[PATCH 4/6] dt-bindings:iio:resolver: Add docs for ad2s90

Matheus Tavares matheus.bernardino at usp.br
Fri Nov 9 22:00:42 UTC 2018


This patch adds the device tree binding documentation for the ad2s90
resolver-to-digital converter.

Signed-off-by: Matheus Tavares <matheus.bernardino at usp.br>
---
 .../bindings/iio/resolver/ad2s90.txt          | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/resolver/ad2s90.txt

diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
new file mode 100644
index 000000000000..b42cc7752ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt
@@ -0,0 +1,26 @@
+Analog Devices AD2S90 Resolver-to-Digital Converter
+
+https://www.analog.com/en/products/ad2s90.html
+
+Required properties:
+  - compatible : should be "adi,ad2s90"
+  - reg : SPI chip select number for the device
+  - spi-max-frequency : set maximum clock frequency, must be 830000
+  - spi-cpol and spi-cpha : must be defined to enable SPI mode 3
+
+Note about max frequency:
+    Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
+    delay is expected between the application of a logic LO to CS and the
+    application of SCLK, as also specified. And since the delay is not
+    implemented in the spi code, to satisfy it, SCLK's period should be at most
+    2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
+    roughly 830000Hz.
+
+Example:
+resolver at 0 {
+	compatible = "adi,ad2s90";
+	reg = <0>;
+	spi-max-frequency = <830000>;
+	spi-cpol;
+	spi-cpha;
+};
-- 
2.18.0



More information about the devel mailing list