[PATCH v3 5/7] staging: rtl8192e: Correct style of braces - coding style.
John Whitmore
johnfwhitmore at gmail.com
Fri May 18 17:17:08 UTC 2018
Corrected coding style issue:
ERROR: that open brace { should be on the previous line
Signed-off-by: John Whitmore <johnfwhitmore at gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 203 ++++++++-------------
1 file changed, 72 insertions(+), 131 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 780ef00f8806..275fadb6f365 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -7,28 +7,28 @@ u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0
u8 MCS_FILTER_1SS[16] = {0xff, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-u16 MCS_DATA_RATE[2][2][77] =
- { { {13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260,
- 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
- 0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
- 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
- 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz
- {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
- 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
- 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
- 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
- 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz
- { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
- 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
- 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
- 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
- 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz
- {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
- 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
- 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
- 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
- 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
- };
+u16 MCS_DATA_RATE[2][2][77] = {
+ { {13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260,
+ 39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
+ 0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
+ 195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
+ 286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429}, // Long GI, 20MHz
+ {14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
+ 43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
+ 0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
+ 217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
+ 318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477} }, // Short GI, 20MHz
+ { {27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
+ 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
+ 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
+ 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
+ 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz
+ {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
+ 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
+ 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
+ 450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
+ 660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990} } // Short GI, 40MHz
+};
static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
@@ -128,14 +128,13 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_CAPABILITY_ELE pCapELE;
- if (!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap)))
- {
+ if (!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap))) {
//EWC IE
IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __func__);
pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[4]);
- }else
+ } else {
pCapELE = (PHT_CAPABILITY_ELE)(&CapIE[0]);
-
+ }
IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz" : "20/40MHz");
@@ -165,21 +164,19 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
PHT_INFORMATION_ELE pHTInfoEle;
- if (!memcmp(InfoIE, EWC11NHTInfo, sizeof(EWC11NHTInfo)))
- {
+ if (!memcmp(InfoIE, EWC11NHTInfo, sizeof(EWC11NHTInfo))) {
// Not EWC IE
IEEE80211_DEBUG(IEEE80211_DL_HT, "EWC IE in %s()\n", __func__);
pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[4]);
- }else
+ } else {
pHTInfoEle = (PHT_INFORMATION_ELE)(&InfoIE[0]);
-
+ }
IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Information Element>. Called by %s\n", TitleString);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tPrimary channel = %d\n", pHTInfoEle->ControlChl);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSecondary channel =");
- switch (pHTInfoEle->ExtChlOffset)
- {
+ switch (pHTInfoEle->ExtChlOffset) {
case 0:
IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
break;
@@ -196,8 +193,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz" : "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
- switch (pHTInfoEle->OptMode)
- {
+ switch (pHTInfoEle->OptMode) {
case 0:
IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
break;
@@ -248,15 +244,12 @@ static bool IsHTHalfNmodeSGI(struct ieee80211_device *ieee, bool is40MHz)
retValue = false;
else if (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) // station in half n mode
retValue = false;
- else if (is40MHz) // ap support 40 bw
- {
+ else if (is40MHz) { // ap support 40 bw
if (((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ShortGI40Mhz) // ap support 40 bw short GI
retValue = true;
else
retValue = false;
- }
- else
- {
+ } else {
if (((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ShortGI20Mhz) // ap support 40 bw short GI
retValue = true;
else
@@ -305,35 +298,25 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
u8 is40MHz = 0;
u8 isShortGI = 0;
- if (nDataRate < 12)
- {
+ if (nDataRate < 12) {
return CCKOFDMRate[nDataRate];
- }
- else
- {
- if (nDataRate >= 0x10 && nDataRate <= 0x1f)//if(nDataRate > 11 && nDataRate < 28 )
- {
+ } else {
+ if (nDataRate >= 0x10 && nDataRate <= 0x1f) { //if(nDataRate > 11 && nDataRate < 28 )
is40MHz = 0;
isShortGI = 0;
// nDataRate = nDataRate - 12;
- }
- else if (nDataRate >= 0x20 && nDataRate <= 0x2f ) //(27, 44)
- {
+ } else if (nDataRate >= 0x20 && nDataRate <= 0x2f ) { //(27, 44)
is40MHz = 1;
isShortGI = 0;
//nDataRate = nDataRate - 28;
- }
- else if (nDataRate >= 0x30 && nDataRate <= 0x3f ) //(43, 60)
- {
+ } else if (nDataRate >= 0x30 && nDataRate <= 0x3f ) { //(43, 60)
is40MHz = 0;
isShortGI = 1;
//nDataRate = nDataRate - 44;
- }
- else if (nDataRate >= 0x40 && nDataRate <= 0x4f ) //(59, 76)
- {
+ } else if (nDataRate >= 0x40 && nDataRate <= 0x4f ) { //(59, 76)
is40MHz = 1;
isShortGI = 1;
@@ -505,9 +488,7 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
// 2008/01/28 MH We must prevent that we select null bssid to link.
if (network->broadcom_cap_exist)
- {
retValue = 1;
- }
return retValue;
}
@@ -518,9 +499,7 @@ static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
(memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
- {
retValue = 1;
- }
return retValue;
}
@@ -550,19 +529,16 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
PHT_CAPABILITY_ELE pCapELE = NULL;
//u8 bIsDeclareMCS13;
- if ((posHTCap == NULL) || (pHT == NULL))
- {
+ if ((posHTCap == NULL) || (pHT == NULL)) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTCap or pHTInfo can't be null in HTConstructCapabilityElement()\n");
return;
}
memset(posHTCap, 0, *len);
- if (pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC)
- {
+ if (pHT->ePeerHTSpecVer == HT_SPEC_VER_EWC) {
u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
memcpy(posHTCap, EWC11NHTCap, sizeof(EWC11NHTCap));
pCapELE = (PHT_CAPABILITY_ELE)&(posHTCap[4]);
- }else
- {
+ } else {
pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
}
@@ -570,13 +546,9 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
//HT capability info
pCapELE->AdvCoding = 0; // This feature is not supported now!!
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
- {
pCapELE->ChlWidth = 0;
- }
else
- {
pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
- }
// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
pCapELE->MimoPwrSave = pHT->SelfMimoPs;
@@ -601,9 +573,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (IsEncrypt) {
pCapELE->MPDUDensity = 7; // 8us
pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
- }
- else
- {
+ } else {
pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
pCapELE->MPDUDensity = 0; // no density
}
@@ -621,8 +591,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// 2008.06.12
// For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
- if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
- {
+ if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
for (i = 1; i < 16; i++)
pCapELE->MCS[i] = 0;
@@ -666,15 +635,13 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
PHT_INFORMATION_ELE pHTInfoEle = (PHT_INFORMATION_ELE)posHTInfo;
- if ((posHTInfo == NULL) || (pHTInfoEle == NULL))
- {
+ if ((posHTInfo == NULL) || (pHTInfoEle == NULL)) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "posHTInfo or pHTInfoEle can't be null in HTConstructInfoElement()\n");
return;
}
memset(posHTInfo, 0, *len);
- if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
- {
+ if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
pHTInfoEle->ControlChl = ieee->current_network.channel;
pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
(ieee->current_network.channel <= 6) ?
@@ -696,9 +663,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
*len = 22 + 2; //same above
- }
- else
- {
+ } else {
//STA should not generate High Throughput Information Element
*len = 0;
}
@@ -791,21 +756,19 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
- if (pOperateMCS == NULL)
- {
+ if (pOperateMCS == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pOperateMCS can't be null in HT_PickMCSRate()\n");
return false;
}
- switch (ieee->mode)
- {
+ switch (ieee->mode) {
case IEEE_A:
case IEEE_B:
case IEEE_G:
//legacy rate routine handled at selectedrate
//no MCS rate
- for (i = 0; i <= 15; i++){
+ for (i = 0; i <= 15; i++) {
pOperateMCS[i] = 0;
}
break;
@@ -857,31 +820,25 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
u8 bitMap;
u8 mcsRate = 0;
u8 availableMcsRate[16];
- if (pMCSRateSet == NULL || pMCSFilter == NULL)
- {
+ if (pMCSRateSet == NULL || pMCSFilter == NULL) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
}
for (i = 0; i < 16; i++)
availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
- for (i = 0; i < 16; i++)
- {
+ for (i = 0; i < 16; i++) {
if (availableMcsRate[i] != 0)
break;
}
if (i == 16)
return false;
- for (i = 0; i < 16; i++)
- {
- if (availableMcsRate[i] != 0)
- {
+ for (i = 0; i < 16; i++) {
+ if (availableMcsRate[i] != 0) {
bitMap = availableMcsRate[i];
- for (j = 0; j < 8; j++)
- {
- if ((bitMap%2) != 0)
- {
+ for (j = 0; j < 8; j++) {
+ if ((bitMap%2) != 0) {
if (HTMcsToDataRate(ieee, (8*i+j)) > HTMcsToDataRate(ieee, mcsRate))
mcsRate = (8*i+j);
}
@@ -1022,27 +979,23 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// <1> Decide AMPDU Factor
// By Emily
- if (!pHTInfo->bRegRT2RTAggregation)
- {
+ if (!pHTInfo->bRegRT2RTAggregation) {
// Decide AMPDU Factor according to protocol handshake
if (pHTInfo->AMPDU_Factor > pPeerHTCap->MaxRxAMPDUFactor)
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
- }else
- {
+ } else {
// Set MPDU density to 2 to Realtek AP, and set it to 0 for others
// Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
- if (ieee->current_network.bssht.bdRT2RTAggregation)
- {
+ if (ieee->current_network.bssht.bdRT2RTAggregation) {
if (ieee->pairwise_key_type != KEY_TYPE_NA)
// Realtek may set 32k in security mode and 64k for others
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
pHTInfo->CurrentAMPDUFactor = HT_AGG_SIZE_64K;
- }else
- {
+ } else {
if (pPeerHTCap->MaxRxAMPDUFactor < HT_AGG_SIZE_32K)
pHTInfo->CurrentAMPDUFactor = pPeerHTCap->MaxRxAMPDUFactor;
else
@@ -1062,13 +1015,11 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// Lanhsin: mark for tmp to avoid deauth by ap from s3
//if(memcmp(pMgntInfo->Bssid, NETGEAR834Bv2_BROADCOM, 3)==0)
- if (0)
- {
-
- pHTInfo->bCurrentAMPDUEnable = false;
- pHTInfo->ForcedAMSDUMode = HT_AGG_FORCE_ENABLE;
- pHTInfo->ForcedAMSDUMaxSize = 7935;
-
+ if (0) {
+ pHTInfo->bCurrentAMPDUEnable = false;
+ pHTInfo->ForcedAMSDUMode = HT_AGG_FORCE_ENABLE;
+ pHTInfo->ForcedAMSDUMaxSize = 7935;
+
pHTInfo->IOTAction |= HT_IOT_ACT_TX_USE_AMSDU_8K;
}
@@ -1224,8 +1175,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
IEEE80211_DEBUG(IEEE80211_DL_HT, "==============>%s()\n", __func__);
/*unmark bEnableHT flag here is the same reason why unmarked in function ieee80211_softmac_new_net. WB 2008.09.10*/
// if( pHTInfo->bEnableHT && pNetwork->bssht.bdSupportHT)
- if (pNetwork->bssht.bdSupportHT)
- {
+ if (pNetwork->bssht.bdSupportHT) {
pHTInfo->bCurrentHTSupport = true;
pHTInfo->ePeerHTSpecVer = pNetwork->bssht.bdHTSpecVer;
@@ -1237,13 +1187,10 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
memcpy(pHTInfo->PeerHTInfoBuf, pNetwork->bssht.bdHTInfoBuf, pNetwork->bssht.bdHTInfoLen);
// Check whether RT to RT aggregation mode is enabled
- if (pHTInfo->bRegRT2RTAggregation)
- {
+ if (pHTInfo->bRegRT2RTAggregation) {
pHTInfo->bCurrentRT2RTAggregation = pNetwork->bssht.bdRT2RTAggregation;
pHTInfo->bCurrentRT2RTLongSlotTime = pNetwork->bssht.bdRT2RTLongSlotTime;
- }
- else
- {
+ } else {
pHTInfo->bCurrentRT2RTAggregation = false;
pHTInfo->bCurrentRT2RTLongSlotTime = false;
}
@@ -1280,9 +1227,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
- }
- else
- {
+ } else {
pHTInfo->bCurrentHTSupport = false;
pHTInfo->bCurrentRT2RTAggregation = false;
pHTInfo->bCurrentRT2RTLongSlotTime = false;
@@ -1298,8 +1243,7 @@ void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_
// PHT_CAPABILITY_ELE pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf;
PHT_INFORMATION_ELE pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
- if (pHTInfo->bCurrentHTSupport)
- {
+ if (pHTInfo->bCurrentHTSupport) {
//
// Config current operation mode.
//
@@ -1323,8 +1267,7 @@ EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
********************************************************************************************************************/
u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
{
- if (ieee->pHTInfo->bCurrentHTSupport)
- {
+ if (ieee->pHTInfo->bCurrentHTSupport) {
if ((IsQoSDataFrame(pFrame) && Frame_Order(pFrame)) == 1) {
IEEE80211_DEBUG(IEEE80211_DL_HT, "HT CONTROL FILED EXIST!!\n");
return true;
@@ -1357,8 +1300,7 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
return;
}
//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
- if (Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
- {
+ if (Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))) {
// Handle Illegal extension channel offset!!
if (ieee->current_network.channel < 2 && Offset == HT_EXTCHNL_OFFSET_LOWER)
Offset = HT_EXTCHNL_OFFSET_NO_EXT;
@@ -1391,8 +1333,7 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_HT, "======>%s()\n", __func__);
- if (pHTInfo->bCurBW40MHz)
- {
+ if (pHTInfo->bCurBW40MHz) {
if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_UPPER)
ieee->set_chan(ieee->dev, ieee->current_network.channel + 2);
else if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_LOWER)
--
2.16.3
More information about the devel
mailing list