[PATCH v7 2/3] staging: iio: ad2s1210: Drop the gpioin flag.

Jonathan Cameron jic23 at kernel.org
Sat Nov 3 12:59:11 UTC 2018


On Wed, 31 Oct 2018 21:29:53 +0530
Nishad Kamdar <nishadkamdar at gmail.com> wrote:

> Drop gpioin flag which decides how the GPIOs
> are controlled as the GPIOs must be outputs
> for the host as per the datasheet.
> 
> Signed-off-by: Nishad Kamdar <nishadkamdar at gmail.com>
Whilst this does the right thing, it doesn't take advantage
of opportunities to clean up.  I've made a few changes in applying.
See below. Also added a note that this gets rid of the platform data.
Note you need to do git rm drivers/staging/iio/resolver/ad2s1210.h to
actually get rid of the file. + remove it from the includes. I did
that as well whilst here.

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan


> ---
>  drivers/staging/iio/resolver/ad2s1210.c | 45 ++++---------------------
>  drivers/staging/iio/resolver/ad2s1210.h | 17 ----------
>  2 files changed, 6 insertions(+), 56 deletions(-)
> 
> diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
> index 82ac9847f6f4..d3e7d5aad2c8 100644
> --- a/drivers/staging/iio/resolver/ad2s1210.c
> +++ b/drivers/staging/iio/resolver/ad2s1210.c
> @@ -80,15 +80,7 @@ struct ad2s1210_gpio {
>  	unsigned long flags;
>  };
>  
> -static const struct ad2s1210_gpio gpios_in[] = {
> -	[AD2S1210_SAMPLE] = { .name = "adi,sample", .flags = GPIOD_IN },
> -	[AD2S1210_A0] = { .name = "adi,a0", .flags = GPIOD_IN },
> -	[AD2S1210_A1] = { .name = "adi,a1", .flags = GPIOD_IN },
> -	[AD2S1210_RES0] = { .name = "adi,res0", .flags = GPIOD_IN },
> -	[AD2S1210_RES1] = { .name = "adi,res1", .flags = GPIOD_IN },
> -};
> -
> -static const struct ad2s1210_gpio gpios_out[] = {
> +static const struct ad2s1210_gpio gpios[] = {
>  	[AD2S1210_SAMPLE] = { .name = "adi,sample", .flags = GPIOD_OUT_LOW },
>  	[AD2S1210_A0] = { .name = "adi,a0", .flags = GPIOD_OUT_LOW },
>  	[AD2S1210_A1] = { .name = "adi,a1", .flags = GPIOD_OUT_LOW },
> @@ -99,7 +91,6 @@ static const struct ad2s1210_gpio gpios_out[] = {
>  static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 };
>  
>  struct ad2s1210_state {
> -	const struct ad2s1210_platform_data *pdata;
>  	struct mutex lock;
>  	struct spi_device *sdev;
>  	struct gpio_desc *gpios[5];
> @@ -180,14 +171,6 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
>  	return ad2s1210_config_write(st, fcw);
>  }
>  
> -static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
> -{
> -	int resolution = (gpiod_get_value(st->gpios[AD2S1210_RES0]) << 1) |
> -			  gpiod_get_value(st->gpios[AD2S1210_RES1]);
> -
> -	return ad2s1210_resolution_value[resolution];
> -}
> -
>  static const int ad2s1210_res_pins[4][2] = {
>  	{ 0, 0 }, {0, 1}, {1, 0}, {1, 1}
>  };
> @@ -333,13 +316,7 @@ static ssize_t ad2s1210_store_control(struct device *dev,
>  	}
>  	st->resolution
>  		= ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
> -	if (st->pdata->gpioin) {
> -		data = ad2s1210_read_resolution_pin(st);
> -		if (data != st->resolution)
> -			dev_warn(dev, "ad2s1210: resolution settings not match\n");
> -	} else {
> -		ad2s1210_set_resolution_pin(st);
> -	}
> +	ad2s1210_set_resolution_pin(st);
>  	ret = len;
>  	st->hysteresis = !!(data & AD2S1210_ENABLE_HYSTERESIS);
>  
> @@ -395,13 +372,7 @@ static ssize_t ad2s1210_store_resolution(struct device *dev,
>  	}
>  	st->resolution
>  		= ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
> -	if (st->pdata->gpioin) {
> -		data = ad2s1210_read_resolution_pin(st);
> -		if (data != st->resolution)
> -			dev_warn(dev, "ad2s1210: resolution settings not match\n");
> -	} else {
> -		ad2s1210_set_resolution_pin(st);
> -	}
> +	ad2s1210_set_resolution_pin(st);
>  	ret = len;
>  error_ret:
>  	mutex_unlock(&st->lock);
> @@ -622,10 +593,7 @@ static int ad2s1210_initial(struct ad2s1210_state *st)
>  	int ret;
>  
>  	mutex_lock(&st->lock);
> -	if (st->pdata->gpioin)
> -		st->resolution = ad2s1210_read_resolution_pin(st);
> -	else
> -		ad2s1210_set_resolution_pin(st);
> +	ad2s1210_set_resolution_pin(st);
>  
>  	ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL);
>  	if (ret < 0)
> @@ -660,11 +628,11 @@ static const struct iio_info ad2s1210_info = {
>  
>  static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
>  {
> -	struct ad2s1210_gpio *pin = st->pdata->gpioin ? &gpios_in[0] : &gpios_out[0];
> +	struct ad2s1210_gpio *pin = &gpios[0];

This local parameter no longer does anything useful so dropped it.

>  	struct spi_device *spi = st->sdev;
>  	int i, ret;
>  
> -	for (i = 0; i < ARRAY_SIZE(gpios_in); i++) {
> +	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
>  		st->gpios[i] = devm_gpiod_get(&spi->dev, pin[i].name,
>  					      pin[i].flags);
>  		if (IS_ERR(st->gpios[i])) {
> @@ -692,7 +660,6 @@ static int ad2s1210_probe(struct spi_device *spi)
>  	if (!indio_dev)
>  		return -ENOMEM;
>  	st = iio_priv(indio_dev);
> -	st->pdata = spi->dev.platform_data;
>  	ret = ad2s1210_setup_gpios(st);
>  	if (ret < 0)
>  		return ret;
> diff --git a/drivers/staging/iio/resolver/ad2s1210.h b/drivers/staging/iio/resolver/ad2s1210.h
> index 63d479b20a6c..e69de29bb2d1 100644
> --- a/drivers/staging/iio/resolver/ad2s1210.h
> +++ b/drivers/staging/iio/resolver/ad2s1210.h
> @@ -1,17 +0,0 @@
> -/*
> - * ad2s1210.h plaform data for the ADI Resolver to Digital Converters:
> - * AD2S1210
> - *
> - * Copyright (c) 2010-2010 Analog Devices Inc.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -#ifndef _AD2S1210_H
> -#define _AD2S1210_H
> -
> -struct ad2s1210_platform_data {
> -	bool			gpioin;
> -};
> -#endif /* _AD2S1210_H */



More information about the devel mailing list