[PATCH 03/15] staging: gasket: interrupt: remove static function forward declarations
Todd Poynor
toddpoynor at gmail.com
Tue Jul 31 20:24:36 UTC 2018
From: Todd Poynor <toddpoynor at google.com>
Remove forward declarations of static functions, move code to avoid
forward references, for kernel style.
Signed-off-by: Todd Poynor <toddpoynor at google.com>
---
drivers/staging/gasket/gasket_interrupt.c | 499 +++++++++++-----------
1 file changed, 242 insertions(+), 257 deletions(-)
diff --git a/drivers/staging/gasket/gasket_interrupt.c b/drivers/staging/gasket/gasket_interrupt.c
index 27fde991edc6..3079b59b122b 100644
--- a/drivers/staging/gasket/gasket_interrupt.c
+++ b/drivers/staging/gasket/gasket_interrupt.c
@@ -70,32 +70,259 @@ struct gasket_interrupt_data {
int irq;
};
-/* Function definitions. */
-static ssize_t interrupt_sysfs_show(
- struct device *device, struct device_attribute *attr, char *buf);
-
-static irqreturn_t gasket_msix_interrupt_handler(int irq, void *dev_id);
-
/* Structures to display interrupt counts in sysfs. */
enum interrupt_sysfs_attribute_type {
ATTR_INTERRUPT_COUNTS,
};
+/* Set up device registers for interrupt handling. */
+static void gasket_interrupt_setup(struct gasket_dev *gasket_dev)
+{
+ int i;
+ int pack_shift;
+ ulong mask;
+ ulong value;
+ struct gasket_interrupt_data *interrupt_data =
+ gasket_dev->interrupt_data;
+
+ if (!interrupt_data) {
+ dev_dbg(gasket_dev->dev, "Interrupt data is not initialized\n");
+ return;
+ }
+
+ dev_dbg(gasket_dev->dev, "Running interrupt setup\n");
+
+ if (interrupt_data->type == PLATFORM_WIRE ||
+ interrupt_data->type == PCI_MSI) {
+ /* Nothing needs to be done for platform or PCI devices. */
+ return;
+ }
+
+ if (interrupt_data->type != PCI_MSIX) {
+ dev_dbg(gasket_dev->dev,
+ "Cannot handle unsupported interrupt type %d\n",
+ interrupt_data->type);
+ return;
+ }
+
+ /* Setup the MSIX table. */
+
+ for (i = 0; i < interrupt_data->num_interrupts; i++) {
+ /*
+ * If the interrupt is not packed, we can write the index into
+ * the register directly. If not, we need to deal with a read-
+ * modify-write and shift based on the packing index.
+ */
+ dev_dbg(gasket_dev->dev,
+ "Setting up interrupt index %d with index 0x%llx and "
+ "packing %d\n",
+ interrupt_data->interrupts[i].index,
+ interrupt_data->interrupts[i].reg,
+ interrupt_data->interrupts[i].packing);
+ if (interrupt_data->interrupts[i].packing == UNPACKED) {
+ value = interrupt_data->interrupts[i].index;
+ } else {
+ switch (interrupt_data->interrupts[i].packing) {
+ case PACK_0:
+ pack_shift = 0;
+ break;
+ case PACK_1:
+ pack_shift = interrupt_data->pack_width;
+ break;
+ case PACK_2:
+ pack_shift = 2 * interrupt_data->pack_width;
+ break;
+ case PACK_3:
+ pack_shift = 3 * interrupt_data->pack_width;
+ break;
+ default:
+ dev_dbg(gasket_dev->dev,
+ "Found interrupt description with "
+ "unknown enum %d\n",
+ interrupt_data->interrupts[i].packing);
+ return;
+ }
+
+ mask = ~(0xFFFF << pack_shift);
+ value = gasket_dev_read_64(
+ gasket_dev,
+ interrupt_data->interrupt_bar_index,
+ interrupt_data->interrupts[i].reg) &
+ mask;
+ value |= interrupt_data->interrupts[i].index
+ << pack_shift;
+ }
+ gasket_dev_write_64(gasket_dev, value,
+ interrupt_data->interrupt_bar_index,
+ interrupt_data->interrupts[i].reg);
+ }
+}
+
+static irqreturn_t gasket_msix_interrupt_handler(int irq, void *dev_id)
+{
+ struct eventfd_ctx *ctx;
+ struct gasket_interrupt_data *interrupt_data = dev_id;
+ int interrupt = -1;
+ int i;
+
+ /* If this linear lookup is a problem, we can maintain a map/hash. */
+ for (i = 0; i < interrupt_data->num_interrupts; i++) {
+ if (interrupt_data->msix_entries[i].vector == irq) {
+ interrupt = interrupt_data->msix_entries[i].entry;
+ break;
+ }
+ }
+ if (interrupt == -1) {
+ pr_err("Received unknown irq %d\n", irq);
+ return IRQ_HANDLED;
+ }
+ trace_gasket_interrupt_event(interrupt_data->name, interrupt);
+
+ ctx = interrupt_data->eventfd_ctxs[interrupt];
+ if (ctx)
+ eventfd_signal(ctx, 1);
+
+ ++(interrupt_data->interrupt_counts[interrupt]);
+
+ return IRQ_HANDLED;
+}
+
+static int gasket_interrupt_msix_init(
+ struct gasket_interrupt_data *interrupt_data)
+{
+ int ret = 1;
+ int i;
+
+ for (i = 0; i < interrupt_data->num_interrupts; i++) {
+ interrupt_data->msix_entries[i].entry = i;
+ interrupt_data->msix_entries[i].vector = 0;
+ interrupt_data->eventfd_ctxs[i] = NULL;
+ }
+
+ /* Retry MSIX_RETRY_COUNT times if not enough IRQs are available. */
+ for (i = 0; i < MSIX_RETRY_COUNT && ret > 0; i++)
+ ret = pci_enable_msix_exact(interrupt_data->pci_dev,
+ interrupt_data->msix_entries,
+ interrupt_data->num_interrupts);
+
+ if (ret)
+ return ret > 0 ? -EBUSY : ret;
+ interrupt_data->msix_configured = 1;
+
+ for (i = 0; i < interrupt_data->num_interrupts; i++) {
+ ret = request_irq(
+ interrupt_data->msix_entries[i].vector,
+ gasket_msix_interrupt_handler, 0, interrupt_data->name,
+ interrupt_data);
+
+ if (ret) {
+ dev_err(&interrupt_data->pci_dev->dev,
+ "Cannot get IRQ for interrupt %d, vector %d; "
+ "%d\n",
+ i, interrupt_data->msix_entries[i].vector, ret);
+ return ret;
+ }
+
+ interrupt_data->num_configured++;
+ }
+
+ return 0;
+}
+
+/*
+ * On QCM DragonBoard, we exit gasket_interrupt_msix_init() and kernel interrupt
+ * setup code with MSIX vectors masked. This is wrong because nothing else in
+ * the driver will normally touch the MSIX vectors.
+ *
+ * As a temporary hack, force unmasking there.
+ *
+ * TODO: Figure out why QCM kernel doesn't unmask the MSIX vectors, after
+ * gasket_interrupt_msix_init(), and remove this code.
+ */
+static void force_msix_interrupt_unmasking(struct gasket_dev *gasket_dev)
+{
+ int i;
+#define MSIX_VECTOR_SIZE 16
+#define MSIX_MASK_BIT_OFFSET 12
+#define APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE 0x46800
+ for (i = 0; i < gasket_dev->interrupt_data->num_configured; i++) {
+ /* Check if the MSIX vector is unmasked */
+ ulong location = APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE +
+ MSIX_MASK_BIT_OFFSET + i * MSIX_VECTOR_SIZE;
+ u32 mask =
+ gasket_dev_read_32(
+ gasket_dev,
+ gasket_dev->interrupt_data->interrupt_bar_index,
+ location);
+ if (!(mask & 1))
+ continue;
+ /* Unmask the msix vector (clear 32 bits) */
+ gasket_dev_write_32(
+ gasket_dev, 0,
+ gasket_dev->interrupt_data->interrupt_bar_index,
+ location);
+ }
+#undef MSIX_VECTOR_SIZE
+#undef MSIX_MASK_BIT_OFFSET
+#undef APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE
+}
+
+static ssize_t interrupt_sysfs_show(
+ struct device *device, struct device_attribute *attr, char *buf)
+{
+ int i, ret;
+ ssize_t written = 0, total_written = 0;
+ struct gasket_interrupt_data *interrupt_data;
+ struct gasket_dev *gasket_dev;
+ struct gasket_sysfs_attribute *gasket_attr;
+ enum interrupt_sysfs_attribute_type sysfs_type;
+
+ gasket_dev = gasket_sysfs_get_device_data(device);
+ if (!gasket_dev) {
+ dev_dbg(device, "No sysfs mapping found for device\n");
+ return 0;
+ }
+
+ gasket_attr = gasket_sysfs_get_attr(device, attr);
+ if (!gasket_attr) {
+ dev_dbg(device, "No sysfs attr data found for device\n");
+ gasket_sysfs_put_device_data(device, gasket_dev);
+ return 0;
+ }
+
+ sysfs_type = (enum interrupt_sysfs_attribute_type)
+ gasket_attr->data.attr_type;
+ interrupt_data = gasket_dev->interrupt_data;
+ switch (sysfs_type) {
+ case ATTR_INTERRUPT_COUNTS:
+ for (i = 0; i < interrupt_data->num_interrupts; ++i) {
+ written =
+ scnprintf(buf, PAGE_SIZE - total_written,
+ "0x%02x: %ld\n", i,
+ interrupt_data->interrupt_counts[i]);
+ total_written += written;
+ buf += written;
+ }
+ ret = total_written;
+ break;
+ default:
+ dev_dbg(gasket_dev->dev, "Unknown attribute: %s\n",
+ attr->attr.name);
+ ret = 0;
+ break;
+ }
+
+ gasket_sysfs_put_attr(device, gasket_attr);
+ gasket_sysfs_put_device_data(device, gasket_dev);
+ return ret;
+}
+
static struct gasket_sysfs_attribute interrupt_sysfs_attrs[] = {
GASKET_SYSFS_RO(
interrupt_counts, interrupt_sysfs_show, ATTR_INTERRUPT_COUNTS),
GASKET_END_OF_ATTR_ARRAY,
};
-static void gasket_interrupt_setup(struct gasket_dev *gasket_dev);
-
-/* MSIX init and cleanup. */
-static int gasket_interrupt_msix_init(
- struct gasket_interrupt_data *interrupt_data);
-static void gasket_interrupt_msix_cleanup(
- struct gasket_interrupt_data *interrupt_data);
-static void force_msix_interrupt_unmasking(struct gasket_dev *gasket_dev);
-
int gasket_interrupt_init(
struct gasket_dev *gasket_dev, const char *name, int type,
const struct gasket_interrupt_desc *interrupts,
@@ -181,48 +408,6 @@ int gasket_interrupt_init(
return 0;
}
-static int gasket_interrupt_msix_init(
- struct gasket_interrupt_data *interrupt_data)
-{
- int ret = 1;
- int i;
-
- for (i = 0; i < interrupt_data->num_interrupts; i++) {
- interrupt_data->msix_entries[i].entry = i;
- interrupt_data->msix_entries[i].vector = 0;
- interrupt_data->eventfd_ctxs[i] = NULL;
- }
-
- /* Retry MSIX_RETRY_COUNT times if not enough IRQs are available. */
- for (i = 0; i < MSIX_RETRY_COUNT && ret > 0; i++)
- ret = pci_enable_msix_exact(interrupt_data->pci_dev,
- interrupt_data->msix_entries,
- interrupt_data->num_interrupts);
-
- if (ret)
- return ret > 0 ? -EBUSY : ret;
- interrupt_data->msix_configured = 1;
-
- for (i = 0; i < interrupt_data->num_interrupts; i++) {
- ret = request_irq(
- interrupt_data->msix_entries[i].vector,
- gasket_msix_interrupt_handler, 0, interrupt_data->name,
- interrupt_data);
-
- if (ret) {
- dev_err(&interrupt_data->pci_dev->dev,
- "Cannot get IRQ for interrupt %d, vector %d; "
- "%d\n",
- i, interrupt_data->msix_entries[i].vector, ret);
- return ret;
- }
-
- interrupt_data->num_configured++;
- }
-
- return 0;
-}
-
static void gasket_interrupt_msix_cleanup(
struct gasket_interrupt_data *interrupt_data)
{
@@ -238,44 +423,6 @@ static void gasket_interrupt_msix_cleanup(
interrupt_data->msix_configured = 0;
}
-/*
- * On QCM DragonBoard, we exit gasket_interrupt_msix_init() and kernel interrupt
- * setup code with MSIX vectors masked. This is wrong because nothing else in
- * the driver will normally touch the MSIX vectors.
- *
- * As a temporary hack, force unmasking there.
- *
- * TODO: Figure out why QCM kernel doesn't unmask the MSIX vectors, after
- * gasket_interrupt_msix_init(), and remove this code.
- */
-static void force_msix_interrupt_unmasking(struct gasket_dev *gasket_dev)
-{
- int i;
-#define MSIX_VECTOR_SIZE 16
-#define MSIX_MASK_BIT_OFFSET 12
-#define APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE 0x46800
- for (i = 0; i < gasket_dev->interrupt_data->num_configured; i++) {
- /* Check if the MSIX vector is unmasked */
- ulong location = APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE +
- MSIX_MASK_BIT_OFFSET + i * MSIX_VECTOR_SIZE;
- u32 mask =
- gasket_dev_read_32(
- gasket_dev,
- gasket_dev->interrupt_data->interrupt_bar_index,
- location);
- if (!(mask & 1))
- continue;
- /* Unmask the msix vector (clear 32 bits) */
- gasket_dev_write_32(
- gasket_dev, 0,
- gasket_dev->interrupt_data->interrupt_bar_index,
- location);
- }
-#undef MSIX_VECTOR_SIZE
-#undef MSIX_MASK_BIT_OFFSET
-#undef APEX_BAR2_REG_KERNEL_HIB_MSIX_TABLE
-}
-
int gasket_interrupt_reinit(struct gasket_dev *gasket_dev)
{
int ret;
@@ -327,89 +474,6 @@ int gasket_interrupt_reset_counts(struct gasket_dev *gasket_dev)
return 0;
}
-/* Set up device registers for interrupt handling. */
-static void gasket_interrupt_setup(struct gasket_dev *gasket_dev)
-{
- int i;
- int pack_shift;
- ulong mask;
- ulong value;
- struct gasket_interrupt_data *interrupt_data =
- gasket_dev->interrupt_data;
-
- if (!interrupt_data) {
- dev_dbg(gasket_dev->dev, "Interrupt data is not initialized\n");
- return;
- }
-
- dev_dbg(gasket_dev->dev, "Running interrupt setup\n");
-
- if (interrupt_data->type == PLATFORM_WIRE ||
- interrupt_data->type == PCI_MSI) {
- /* Nothing needs to be done for platform or PCI devices. */
- return;
- }
-
- if (interrupt_data->type != PCI_MSIX) {
- dev_dbg(gasket_dev->dev,
- "Cannot handle unsupported interrupt type %d\n",
- interrupt_data->type);
- return;
- }
-
- /* Setup the MSIX table. */
-
- for (i = 0; i < interrupt_data->num_interrupts; i++) {
- /*
- * If the interrupt is not packed, we can write the index into
- * the register directly. If not, we need to deal with a read-
- * modify-write and shift based on the packing index.
- */
- dev_dbg(gasket_dev->dev,
- "Setting up interrupt index %d with index 0x%llx and "
- "packing %d\n",
- interrupt_data->interrupts[i].index,
- interrupt_data->interrupts[i].reg,
- interrupt_data->interrupts[i].packing);
- if (interrupt_data->interrupts[i].packing == UNPACKED) {
- value = interrupt_data->interrupts[i].index;
- } else {
- switch (interrupt_data->interrupts[i].packing) {
- case PACK_0:
- pack_shift = 0;
- break;
- case PACK_1:
- pack_shift = interrupt_data->pack_width;
- break;
- case PACK_2:
- pack_shift = 2 * interrupt_data->pack_width;
- break;
- case PACK_3:
- pack_shift = 3 * interrupt_data->pack_width;
- break;
- default:
- dev_dbg(gasket_dev->dev,
- "Found interrupt description with "
- "unknown enum %d\n",
- interrupt_data->interrupts[i].packing);
- return;
- }
-
- mask = ~(0xFFFF << pack_shift);
- value = gasket_dev_read_64(
- gasket_dev,
- interrupt_data->interrupt_bar_index,
- interrupt_data->interrupts[i].reg) &
- mask;
- value |= interrupt_data->interrupts[i].index
- << pack_shift;
- }
- gasket_dev_write_64(gasket_dev, value,
- interrupt_data->interrupt_bar_index,
- interrupt_data->interrupts[i].reg);
- }
-}
-
/* See gasket_interrupt.h for description. */
void gasket_interrupt_cleanup(struct gasket_dev *gasket_dev)
{
@@ -489,82 +553,3 @@ int gasket_interrupt_clear_eventfd(
interrupt_data->eventfd_ctxs[interrupt] = NULL;
return 0;
}
-
-static ssize_t interrupt_sysfs_show(
- struct device *device, struct device_attribute *attr, char *buf)
-{
- int i, ret;
- ssize_t written = 0, total_written = 0;
- struct gasket_interrupt_data *interrupt_data;
- struct gasket_dev *gasket_dev;
- struct gasket_sysfs_attribute *gasket_attr;
- enum interrupt_sysfs_attribute_type sysfs_type;
-
- gasket_dev = gasket_sysfs_get_device_data(device);
- if (!gasket_dev) {
- dev_dbg(device, "No sysfs mapping found for device\n");
- return 0;
- }
-
- gasket_attr = gasket_sysfs_get_attr(device, attr);
- if (!gasket_attr) {
- dev_dbg(device, "No sysfs attr data found for device\n");
- gasket_sysfs_put_device_data(device, gasket_dev);
- return 0;
- }
-
- sysfs_type = (enum interrupt_sysfs_attribute_type)
- gasket_attr->data.attr_type;
- interrupt_data = gasket_dev->interrupt_data;
- switch (sysfs_type) {
- case ATTR_INTERRUPT_COUNTS:
- for (i = 0; i < interrupt_data->num_interrupts; ++i) {
- written =
- scnprintf(buf, PAGE_SIZE - total_written,
- "0x%02x: %ld\n", i,
- interrupt_data->interrupt_counts[i]);
- total_written += written;
- buf += written;
- }
- ret = total_written;
- break;
- default:
- dev_dbg(gasket_dev->dev, "Unknown attribute: %s\n",
- attr->attr.name);
- ret = 0;
- break;
- }
-
- gasket_sysfs_put_attr(device, gasket_attr);
- gasket_sysfs_put_device_data(device, gasket_dev);
- return ret;
-}
-
-static irqreturn_t gasket_msix_interrupt_handler(int irq, void *dev_id)
-{
- struct eventfd_ctx *ctx;
- struct gasket_interrupt_data *interrupt_data = dev_id;
- int interrupt = -1;
- int i;
-
- /* If this linear lookup is a problem, we can maintain a map/hash. */
- for (i = 0; i < interrupt_data->num_interrupts; i++) {
- if (interrupt_data->msix_entries[i].vector == irq) {
- interrupt = interrupt_data->msix_entries[i].entry;
- break;
- }
- }
- if (interrupt == -1) {
- pr_err("Received unknown irq %d\n", irq);
- return IRQ_HANDLED;
- }
- trace_gasket_interrupt_event(interrupt_data->name, interrupt);
-
- ctx = interrupt_data->eventfd_ctxs[interrupt];
- if (ctx)
- eventfd_signal(ctx, 1);
-
- ++(interrupt_data->interrupt_counts[interrupt]);
-
- return IRQ_HANDLED;
-}
--
2.18.0.345.g5c9ce644c3-goog
More information about the devel
mailing list