[PATCH 04/27] drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc: correct spaces around operators
John Whitmore
johnfwhitmore at gmail.com
Mon May 14 21:24:11 UTC 2018
Coding style edit to clear the checkpatch.pl errors of the type:
ERROR: spaces required around that...
Signed-off-by: John Whitmore <johnfwhitmore at gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 122 ++++++++++-----------
1 file changed, 61 insertions(+), 61 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index d4ab8481ee30..f66f181e24f2 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -60,8 +60,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p, offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
//printk("===>ieee:%p,\n", ieee);
// ShortGI support
- pHTInfo->bRegShortGI20MHz= 1;
- pHTInfo->bRegShortGI40MHz= 1;
+ pHTInfo->bRegShortGI20MHz = 1;
+ pHTInfo->bRegShortGI40MHz = 1;
// 40MHz channel support
pHTInfo->bRegBW40MHz = 1;
@@ -137,12 +137,12 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString);
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz)?"YES": "NO");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC)?"YES": "NO");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize)?"3839": "7935");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk)?"YES": "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth) ? "20MHz" : "20/40MHz");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz) ? "YES" : "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz) ? "YES" : "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC) ? "YES" : "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize) ? "3839" : "7935");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMPDU Factor = %d\n", pCapELE->MaxRxAMPDUFactor);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
@@ -190,7 +190,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
break;
}
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth) ? "20Mhz" : "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
switch (pHTInfoEle->OptMode) {
@@ -266,8 +266,8 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
u8 is40MHz;
u8 isShortGI;
- is40MHz = (IsHTHalfNmode40Bandwidth(ieee))?1:0;
- isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz))? 1:0;
+ is40MHz = (IsHTHalfNmode40Bandwidth(ieee)) ? 1 : 0;
+ isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz)) ? 1 : 0;
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
@@ -277,10 +277,10 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- u8 is40MHz = (pHTInfo->bCurBW40MHz)?1:0;
- u8 isShortGI = (pHTInfo->bCurBW40MHz)?
- ((pHTInfo->bCurShortGI40MHz)?1:0):
- ((pHTInfo->bCurShortGI20MHz)?1:0);
+ u8 is40MHz = (pHTInfo->bCurBW40MHz) ? 1 : 0;
+ u8 isShortGI = (pHTInfo->bCurBW40MHz) ?
+ ((pHTInfo->bCurShortGI40MHz) ? 1 : 0) :
+ ((pHTInfo->bCurShortGI20MHz) ? 1 : 0);
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
@@ -308,7 +308,7 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
isShortGI = 0;
// nDataRate = nDataRate - 12;
- } else if(nDataRate >=0x20 && nDataRate <= 0x2f) { //(27, 44)
+ } else if(nDataRate >= 0x20 && nDataRate <= 0x2f) { //(27, 44)
is40MHz = 1;
isShortGI = 0;
@@ -334,17 +334,17 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
{
bool retValue = false;
struct ieee80211_network *net = &ieee->current_network;
- if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
- (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
- (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
- (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
- (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+ if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
(net->ralink_cap_exist))
retValue = true;
- else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
+ else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) ||
(net->broadcom_cap_exist))
retValue = true;
else if(net->bssht.bdRT2RTAggregation)
@@ -370,21 +370,21 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
else if(net->broadcom_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
- else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0))
+ else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0))
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
- else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
- (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
- (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
- (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
- (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+ else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
net->ralink_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
else if(net->atheros_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
- else if(memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
+ else if(memcmp(net->bssid, CISCO_BROADCOM, 3) == 0)
pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
else
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
@@ -423,7 +423,7 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
#ifdef TODO
// Apply for 819u only
-#if (HAL_CODE_BASE==RTL8192)
+#if (HAL_CODE_BASE == RTL8192)
#if (DEV_BUS_TYPE == USB_INTERFACE)
// Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
@@ -498,9 +498,9 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
{
u8 retValue = 0;
- if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
+ if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
+ (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
retValue = 1;
return retValue;
@@ -550,7 +550,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pCapELE->ChlWidth = 0;
else
- pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
+ pCapELE->ChlWidth = (pHT->bRegBW40MHz ? 1 : 0);
// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
pCapELE->MimoPwrSave = pHT->SelfMimoPs;
@@ -562,8 +562,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->TxSTBC = 1;
pCapELE->RxSTBC = 0;
pCapELE->DelayBA = 0; // Do not support now!!
- pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
- pCapELE->DssCCk = ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
+ pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE >= 7935) ? 1 : 0;
+ pCapELE->DssCCk = ((pHT->bRegBW40MHz) ? (pHT->bRegSuppCCK ? 1 : 0) : 0);
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
@@ -595,7 +595,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
- for(i = 1; i< 16; i++)
+ for(i = 1; i < 16; i++)
pCapELE->MCS[i] = 0;
}
@@ -645,9 +645,9 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
memset(posHTInfo, 0, *len);
if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
pHTInfoEle->ControlChl = ieee->current_network.channel;
- pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
- (ieee->current_network.channel<=6)?
- HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
+ pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
+ (ieee->current_network.channel <= 6) ?
+ HT_EXTCHNL_OFFSET_UPPER : HT_EXTCHNL_OFFSET_LOWER);
pHTInfoEle->RecommemdedTxWidth = pHT->bRegBW40MHz;
pHTInfoEle->RIFS = 0;
pHTInfoEle->PSMPAccessOnly = 0;
@@ -770,7 +770,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//legacy rate routine handled at selectedrate
//no MCS rate
- for(i=0;i<=15;i++) {
+ for(i = 0; i <= 15; i++) {
pOperateMCS[i] = 0;
}
break;
@@ -782,9 +782,9 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//HT part
// TODO: may be different if we have different number of antenna
- pOperateMCS[0] &=RATE_ADPT_1SS_MASK; //support MCS 0~7
- pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
- pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
+ pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
+ pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
+ pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
break;
//should never reach here
@@ -826,7 +826,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
}
- for(i=0; i<16; i++)
+ for(i = 0; i < 16; i++)
availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
for(i = 0; i < 16; i++) {
@@ -866,10 +866,10 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
- u8 i=0;
+ u8 i = 0;
// filter out operational rate set not supported by AP, the length of it is 16
- for(i=0;i<=15;i++){
+ for(i = 0; i <= 15; i++){
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
}
@@ -888,7 +888,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// For RTL819X, we support only MCS0~15.
// And also, we do not know how to use MCS32 now.
//
- for(i=2; i<=15; i++)
+ for(i = 2; i <= 15; i++)
pOperateMCS[i] = 0;
return true;
@@ -965,7 +965,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
//
pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
- nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize==0)?3839:7935;
+ nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
if(pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize)
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
@@ -1149,7 +1149,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
memset(pBssHT->bdHTInfoBuf, 0, sizeof(pBssHT->bdHTInfoBuf));
pBssHT->bdHTInfoLen = 0;
- pBssHT->bdHTSpecVer= HT_SPEC_VER_IEEE;
+ pBssHT->bdHTSpecVer = HT_SPEC_VER_IEEE;
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
@@ -1302,11 +1302,11 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
return;
}
//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
- if(Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))) {
+ if(Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))) {
// Handle Illegal extension channel offset!!
- if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
+ if(ieee->current_network.channel < 2 && Offset == HT_EXTCHNL_OFFSET_LOWER)
Offset = HT_EXTCHNL_OFFSET_NO_EXT;
- if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
+ if(Offset == HT_EXTCHNL_OFFSET_UPPER || Offset == HT_EXTCHNL_OFFSET_LOWER) {
pHTInfo->bCurBW40MHz = true;
pHTInfo->CurSTAExtChnlOffset = Offset;
} else {
@@ -1336,9 +1336,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_HT, "======>%s()\n", __func__);
if(pHTInfo->bCurBW40MHz) {
- if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_UPPER)
+ if(pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_UPPER)
ieee->set_chan(ieee->dev, ieee->current_network.channel+2);
- else if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_LOWER)
+ else if(pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_LOWER)
ieee->set_chan(ieee->dev, ieee->current_network.channel-2);
else
ieee->set_chan(ieee->dev, ieee->current_network.channel);
--
2.16.3
More information about the devel
mailing list