[PATCH 3/4] staging: mt7621-pci: Add spaces after commas in pci-mt7621.c

[Peter Vernia]

Adds spaces after commas in parameter lists in pci-mt7621.c

Signed-off-by: Peter Vernia <peter.vernia at gmail.com>
---
 drivers/staging/mt7621-pci/pci-mt7621.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index c7932ae..3c7978e 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -399,10 +399,10 @@ set_phy_for_ssc(void)
 		if (reg >= 6) {
 			printk("***** Xtal 25MHz *****\n");
 			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL	//Feedback clock select
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO	//DDS NCPO PCW (for host mode)
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD	//DDS SSC dither period control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA	//DDS SSC dither amplitude control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1	//DDS SSC dither amplitude control for initial
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c),  0, 31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO	//DDS NCPO PCW (for host mode)
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4),  0, 16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD	//DDS SSC dither period control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8),  0, 12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA	//DDS SSC dither amplitude control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16, 12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1	//DDS SSC dither amplitude control for initial
 		} else {
 			printk("***** Xtal 20MHz *****\n");
 		}
@@ -436,10 +436,10 @@ set_phy_for_ssc(void)
 		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV	//Pre-divider ratio (for host mode)
 		if (reg >= 6) {		// 25MHz Xtal
 			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL	//Feedback clock select
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO	//DDS NCPO PCW (for host mode)
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD	//DDS SSC dither period control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA	//DDS SSC dither amplitude control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1	//DDS SSC dither amplitude control for initial
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c),  0, 31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO	//DDS NCPO PCW (for host mode)
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4),  0, 16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD	//DDS SSC dither period control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8),  0, 12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA	//DDS SSC dither amplitude control
+			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16, 12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1	//DDS SSC dither amplitude control for initial
 		}
 	}
 	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV	//DDS clock inversion
-- 
2.7.4