[PATCH v2] staging: iio: ad7816: Switch to the gpio descriptor interface
Phil Reid
preid at electromag.com.au
Thu Oct 18 07:28:00 UTC 2018
On 17/10/2018 10:47 PM, Nishad Kamdar wrote:
> Use the gpiod interface for rdwr_pin, convert_pin and busy_pin
> instead of the deprecated old non-descriptor interface.
>
> Signed-off-by: Nishad Kamdar <nishadkamdar at gmail.com>
> ---
> Changes in v2:
> - Correct the error messages as pin number being showed
> has now been replaced by error code.
> ---
> drivers/staging/iio/adc/ad7816.c | 80 ++++++++++++++------------------
> 1 file changed, 34 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
> index bf76a8620bdb..12c4e0ab4713 100644
> --- a/drivers/staging/iio/adc/ad7816.c
> +++ b/drivers/staging/iio/adc/ad7816.c
> @@ -7,7 +7,7 @@
> */
>
> #include <linux/interrupt.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> @@ -44,9 +44,9 @@
>
> struct ad7816_chip_info {
> struct spi_device *spi_dev;
> - u16 rdwr_pin;
> - u16 convert_pin;
> - u16 busy_pin;
> + struct gpio_desc *rdwr_pin;
> + struct gpio_desc *convert_pin;
> + struct gpio_desc *busy_pin;
> u8 oti_data[AD7816_CS_MAX + 1];
> u8 channel_id; /* 0 always be temperature */
> u8 mode;
> @@ -61,28 +61,28 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data)
> int ret = 0;
> __be16 buf;
>
> - gpio_set_value(chip->rdwr_pin, 1);
> - gpio_set_value(chip->rdwr_pin, 0);
> + gpiod_set_value(chip->rdwr_pin, 1);
> + gpiod_set_value(chip->rdwr_pin, 0);
> ret = spi_write(spi_dev, &chip->channel_id, sizeof(chip->channel_id));
> if (ret < 0) {
> dev_err(&spi_dev->dev, "SPI channel setting error\n");
> return ret;
> }
> - gpio_set_value(chip->rdwr_pin, 1);
> + gpiod_set_value(chip->rdwr_pin, 1);
>
> if (chip->mode == AD7816_PD) { /* operating mode 2 */
> - gpio_set_value(chip->convert_pin, 1);
> - gpio_set_value(chip->convert_pin, 0);
> + gpiod_set_value(chip->convert_pin, 1);
> + gpiod_set_value(chip->convert_pin, 0);
> } else { /* operating mode 1 */
> - gpio_set_value(chip->convert_pin, 0);
> - gpio_set_value(chip->convert_pin, 1);
> + gpiod_set_value(chip->convert_pin, 0);
> + gpiod_set_value(chip->convert_pin, 1);
> }
>
> - while (gpio_get_value(chip->busy_pin))
> + while (gpiod_get_value(chip->busy_pin))
> cpu_relax();
>
> - gpio_set_value(chip->rdwr_pin, 0);
> - gpio_set_value(chip->rdwr_pin, 1);
> + gpiod_set_value(chip->rdwr_pin, 0);
> + gpiod_set_value(chip->rdwr_pin, 1);
> ret = spi_read(spi_dev, &buf, sizeof(*data));
> if (ret < 0) {
> dev_err(&spi_dev->dev, "SPI data read error\n");
> @@ -99,8 +99,8 @@ static int ad7816_spi_write(struct ad7816_chip_info *chip, u8 data)
> struct spi_device *spi_dev = chip->spi_dev;
> int ret = 0;
>
> - gpio_set_value(chip->rdwr_pin, 1);
> - gpio_set_value(chip->rdwr_pin, 0);
> + gpiod_set_value(chip->rdwr_pin, 1);
> + gpiod_set_value(chip->rdwr_pin, 0);
> ret = spi_write(spi_dev, &data, sizeof(data));
> if (ret < 0)
> dev_err(&spi_dev->dev, "SPI oti data write error\n");
> @@ -129,10 +129,10 @@ static ssize_t ad7816_store_mode(struct device *dev,
> struct ad7816_chip_info *chip = iio_priv(indio_dev);
>
> if (strcmp(buf, "full")) {
> - gpio_set_value(chip->rdwr_pin, 1);
> + gpiod_set_value(chip->rdwr_pin, 1);
> chip->mode = AD7816_FULL;
> } else {
> - gpio_set_value(chip->rdwr_pin, 0);
> + gpiod_set_value(chip->rdwr_pin, 0);
> chip->mode = AD7816_PD;
> }
>
> @@ -345,15 +345,9 @@ static int ad7816_probe(struct spi_device *spi_dev)
> {
> struct ad7816_chip_info *chip;
> struct iio_dev *indio_dev;
> - unsigned short *pins = dev_get_platdata(&spi_dev->dev);
> int ret = 0;
> int i;
>
> - if (!pins) {
> - dev_err(&spi_dev->dev, "No necessary GPIO platform data.\n");
> - return -EINVAL;
> - }
> -
> indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
> if (!indio_dev)
> return -ENOMEM;
> @@ -364,34 +358,28 @@ static int ad7816_probe(struct spi_device *spi_dev)
> chip->spi_dev = spi_dev;
> for (i = 0; i <= AD7816_CS_MAX; i++)
> chip->oti_data[i] = 203;
> - chip->rdwr_pin = pins[0];
> - chip->convert_pin = pins[1];
> - chip->busy_pin = pins[2];
> -
> - ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
> - spi_get_device_id(spi_dev)->name);
> - if (ret) {
> - dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
> - chip->rdwr_pin);
> +
> + chip->rdwr_pin = devm_gpiod_get(&spi_dev->dev, "rdwr", GPIOD_IN);
> + if (IS_ERR(chip->rdwr_pin)) {
> + ret = PTR_ERR(chip->rdwr_pin);
> + dev_err(&spi_dev->dev, "Failed to request rdwr GPIO: %d\n",
> + ret);
> return ret;
> }
> - gpio_direction_input(chip->rdwr_pin);
The RD/WR pin is an input to the AD78xx. So this doesn't make sense being GPIOD_IN.
> - ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
> - spi_get_device_id(spi_dev)->name);
> - if (ret) {
> - dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
> - chip->convert_pin);
> + chip->convert_pin = devm_gpiod_get(&spi_dev->dev, "convert", GPIOD_IN);
> + if (IS_ERR(chip->convert_pin)) {
> + ret = PTR_ERR(chip->convert_pin);
> + dev_err(&spi_dev->dev, "Failed to request convert GPIO: %d\n",
> + ret);
> return ret;
> }
> - gpio_direction_input(chip->convert_pin);
ditto, the CONVST pin is an input to the AD78xx.
> - ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
> - spi_get_device_id(spi_dev)->name);
> - if (ret) {
> - dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
> - chip->busy_pin);
> + chip->busy_pin = devm_gpiod_get(&spi_dev->dev, "busy", GPIOD_IN);
> + if (IS_ERR(chip->busy_pin)) {
> + ret = PTR_ERR(chip->busy_pin);
> + dev_err(&spi_dev->dev, "Failed to request busy GPIO: %d\n",
> + ret);
> return ret;
> }
> - gpio_direction_input(chip->busy_pin);
The busy pin doesn't exist on the ad7818.
Which the driver claims to support in the id table:
> static const struct spi_device_id ad7816_id[] = {
> { "ad7816", 0 },
> { "ad7817", 0 },
> { "ad7818", 0 },
> {}
> };
See:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7817_7818.pdf
Page 9.
>
> indio_dev->name = spi_get_device_id(spi_dev)->name;
> indio_dev->dev.parent = &spi_dev->dev;
>
Also should the pin names be documented in a device tree binding doc?
--
Regards
Phil Reid
More information about the devel
mailing list