[PATCH v2 1/2] staging: wilc1000: Don't reset WILC CPU disgracefully

Adham.Abozaeid at microchip.com Adham.Abozaeid at microchip.com
Fri Aug 9 18:25:18 UTC 2019


From: Adham Abozaeid <adham.abozaeid at microchip.com>

Send abort request to WILC from wilc_wlan_stop instead of resetting the
CPU.
The abort request was being sent from wilc_wlan_cleanup after the CPU
was reset which wasn't the correct order. The abort request handler
in the chip will take care of resetting the CPU.

Signed-off-by: Adham Abozaeid <adham.abozaeid at microchip.com>
---
 drivers/staging/wilc1000/wilc_netdev.c |  4 +-
 drivers/staging/wilc1000/wilc_wlan.c   | 75 +++++++-------------------
 drivers/staging/wilc1000/wilc_wlan.h   |  5 +-
 3 files changed, 24 insertions(+), 60 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_netdev.c b/drivers/staging/wilc1000/wilc_netdev.c
index 57510400f243..cd11c35adcfe 100644
--- a/drivers/staging/wilc1000/wilc_netdev.c
+++ b/drivers/staging/wilc1000/wilc_netdev.c
@@ -475,7 +475,7 @@ static void wilc_wlan_deinitialize(struct net_device *dev)
 		wlan_deinitialize_threads(dev);
 		deinit_irq(dev);
 
-		wilc_wlan_stop(wl);
+		wilc_wlan_stop(wl, vif);
 		wilc_wlan_cleanup(dev);
 		wlan_deinit_locks(dev);
 
@@ -573,7 +573,7 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 		return 0;
 
 fail_fw_start:
-		wilc_wlan_stop(wl);
+		wilc_wlan_stop(wl, vif);
 
 fail_irq_enable:
 		if (!wl->dev_irq_num &&
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index d4ca6467485c..3d902b499a34 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -968,60 +968,42 @@ int wilc_wlan_start(struct wilc *wilc)
 	return (ret < 0) ? ret : 0;
 }
 
-int wilc_wlan_stop(struct wilc *wilc)
+int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif)
 {
 	u32 reg = 0;
 	int ret;
-	u8 timeout = 10;
 
 	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 
-	ret = wilc->hif_func->hif_read_reg(wilc, WILC_GLB_RESET_0, &reg);
+	ret = wilc->hif_func->hif_read_reg(wilc, WILC_GP_REG_0, &reg);
 	if (!ret) {
+		netdev_err(vif->ndev, "Error while reading reg\n");
 		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 		return ret;
 	}
 
-	reg &= ~BIT(10);
-	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GLB_RESET_0, reg);
+	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GP_REG_0,
+					(reg | WILC_ABORT_REQ_BIT));
 	if (!ret) {
+		netdev_err(vif->ndev, "Error while writing reg\n");
 		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 		return ret;
 	}
 
-	do {
-		ret = wilc->hif_func->hif_read_reg(wilc,
-						   WILC_GLB_RESET_0, &reg);
-		if (!ret) {
-			release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
-			return ret;
-		}
-
-		if ((reg & BIT(10))) {
-			reg &= ~BIT(10);
-			ret = wilc->hif_func->hif_write_reg(wilc,
-							    WILC_GLB_RESET_0,
-							    reg);
-			timeout--;
-		} else {
-			ret = wilc->hif_func->hif_read_reg(wilc,
-							   WILC_GLB_RESET_0,
-							   &reg);
-			if (!ret) {
-				release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
-				return ret;
-			}
-			break;
-		}
-
-	} while (timeout);
-	reg = (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(8) | BIT(9) | BIT(26) |
-	       BIT(29) | BIT(30) | BIT(31));
-
-	wilc->hif_func->hif_write_reg(wilc, WILC_GLB_RESET_0, reg);
-	reg = (u32)~BIT(10);
+	ret = wilc->hif_func->hif_read_reg(wilc, WILC_FW_HOST_COMM, &reg);
+	if (!ret) {
+		netdev_err(vif->ndev, "Error while reading reg\n");
+		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+		return ret;
+	}
+	reg = BIT(0);
 
-	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GLB_RESET_0, reg);
+	ret = wilc->hif_func->hif_write_reg(wilc, WILC_FW_HOST_COMM, reg);
+	if (!ret) {
+		netdev_err(vif->ndev, "Error while writing reg\n");
+		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+		return ret;
+	}
 
 	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 
@@ -1032,8 +1014,6 @@ void wilc_wlan_cleanup(struct net_device *dev)
 {
 	struct txq_entry_t *tqe;
 	struct rxq_entry_t *rqe;
-	u32 reg = 0;
-	int ret;
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
 
@@ -1058,23 +1038,6 @@ void wilc_wlan_cleanup(struct net_device *dev)
 	wilc->rx_buffer = NULL;
 	kfree(wilc->tx_buffer);
 	wilc->tx_buffer = NULL;
-
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
-
-	ret = wilc->hif_func->hif_read_reg(wilc, WILC_GP_REG_0, &reg);
-	if (!ret) {
-		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
-		return;
-	}
-
-	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GP_REG_0,
-					(reg | ABORT_INT));
-	if (!ret) {
-		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
-		return;
-	}
-
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 	wilc->hif_func->hif_deinit(NULL);
 }
 
diff --git a/drivers/staging/wilc1000/wilc_wlan.h b/drivers/staging/wilc1000/wilc_wlan.h
index 802f11807659..f566d040bb72 100644
--- a/drivers/staging/wilc1000/wilc_wlan.h
+++ b/drivers/staging/wilc1000/wilc_wlan.h
@@ -98,6 +98,7 @@
 #define WILC_VMM_TBL_RX_SHADOW_BASE	WILC_AHB_SHARE_MEM_BASE
 #define WILC_VMM_TBL_RX_SHADOW_SIZE	256
 
+#define WILC_FW_HOST_COMM		0x13c0
 #define WILC_GP_REG_0			0x149c
 #define WILC_GP_REG_1			0x14a0
 
@@ -129,7 +130,7 @@
 
 #define WILC_PLL_TO_SDIO	4
 #define WILC_PLL_TO_SPI		2
-#define ABORT_INT		BIT(31)
+#define WILC_ABORT_REQ_BIT		BIT(31)
 
 #define WILC_RX_BUFF_SIZE	(96 * 1024)
 #define WILC_TX_BUFF_SIZE	(64 * 1024)
@@ -280,7 +281,7 @@ struct wilc_vif;
 int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 				u32 buffer_size);
 int wilc_wlan_start(struct wilc *wilc);
-int wilc_wlan_stop(struct wilc *wilc);
+int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif);
 int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
 			      u32 buffer_size,
 			      void (*tx_complete_fn)(void *, int));
-- 
2.17.1



More information about the devel mailing list