[PATCH v4 4/5] staging: rtl8192e: Add and remove blank lines - Coding style
John Whitmore
johnfwhitmore at gmail.com
Sat May 26 08:10:18 UTC 2018
Coding style requires blank line after definitions and function definition,
blank lines removed. Correction of some indentation.
Signed-off-by: John Whitmore <johnfwhitmore at gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 96 ++++++++--------------
1 file changed, 34 insertions(+), 62 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 1b61a8de1edf..8021b96771dc 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -111,9 +111,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
pHTInfo->UsbRxFwAggrPacketNum = 8;
pHTInfo->UsbRxFwAggrTimeout = 16; ////usb rx FW aggregation timeout threshold.It's in units of 64us
#endif
-
-
}
+
/********************************************************************************************************************
*function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
@@ -124,7 +123,6 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
* *****************************************************************************************************************/
void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
{
-
static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_CAPABILITY_ELE pCapELE;
@@ -150,6 +148,7 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
return;
}
+
/********************************************************************************************************************
*function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
@@ -271,7 +270,6 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
-
u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -326,12 +324,11 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
}
}
-
-
bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
{
bool retValue = false;
struct ieee80211_network *net = &ieee->current_network;
+
if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
(memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
@@ -364,6 +361,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
struct ieee80211_network *net = &ieee->current_network;
+
if (net->bssht.bdRT2RTAggregation)
pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
else if (net->broadcom_cap_exist)
@@ -389,6 +387,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
}
+
/********************************************************************************************************************
*function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
@@ -400,8 +399,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
- }
-
+}
/**
* Function: HTIOTActIsDisableMCS15
@@ -496,6 +494,7 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
{
u8 retValue = 0;
+
if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
@@ -504,15 +503,12 @@ static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
return retValue;
}
-void HTResetIOTSetting(
- PRT_HIGH_THROUGHPUT pHTInfo
-)
+void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
{
pHTInfo->IOTAction = 0;
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
}
-
/********************************************************************************************************************
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
@@ -536,13 +532,13 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
memset(posHTCap, 0, *len);
if (pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC) {
u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
+
memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
} else {
pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
}
-
//HT capability info
pCapELE->AdvCoding = 0; // This feature is not supported now!!
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
@@ -566,7 +562,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
-
//MAC HT parameters info
// TODO: Nedd to take care of this part
IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
@@ -594,6 +589,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
+
for (i = 1; i < 16; i++)
pCapELE->MCS[i] = 0;
}
@@ -601,7 +597,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//Extended HT Capability Info
memset(&pCapELE->ExtHTCapInfo, 0, 2);
-
//TXBF Capabilities
memset(pCapELE->TxBFCap, 0, 4);
@@ -613,8 +608,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
else
*len = 26 + 2;
-
-
// IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
//Print each field in detail. Driver should not print out this message by default
@@ -622,6 +615,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
return;
}
+
/********************************************************************************************************************
*function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
@@ -636,6 +630,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
PHT_INFORMATION_ELE pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
+
if ((posHTInfo == NULL) || (pHTInfoEle == NULL)) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
return;
@@ -661,7 +656,6 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
memset(pHTInfoEle->BasicMSC, 0, 16);
-
*len = 22 + 2; //same above
} else {
@@ -733,20 +727,14 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
posRT2RTAgg->Octet[5] &= 0xfb;
}
*/
-
#else
// Do Nothing
#endif
posRT2RTAgg->Length = 6;
#endif
-
-
-
-
}
-
/********************************************************************************************************************
*function: Pick the right Rate Adaptive table to use
* input: struct ieee80211_device* ieee
@@ -756,7 +744,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
* *****************************************************************************************************************/
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
- u8 i;
+ u8 i;
+
if (pOperateMCS == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
return false;
@@ -766,30 +755,28 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
case IEEE_A:
case IEEE_B:
case IEEE_G:
- //legacy rate routine handled at selectedrate
+ //legacy rate routine handled at selectedrate
- //no MCS rate
- for (i = 0; i <= 15; i++)
- pOperateMCS[i] = 0;
- break;
+ //no MCS rate
+ for (i = 0; i <= 15; i++)
+ pOperateMCS[i] = 0;
+ break;
case IEEE_N_24G: //assume CCK rate ok
case IEEE_N_5G:
- // Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
- // Legacy part shall be handled at SelectRateSet().
-
- //HT part
- // TODO: may be different if we have different number of antenna
- pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
- pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
- pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
- break;
+ // Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
+ // Legacy part shall be handled at SelectRateSet().
+
+ //HT part
+ // TODO: may be different if we have different number of antenna
+ pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
+ pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
+ pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
+ break;
//should never reach here
default:
-
- break;
-
+ break;
}
return true;
@@ -820,6 +807,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
u8 bitMap;
u8 mcsRate = 0;
u8 availableMcsRate[16];
+
if (pMCSRateSet == NULL || pMCSFilter == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
@@ -849,8 +837,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
return (mcsRate|0x80);
}
-
-
/*
**
**1.Filter our operation rate set with AP's rate set
@@ -863,7 +849,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
-
u8 i = 0;
// filter out operational rate set not supported by AP, the length of it is 16
@@ -871,7 +856,6 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
}
-
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
// TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
@@ -891,6 +875,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
return true;
}
+
void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
void HTOnAssocRsp(struct ieee80211_device *ieee)
{
@@ -924,7 +909,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
-
////////////////////////////////////////////////////////
// Configurations:
////////////////////////////////////////////////////////
@@ -956,8 +940,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// TODO:
pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK &&
(pPeerHTCap->DssCCk == 1);
-
-
//
// Config and configure A-MSDU setting
//
@@ -969,8 +951,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
else
pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
-
-
//
// Config A-MPDU setting
//
@@ -1056,9 +1036,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// Config current operation mode.
//
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
-
-
-
}
void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
@@ -1103,8 +1080,6 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
-
-
// Initialize all of the parameters related to 11n
memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
@@ -1126,11 +1101,13 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
//MCS rate initialized here
{
u8 *RegHTSuppRateSets = &(ieee->RegHTSuppRateSet[0]);
+
RegHTSuppRateSets[0] = 0xFF; //support MCS 0~7
RegHTSuppRateSets[1] = 0xFF; //support MCS 8~15
RegHTSuppRateSets[4] = 0x01; //support MCS 32
}
}
+
/********************************************************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: PBSS_HT pBssHT //to be initialized
@@ -1152,6 +1129,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
}
+
/********************************************************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
@@ -1213,7 +1191,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_ALL_2SS;
-
bIOTAction = HTIOTActIsDisableEDCATurbo(ieee, pNetwork->bssid);
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_EDCA_TURBO;
@@ -1225,8 +1202,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
bIOTAction = HTIOTActIsCCDFsync(pNetwork->bssid);
if (bIOTAction)
pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
-
-
} else {
pHTInfo->bCurrentHTSupport = false;
pHTInfo->bCurrentRT2RTAggregation = false;
@@ -1234,7 +1209,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
pHTInfo->IOTAction = 0;
}
-
}
void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
@@ -1287,8 +1261,6 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
if (!pHTInfo->bRegBW40MHz)
return;
-
-
// To reduce dummy operation
// if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
// (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
--
2.16.3
More information about the devel
mailing list