEM_CTS_LOW		0x02
-
-/* return codes */
-#define SDLA_RET_OK			0x00
-#define SDLA_RET_COMMUNICATIONS		0x01
-#define SDLA_RET_CHANNEL_INACTIVE	0x02
-#define SDLA_RET_DLCI_INACTIVE		0x03
-#define SDLA_RET_DLCI_CONFIG		0x04
-#define SDLA_RET_BUF_TOO_BIG		0x05
-#define SDLA_RET_NO_DATA		0x05
-#define SDLA_RET_BUF_OVERSIZE		0x06
-#define SDLA_RET_CIR_OVERFLOW		0x07
-#define SDLA_RET_NO_BUFS		0x08
-#define SDLA_RET_TIMEOUT		0x0A
-#define SDLA_RET_MODEM			0x10
-#define SDLA_RET_CHANNEL_OFF		0x11
-#define SDLA_RET_CHANNEL_ON		0x12
-#define SDLA_RET_DLCI_STATUS		0x13
-#define SDLA_RET_DLCI_UNKNOWN       	0x14
-#define SDLA_RET_COMMAND_INVALID    	0x1F
-
-/* Configuration flags */
-#define SDLA_DIRECT_RECV		0x0080
-#define SDLA_TX_NO_EXCEPT		0x0020
-#define SDLA_NO_ICF_MSGS		0x1000
-#define SDLA_TX50_RX50			0x0000
-#define SDLA_TX70_RX30			0x2000
-#define SDLA_TX30_RX70			0x4000
-
-/* IRQ selection flags */
-#define SDLA_IRQ_RECEIVE		0x01
-#define SDLA_IRQ_TRANSMIT		0x02
-#define SDLA_IRQ_MODEM_STAT		0x04
-#define SDLA_IRQ_COMMAND		0x08
-#define SDLA_IRQ_CHANNEL		0x10
-#define SDLA_IRQ_TIMER			0x20
-
-/* definitions for PC memory mapping */
-#define SDLA_8K_WINDOW			0x01
-#define SDLA_S502_SEG_A			0x10
-#define SDLA_S502_SEG_C			0x20
-#define SDLA_S502_SEG_D			0x00
-#define SDLA_S502_SEG_E			0x30
-#define SDLA_S507_SEG_A			0x00
-#define SDLA_S507_SEG_B			0x40
-#define SDLA_S507_SEG_C			0x80
-#define SDLA_S507_SEG_E			0xC0
-#define SDLA_S508_SEG_A			0x00
-#define SDLA_S508_SEG_C			0x10
-#define SDLA_S508_SEG_D			0x08
-#define SDLA_S508_SEG_E			0x18
-
-/* SDLA adapter port constants */
-#define SDLA_IO_EXTENTS			0x04
-	
-#define SDLA_REG_CONTROL		0x00
-#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
-#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
-#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
-	
-#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
-#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
-#define SDLA_S508_STS			0x01	/* status reg for 508 */
-#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
-	
-/* control register flags */
-#define SDLA_S502A_START		0x00	/* start the CPU */
-#define SDLA_S502A_INTREQ		0x02
-#define SDLA_S502A_INTEN		0x04
-#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
-#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
-
-#define SDLA_S502E_CPUEN		0x01
-#define SDLA_S502E_ENABLE		0x02
-#define SDLA_S502E_INTACK		0x04
-	
-#define SDLA_S507_ENABLE		0x01
-#define SDLA_S507_IRQ3			0x00
-#define SDLA_S507_IRQ4			0x20
-#define SDLA_S507_IRQ5			0x40
-#define SDLA_S507_IRQ7			0x60
-#define SDLA_S507_IRQ10			0x80
-#define SDLA_S507_IRQ11			0xA0
-#define SDLA_S507_IRQ12			0xC0
-#define SDLA_S507_IRQ15			0xE0
-	
-#define SDLA_HALT			0x00
-#define SDLA_CPUEN			0x02
-#define SDLA_MEMEN			0x04
-#define SDLA_S507_EPROMWR		0x08
-#define SDLA_S507_EPROMCLK		0x10
-#define SDLA_S508_INTRQ			0x08
-#define SDLA_S508_INTEN			0x10
-
-struct sdla_cmd {
-   char  opp_flag;
-   char  cmd;
-   short length;
-   char  retval;
-   short dlci;
-   char  flags;
-   short rxlost_int;
-   long  rxlost_app;
-   char  reserve[2];
-   char  data[SDLA_MAX_DATA];	/* transfer data buffer */
-} __attribute__((packed));
-
-struct intr_info {
-   char  flags;
-   short txlen;
-   char  irq;
-   char  flags2;
-   short timeout;
-} __attribute__((packed));
-
-/* found in the 508's control window at RXBUF_INFO */
-struct buf_info {
-   unsigned short rse_num;
-   unsigned long  rse_base;
-   unsigned long  rse_next;
-   unsigned long  buf_base;
-   unsigned short reserved;
-   unsigned long  buf_top;
-} __attribute__((packed));
-
-/* structure pointed to by rse_base in RXBUF_INFO struct */
-struct buf_entry {
-   char  opp_flag;
-   short length;
-   short dlci;
-   char  flags;
-   short timestamp;
-   short reserved[2];
-   long  buf_addr;
-} __attribute__((packed));
-
-#endif
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
deleted file mode 100644
index 3c6ee85f6262..000000000000
--- a/include/uapi/linux/if_frad.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan at linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _UAPI_FRAD_H_
-#define _UAPI_FRAD_H_
-
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
-
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-
-#endif /* _UAPI_FRAD_H_ */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
deleted file mode 100644
index 1e3735be6511..000000000000
--- a/include/uapi/linux/sdla.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan at linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _UAPISDLA_H
-#define _UAPISDLA_H
-
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
-
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-
-#endif /* _UAPISDLA_H */
diff --git a/net/socket.c b/net/socket.c
index 250dda239a15..ac3ad20953c4 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -64,7 +64,6 @@
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
 #include <linux/if_bridge.h>
-#include <linux/if_frad.h>
 #include <linux/if_vlan.h>
 #include <linux/ptp_classify.h>
 #include <linux/init.h>
@@ -1019,17 +1018,6 @@ void vlan_ioctl_set(int (*hook) (struct net *, void __user *))
 }
 EXPORT_SYMBOL(vlan_ioctl_set);
 
-static DEFINE_MUTEX(dlci_ioctl_mutex);
-static int (*dlci_ioctl_hook) (unsigned int, void __user *);
-
-void dlci_ioctl_set(int (*hook) (unsigned int, void __user *))
-{
-	mutex_lock(&dlci_ioctl_mutex);
-	dlci_ioctl_hook = hook;
-	mutex_unlock(&dlci_ioctl_mutex);
-}
-EXPORT_SYMBOL(dlci_ioctl_set);
-
 static long sock_do_ioctl(struct net *net, struct socket *sock,
 			  unsigned int cmd, unsigned long arg)
 {
@@ -1148,17 +1136,6 @@ static long sock_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 				err = vlan_ioctl_hook(net, argp);
 			mutex_unlock(&vlan_ioctl_mutex);
 			break;
-		case SIOCADDDLCI:
-		case SIOCDELDLCI:
-			err = -ENOPKG;
-			if (!dlci_ioctl_hook)
-				request_module("dlci");
-
-			mutex_lock(&dlci_ioctl_mutex);
-			if (dlci_ioctl_hook)
-				err = dlci_ioctl_hook(cmd, argp);
-			mutex_unlock(&dlci_ioctl_mutex);
-			break;
 		case SIOCGSKNS:
 			err = -EPERM;
 			if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
@@ -3403,8 +3380,6 @@ static int compat_sock_ioctl_trans(struct file *file, struct socket *sock,
 	case SIOCBRDELBR:
 	case SIOCGIFVLAN:
 	case SIOCSIFVLAN:
-	case SIOCADDDLCI:
-	case SIOCDELDLCI:
 	case SIOCGSKNS:
 	case SIOCGSTAMP_NEW:
 	case SIOCGSTAMPNS_NEW:
-- 
2.20.0



More information about the devel mailing list