[PATCH 02/13] coding style chages to the switch statements in the file.

[John Whitmore]

Signed-off-by: John Whitmore <johnfwhitmore at gmail.com>
---
 .../staging/rtl8192u/ieee80211/rtl819x_HTProc.c    | 93 ++++++++++------------
 1 file changed, 44 insertions(+), 49 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 17a720966253..9e596577e544 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -187,38 +187,36 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
 
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tPrimary channel = %d\n", pHTInfoEle->ControlChl);
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSecondary channel =");
-	switch (pHTInfoEle->ExtChlOffset)
-	{
-		case 0:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
-			break;
-		case 1:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "Upper channel\n");
-			break;
-		case 2:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "Reserved. Eooro!!!\n");
-			break;
-		case 3:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
-			break;
+	switch (pHTInfoEle->ExtChlOffset) {
+	case 0:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
+		break;
+	case 1:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "Upper channel\n");
+		break;
+	case 2:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "Reserved. Eooro!!!\n");
+		break;
+	case 3:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
+		break;
 	}
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
 
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
-	switch (pHTInfoEle->OptMode)
-	{
-		case 0:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
-			break;
-		case 1:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "HT non-member protection mode\n");
-			break;
-		case 2:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "Suggest to open protection\n");
-			break;
-		case 3:
-			IEEE80211_DEBUG(IEEE80211_DL_HT, "HT mixed mode\n");
-			break;
+	switch (pHTInfoEle->OptMode) {
+	case 0:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
+		break;
+	case 1:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "HT non-member protection mode\n");
+		break;
+	case 2:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "Suggest to open protection\n");
+		break;
+	case 3:
+		IEEE80211_DEBUG(IEEE80211_DL_HT, "HT mixed mode\n");
+		break;
 	}
 
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tBasic MCS Rate Set = [%x][%x][%x][%x][%x]\n", pHTInfoEle->BasicMSC[0],\
@@ -821,36 +819,33 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
 		return false;
 	}
 
-	switch (ieee->mode)
-	{
+	switch (ieee->mode) {
 	case IEEE_A:
 	case IEEE_B:
 	case IEEE_G:
-			//legacy rate routine handled at selectedrate
+		//legacy rate routine handled at selectedrate
 
-			//no MCS rate
-			for(i=0;i<=15;i++){
-				pOperateMCS[i] = 0;
-			}
-			break;
+		//no MCS rate
+		for(i=0;i<=15;i++){
+			pOperateMCS[i] = 0;
+		}
+		break;
 
 	case IEEE_N_24G:	//assume CCK rate ok
 	case IEEE_N_5G:
-			// Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
-			// Legacy part shall be handled at SelectRateSet().
-
-			//HT part
-			// TODO: may be different if we have different number of antenna
-			pOperateMCS[0] &=RATE_ADPT_1SS_MASK;	//support MCS 0~7
-			pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
-			pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
-			break;
+		// Legacy part we only use 6, 5.5,2,1 for N_24G and 6 for N_5G.
+		// Legacy part shall be handled at SelectRateSet().
 
-	//should never reach here
-	default:
-
-			break;
+		//HT part
+		// TODO: may be different if we have different number of antenna
+		pOperateMCS[0] &=RATE_ADPT_1SS_MASK;	//support MCS 0~7
+		pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
+		pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
+		break;
 
+		//should never reach here
+	default:
+		break;
 	}
 
 	return true;
-- 
2.16.3