[PATCH] staging: greybus: use help instead of ---help--- in Kconfig

Sat Apr 20 09:21:49 UTC 2019

From: Moses Christopher <moseschristopherb at gmail.com>

      - Resolve the following warning from the Kconfig,
        "WARNING: prefer 'help' over '---help---' for new help texts"

Signed-off-by: Moses Christopher <moseschristopherb at gmail.com>
---
 drivers/staging/greybus/Kconfig | 44 ++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/greybus/Kconfig b/drivers/staging/greybus/Kconfig
index b571e4e8060b..2f5061b565a6 100644
--- a/drivers/staging/greybus/Kconfig
+++ b/drivers/staging/greybus/Kconfig
@@ -1,7 +1,7 @@
 menuconfig GREYBUS
 	tristate "Greybus support"
 	depends on SYSFS
-	---help---
+	help
 	  This option enables the Greybus driver core.  Greybus is an
 	  hardware protocol that was designed to provide Unipro with a
 	  sane application layer.  It was originally designed for the
@@ -19,7 +19,7 @@ if GREYBUS
 config GREYBUS_ES2
 	tristate "Greybus ES3 USB host controller"
 	depends on USB
-	---help---
+	help
 	  Select this option if you have a Toshiba ES3 USB device that
 	  acts as a Greybus "host controller".  This device is a bridge
 	  from a USB device to a Unipro network.
@@ -30,7 +30,7 @@ config GREYBUS_ES2
 config GREYBUS_AUDIO
 	tristate "Greybus Audio Class driver"
 	depends on SOUND
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Audio Class specification.
 
@@ -39,7 +39,7 @@ config GREYBUS_AUDIO
 
 config GREYBUS_BOOTROM
 	tristate "Greybus Bootrom Class driver"
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Bootrom Class specification.
 
@@ -49,7 +49,7 @@ config GREYBUS_BOOTROM
 config GREYBUS_CAMERA
 	tristate "Greybus Camera Class driver"
 	depends on MEDIA_SUPPORT && LEDS_CLASS_FLASH && BROKEN
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Camera Class specification.
 
@@ -59,7 +59,7 @@ config GREYBUS_CAMERA
 config GREYBUS_FIRMWARE
 	tristate "Greybus Firmware Download Class driver"
 	depends on SPI
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Firmware Download Class specification.
 
@@ -69,7 +69,7 @@ config GREYBUS_FIRMWARE
 config GREYBUS_HID
 	tristate "Greybus HID Class driver"
 	depends on HID && INPUT
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus HID Class specification.
 
@@ -79,7 +79,7 @@ config GREYBUS_HID
 config GREYBUS_LIGHT
 	tristate "Greybus LED Class driver"
 	depends on LEDS_CLASS
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus LED Class specification.
 
@@ -88,7 +88,7 @@ config GREYBUS_LIGHT
 
 config GREYBUS_LOG
 	tristate "Greybus Debug Log Class driver"
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Debug Log Class specification.
 
@@ -97,7 +97,7 @@ config GREYBUS_LOG
 
 config GREYBUS_LOOPBACK
 	tristate "Greybus Loopback Class driver"
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Debug Log Class specification.
 
@@ -107,7 +107,7 @@ config GREYBUS_LOOPBACK
 config GREYBUS_POWER
 	tristate "Greybus Powersupply Class driver"
 	depends on POWER_SUPPLY
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Powersupply Class specification.
 
@@ -116,7 +116,7 @@ config GREYBUS_POWER
 
 config GREYBUS_RAW
 	tristate "Greybus Raw Class driver"
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Raw Class specification.
 
@@ -125,7 +125,7 @@ config GREYBUS_RAW
 
 config GREYBUS_VIBRATOR
 	tristate "Greybus Vibrator Motor Class driver"
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus Vibrator Motor Class specification.
 
@@ -134,7 +134,7 @@ config GREYBUS_VIBRATOR
 
 menuconfig GREYBUS_BRIDGED_PHY
 	tristate "Greybus Bridged PHY Class drivers"
-	---help---
+	help
 	  Select this option to pick from a variety of Greybus Bridged
 	  PHY class drivers.  These drivers emulate a number of
 	  different "traditional" busses by tunneling them over Greybus.
@@ -149,7 +149,7 @@ config GREYBUS_GPIO
 	tristate "Greybus GPIO Bridged PHY driver"
 	depends on GPIOLIB
 	select GPIOLIB_IRQCHIP
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus GPIO Bridged PHY Class specification.
 
@@ -159,7 +159,7 @@ config GREYBUS_GPIO
 config GREYBUS_I2C
 	tristate "Greybus I2C Bridged PHY driver"
 	depends on I2C
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus I2C Bridged PHY Class specification.
 
@@ -169,7 +169,7 @@ config GREYBUS_I2C
 config GREYBUS_PWM
 	tristate "Greybus PWM Bridged PHY driver"
 	depends on PWM
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus PWM Bridged PHY Class specification.
 
@@ -179,7 +179,7 @@ config GREYBUS_PWM
 config GREYBUS_SDIO
 	tristate "Greybus SDIO Bridged PHY driver"
 	depends on MMC
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus SDIO Bridged PHY Class specification.
 
@@ -189,7 +189,7 @@ config GREYBUS_SDIO
 config GREYBUS_SPI
 	tristate "Greybus SPI Bridged PHY driver"
 	depends on SPI
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus SPI Bridged PHY Class specification.
 
@@ -199,7 +199,7 @@ config GREYBUS_SPI
 config GREYBUS_UART
 	tristate "Greybus UART Bridged PHY driver"
 	depends on TTY
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus UART Bridged PHY Class specification.
 
@@ -209,7 +209,7 @@ config GREYBUS_UART
 config GREYBUS_USB
 	tristate "Greybus USB Host Bridged PHY driver"
 	depends on USB
-	---help---
+	help
 	  Select this option if you have a device that follows the
 	  Greybus USB Host Bridged PHY Class specification.
 
@@ -221,7 +221,7 @@ endif	# GREYBUS_BRIDGED_PHY
 config GREYBUS_ARCHE
 	tristate "Greybus Arche Platform driver"
 	depends on USB_HSIC_USB3613 || COMPILE_TEST
-	---help---
+	help
 	  Select this option if you have an Arche device.
 
 	  To compile this code as a module, chose M here: the module
-- 
2.11.0

