[PATCH 1/3] staging: hwmon: Fix SPACING errors

[Guenter Roeck]

On Tue, Jun 12, 2018 at 08:56:58PM +0200, Jakob Albert wrote:
> Fix SPACING errors in drivers/hwmon/nct7904.c reported by checkpatch.pl
> 

Subject for all patches in this series should be

hwmon: (nct7904) <Summary>

There is no need to reference the file name in the patch description.
It is obvious from both Subject and the patch itself.

linux-hwmon at vger.kernel.org needs to be in Cc:.

As Greg already mentioned, this series has nothing to do with staging.

Thanks,
Guenter

> Signed-off-by: Lorenz Kaestle <lorenz.kaestle at fau.de>
> Signed-off-by: Jakob Albert <jakob.j.albert at fau.de>
> ---
>  drivers/hwmon/nct7904.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
> index 95a68ab..7de2421 100644
> --- a/drivers/hwmon/nct7904.c
> +++ b/drivers/hwmon/nct7904.c
> @@ -159,7 +159,7 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
>  	unsigned int cnt, rpm;
>  	int ret;
>  
> -	switch(attr) {
> +	switch (attr) {
>  	case hwmon_fan_input:
>  		ret = nct7904_read_reg16(data, BANK_0,
>  					 FANIN1_HV_REG + channel * 2);
> @@ -200,7 +200,7 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
>  
>  	index = nct7904_chan_to_index[channel];
>  
> -	switch(attr) {
> +	switch (attr) {
>  	case hwmon_in_input:
>  		ret = nct7904_read_reg16(data, BANK_0,
>  					 VSEN1_HV_REG + index * 2);
> @@ -236,7 +236,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
>  	struct nct7904_data *data = dev_get_drvdata(dev);
>  	int ret, temp;
>  
> -	switch(attr) {
> +	switch (attr) {
>  	case hwmon_temp_input:
>  		if (channel == 0)
>  			ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG);
> @@ -276,7 +276,7 @@ static int nct7904_read_pwm(struct device *dev, u32 attr, int channel,
>  	struct nct7904_data *data = dev_get_drvdata(dev);
>  	int ret;
>  
> -	switch(attr) {
> +	switch (attr) {
>  	case hwmon_pwm_input:
>  		ret = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + channel);
>  		if (ret < 0)
> @@ -301,7 +301,7 @@ static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
>  	struct nct7904_data *data = dev_get_drvdata(dev);
>  	int ret;
>  
> -	switch(attr) {
> +	switch (attr) {
>  	case hwmon_pwm_input:
>  		if (val < 0 || val > 255)
>  			return -EINVAL;
> @@ -322,7 +322,7 @@ static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
>  
>  static umode_t nct7904_pwm_is_visible(const void *_data, u32 attr, int channel)
>  {
> -	switch(attr) {
> +	switch (attr) {
>  	case hwmon_pwm_input:
>  	case hwmon_pwm_enable:
>  		return S_IRUGO | S_IWUSR;
> -- 
> 2.7.4
>