[PATCH v5 10/17] staging: mt7621-pci: rewrite pcie phy related functions
Sergio Paracuellos
sergio.paracuellos at gmail.com
Mon Oct 15 18:23:00 UTC 2018
Function 'bypass_pipe_rst' and 'set_phy_for_ssc' can be
written in a cleaner way. Instead of use comments to see which
bits are the ones which are being enabled add new macros with
that information using BIT and GENMASK kernel macros. Avoid the
use of set_pcie_phy which is kind of dark and use new macros also
resetting and adding bits using bitwise operators directly in the
code. Now these function are offset-based on the port to use them
cleaner in driver probe functio and improving readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos at gmail.com>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 294 +++++++++++++++++++++-----------
1 file changed, 195 insertions(+), 99 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 28c3f0a..5dce7af 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -66,9 +66,6 @@
#define RALINK_PCI_SUBID 0x0038
#define RALINK_PCI_STATUS 0x0050
-#define RALINK_PCIEPHY_P0P1_CTL_OFFSET 0x9000
-#define RALINK_PCIEPHY_P2_CTL_OFFSET 0xA000
-
#define RALINK_PCI_MM_MAP_BASE 0x60000000
#define RALINK_PCI_IO_MAP_BASE 0x1e160000
@@ -79,13 +76,79 @@
#define RALINK_PCIE_CLK_GEN1 0x80
#define MEMORY_BASE 0x0
+
static int pcie_link_status;
+/* pcie phy related macros */
+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET 0x9000
+#define RALINK_PCIEPHY_P2_CTL_OFFSET 0xA000
+
+#define RG_P0_TO_P1_WIDTH 0x100
+
+#define RG_PE1_PIPE_REG 0x02c
+#define RG_PE1_PIPE_RST BIT(12)
+#define RG_PE1_PIPE_CMD_FRC BIT(4)
+
+#define RG_PE1_H_LCDDS_REG 0x49c
+#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0)
+#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0)
+
+#define RG_PE1_FRC_H_XTAL_REG 0x400
+#define RG_PE1_FRC_H_XTAL_TYPE BIT(8)
+#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9)
+#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9)
+
+#define RG_PE1_FRC_PHY_REG 0x000
+#define RG_PE1_FRC_PHY_EN BIT(4)
+#define RG_PE1_PHY_EN BIT(5)
+
+#define RG_PE1_H_PLL_REG 0x490
+#define RG_PE1_H_PLL_BC GENMASK(23, 22)
+#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22)
+#define RG_PE1_H_PLL_BP GENMASK(21, 18)
+#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18)
+#define RG_PE1_H_PLL_IR GENMASK(15, 12)
+#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12)
+#define RG_PE1_H_PLL_IC GENMASK(11, 8)
+#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8)
+#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6)
+#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6)
+#define RG_PE1_PLL_DIVEN GENMASK(3, 1)
+#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1)
+
+#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc
+#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4)
+#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4)
+
+#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4
+#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0)
+#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0)
+
+#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8
+#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0)
+#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0)
+#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16)
+#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16)
+
+#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0
+#define RG_PE1_LCDDS_CLK_PH_INV BIT(5)
+
+#define RG_PE1_H_PLL_BR_REG 0x4ac
+#define RG_PE1_H_PLL_BR GENMASK(18, 16)
+#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16)
+
+#define RG_PE1_MSTCKDIV_REG 0x414
+#define RG_PE1_MSTCKDIV GENMASK(7, 6)
+#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6)
+
+#define RG_PE1_FRC_MSTCKDIV BIT(5)
+
/**
* struct mt7621_pcie_port - PCIe port information
* @base: I/O mapped register base
* @list: port list
* @pcie: pointer to PCIe host info
+ * @phy_reg_offset: offset to related phy registers
* @pcie_rst: pointer to port reset control
* @pcie_clk: PCIe clock
* @slot: port slot
@@ -94,6 +157,7 @@ struct mt7621_pcie_port {
void __iomem *base;
struct list_head list;
struct mt7621_pcie *pcie;
+ u32 phy_reg_offset;
struct reset_control *pcie_rst;
struct clk *pcie_clk;
u32 slot;
@@ -187,109 +251,140 @@ write_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg, u32 val)
}
static void
-set_pcie_phy(struct mt7621_pcie *pcie, u32 offset,
- int start_b, int bits, int val)
+bypass_pipe_rst(struct mt7621_pcie_port *port)
{
+ struct mt7621_pcie *pcie = port->pcie;
+ u32 phy_offset = port->phy_reg_offset;
+ u32 offset = (port->slot != 1) ?
+ phy_offset + RG_PE1_PIPE_REG :
+ phy_offset + RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH;
u32 reg = pcie_read(pcie, offset);
- reg &= ~(((1 << bits) - 1) << start_b);
- reg |= val << start_b;
+ reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC);
+ reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC);
pcie_write(pcie, reg, offset);
}
static void
-bypass_pipe_rst(struct mt7621_pcie *pcie)
+set_phy_for_ssc(struct mt7621_pcie_port *port)
{
- /* PCIe Port 0 */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
- /* PCIe Port 1 */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
- /* PCIe Port 2 */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-}
-
-static void
-set_phy_for_ssc(struct mt7621_pcie *pcie)
-{
- unsigned long reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+ struct mt7621_pcie *pcie = port->pcie;
+ struct device *dev = pcie->dev;
+ u32 phy_offset = port->phy_reg_offset;
+ u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+ u32 offset;
+ u32 val;
reg = (reg >> 6) & 0x7;
- /* Set PCIe Port0 & Port1 PHY to disable SSC */
+ /* Set PCIe Port PHY to disable SSC */
/* Debug Xtal Type */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
- if (reg <= 5 && reg >= 3) { // 40MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
- printk("***** Xtal 40MHz *****\n");
- } else { // 25MHz | 20MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
+ offset = phy_offset + RG_PE1_FRC_H_XTAL_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE);
+ val |= RG_PE1_FRC_H_XTAL_TYPE;
+ val |= RG_PE1_H_XTAL_TYPE_VAL(0x00);
+ pcie_write(pcie, val, offset);
+
+ /* disable port */
+ offset = (port->slot != 1) ?
+ phy_offset + RG_PE1_FRC_PHY_REG :
+ phy_offset + RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
+ val |= RG_PE1_FRC_PHY_EN;
+ pcie_write(pcie, val, offset);
+
+ /* Set Pre-divider ratio (for host mode) */
+ offset = phy_offset + RG_PE1_H_PLL_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_PLL_PREDIV);
+
+ if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
+ val |= RG_PE1_H_PLL_PREDIV_VAL(0x01);
+ pcie_write(pcie, val, offset);
+ dev_info(dev, "Xtal is 40MHz\n");
+ } else { /* 25MHz | 20MHz Xtal */
+ val |= RG_PE1_H_PLL_PREDIV_VAL(0x00);
+ pcie_write(pcie, val, offset);
if (reg >= 6) {
- printk("***** Xtal 25MHz *****\n");
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0, 31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0, 16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
+ dev_info(dev, "Xtal is 25MHz\n");
+
+ /* Select feedback clock */
+ offset = phy_offset + RG_PE1_H_PLL_FBKSEL_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_PLL_FBKSEL);
+ val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01);
+ pcie_write(pcie, val, offset);
+
+ /* DDS NCPO PCW (for host mode) */
+ offset = phy_offset + RG_PE1_H_LCDDS_SSC_PRD_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_LCDDS_SSC_PRD);
+ val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000);
+ pcie_write(pcie, val, offset);
+
+ /* DDS SSC dither period control */
+ offset = phy_offset + RG_PE1_H_LCDDS_SSC_PRD_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_LCDDS_SSC_PRD);
+ val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d);
+ pcie_write(pcie, val, offset);
+
+ /* DDS SSC dither amplitude control */
+ offset = phy_offset + RG_PE1_H_LCDDS_SSC_DELTA_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_LCDDS_SSC_DELTA |
+ RG_PE1_H_LCDDS_SSC_DELTA1);
+ val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a);
+ val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a);
+ pcie_write(pcie, val, offset);
} else {
- printk("***** Xtal 20MHz *****\n");
+ dev_info(dev, "Xtal is 20MHz\n");
}
}
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
- if (reg <= 5 && reg >= 3) { // 40MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
- }
- /* Enable PHY and disable force mode */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
- /* Set PCIe Port2 PHY to disable SSC */
- /* Debug Xtal Type */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
- if (reg <= 5 && reg >= 3) { // 40MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
- } else { // 25MHz | 20MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
- if (reg >= 6) { // 25MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0, 31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0, 16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
- }
- }
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
- if (reg <= 5 && reg >= 3) { // 40MHz Xtal
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
+ /* DDS clock inversion */
+ offset = phy_offset + RG_PE1_LCDDS_CLK_PH_INV_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_LCDDS_CLK_PH_INV);
+ val |= RG_PE1_LCDDS_CLK_PH_INV;
+ pcie_write(pcie, val, offset);
+
+ /* Set PLL bits */
+ offset = phy_offset + RG_PE1_H_PLL_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
+ RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN);
+ val |= RG_PE1_H_PLL_BC_VAL(0x02);
+ val |= RG_PE1_H_PLL_BP_VAL(0x06);
+ val |= RG_PE1_H_PLL_IR_VAL(0x02);
+ val |= RG_PE1_H_PLL_IC_VAL(0x01);
+ val |= RG_PE1_PLL_DIVEN_VAL(0x02);
+ pcie_write(pcie, val, offset);
+
+ offset = phy_offset + RG_PE1_H_PLL_BR_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_H_PLL_BR);
+ val |= RG_PE1_H_PLL_BR_VAL(0x00);
+ pcie_write(pcie, val, offset);
+
+ if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
+ /* set force mode enable of da_pe1_mstckdiv */
+ offset = phy_offset + RG_PE1_MSTCKDIV_REG;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV);
+ val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV);
+ pcie_write(pcie, val, offset);
}
+
/* Enable PHY and disable force mode */
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
- set_pcie_phy(pcie, (RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
+ offset = (port->slot != 1) ?
+ phy_offset + RG_PE1_FRC_PHY_REG :
+ phy_offset + RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
+ val = pcie_read(pcie, offset);
+ val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
+ val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
+ pcie_write(pcie, val, offset);
}
static void setup_cm_memory_region(struct resource *mem_resource)
@@ -394,6 +489,9 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
port->slot = slot;
port->pcie = pcie;
+ port->phy_reg_offset = (slot != 2) ?
+ RALINK_PCIEPHY_P0P1_CTL_OFFSET :
+ RALINK_PCIEPHY_P2_CTL_OFFSET;
INIT_LIST_HEAD(&port->list);
list_add_tail(&port->list, &pcie->ports);
@@ -547,23 +645,21 @@ static int mt7621_pci_probe(struct platform_device *pdev)
mdelay(100);
list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+ u32 slot = port->slot;
+
err = mt7621_pcie_enable_port(port);
if (err) {
- dev_err(dev, "enabling port %d failed\n", port->slot);
+ dev_err(dev, "enabling port %d failed\n", slot);
list_del(&port->list);
+ } else {
+ if ((*(unsigned int *)(0xbe00000c) & 0xFFFF) == 0x0101) // MT7621 E2
+ bypass_pipe_rst(port);
+ set_phy_for_ssc(port);
+ val = read_config(pcie, slot, 0x70c);
+ dev_info(dev, "Port %d N_FTS = %x\n", (unsigned int)val, slot);
}
}
- if ((*(unsigned int *)(0xbe00000c) & 0xFFFF) == 0x0101) // MT7621 E2
- bypass_pipe_rst(pcie);
- set_phy_for_ssc(pcie);
-
- list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
- u32 slot = port->slot;
- val = read_config(pcie, slot, 0x70c);
- dev_info(dev, "Port %d N_FTS = %x\n", (unsigned int)val, slot);
- }
-
rt_sysc_m32(0, RALINK_PCIE_RST, RALINK_RSTCTRL);
rt_sysc_m32(0x30, 2 << 4, SYSC_REG_SYSTEM_CONFIG1);
--
2.7.4
More information about the devel
mailing list