[PATCH 8/8] staging: fsl-mc: Convert documentation to rst format

Bogdan Purcareata bogdan.purcareata at nxp.com
Tue Jan 16 13:19:10 UTC 2018


From: Ioana Radulescu <ruxandra.radulescu at nxp.com>

Update the doc file to comply with the rst format.

It's not integrated into the documentation build structure yet,
since it's still located in drivers/staging.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu at nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
---
 drivers/staging/fsl-mc/README.txt   | 387 ----------------------------------
 drivers/staging/fsl-mc/overview.rst | 404 ++++++++++++++++++++++++++++++++++++
 2 files changed, 404 insertions(+), 387 deletions(-)
 delete mode 100644 drivers/staging/fsl-mc/README.txt
 create mode 100644 drivers/staging/fsl-mc/overview.rst

diff --git a/drivers/staging/fsl-mc/README.txt b/drivers/staging/fsl-mc/README.txt
deleted file mode 100644
index 0ea5cd7..0000000
--- a/drivers/staging/fsl-mc/README.txt
+++ /dev/null
@@ -1,387 +0,0 @@
-Copyright (C) 2015 Freescale Semiconductor Inc.
-
-DPAA2 (Data Path Acceleration Architecture Gen2) Overview
----------------------------------------------------------
-
-This document provides an overview of the Freescale DPAA2 architecture
-and how it is integrated into the Linux kernel.
-
-Contents summary
-   -DPAA2 overview
-   -Overview of DPAA2 objects
-   -DPAA2 Linux driver architecture overview
-        -bus driver
-        -DPRC driver
-        -allocator
-        -DPIO driver
-        -Ethernet
-        -MAC
-
-Introduction
-------------
-
-DPAA2 is a hardware architecture designed for high-speeed network
-packet processing.  DPAA2 consists of sophisticated mechanisms for
-processing Ethernet packets, queue management, buffer management,
-autonomous L2 switching, virtual Ethernet bridging, and accelerator
-(e.g. crypto) sharing.
-
-A DPAA2 hardware component called the Management Complex (or MC) manages the
-DPAA2 hardware resources.  The MC provides an object-based abstraction for
-software drivers to use the DPAA2 hardware.
-
-The MC uses DPAA2 hardware resources such as queues, buffer pools, and
-network ports to create functional objects/devices such as network
-interfaces, an L2 switch, or accelerator instances.
-
-The MC provides memory-mapped I/O command interfaces (MC portals)
-which DPAA2 software drivers use to operate on DPAA2 objects.
-
-The diagram below shows an overview of the DPAA2 resource management
-architecture:
-
-         +--------------------------------------+
-         |                  OS                  |
-         |                        DPAA2 drivers |
-         |                             |        |
-         +-----------------------------|--------+
-                                       |
-                                       | (create,discover,connect
-                                       |  config,use,destroy)
-                                       |
-                         DPAA2         |
-         +------------------------| mc portal |-+
-         |                             |        |
-         |   +- - - - - - - - - - - - -V- - -+  |
-         |   |                               |  |
-         |   |   Management Complex (MC)     |  |
-         |   |                               |  |
-         |   +- - - - - - - - - - - - - - - -+  |
-         |                                      |
-         | Hardware                  Hardware   |
-         | Resources                 Objects    |
-         | ---------                 -------    |
-         | -queues                   -DPRC      |
-         | -buffer pools             -DPMCP     |
-         | -Eth MACs/ports           -DPIO      |
-         | -network interface        -DPNI      |
-         |  profiles                 -DPMAC     |
-         | -queue portals            -DPBP      |
-         | -MC portals                ...       |
-         |  ...                                 |
-         |                                      |
-         +--------------------------------------+
-
-The MC mediates operations such as create, discover,
-connect, configuration, and destroy.  Fast-path operations
-on data, such as packet transmit/receive, are not mediated by
-the MC and are done directly using memory mapped regions in
-DPIO objects.
-
-Overview of DPAA2 Objects
--------------------------
-The section provides a brief overview of some key DPAA2 objects.
-A simple scenario is described illustrating the objects involved
-in creating a network interfaces.
-
--DPRC (Datapath Resource Container)
-
-    A DPRC is a container object that holds all the other
-    types of DPAA2 objects.  In the example diagram below there
-    are 8 objects of 5 types (DPMCP, DPIO, DPBP, DPNI, and DPMAC)
-    in the container.
-
-    +---------------------------------------------------------+
-    | DPRC                                                    |
-    |                                                         |
-    |  +-------+  +-------+  +-------+  +-------+  +-------+  |
-    |  | DPMCP |  | DPIO  |  | DPBP  |  | DPNI  |  | DPMAC |  |
-    |  +-------+  +-------+  +-------+  +---+---+  +---+---+  |
-    |  | DPMCP |  | DPIO  |                                   |
-    |  +-------+  +-------+                                   |
-    |  | DPMCP |                                              |
-    |  +-------+                                              |
-    |                                                         |
-    +---------------------------------------------------------+
-
-    From the point of view of an OS, a DPRC behaves similar to a plug and
-    play bus, like PCI.  DPRC commands can be used to enumerate the contents
-    of the DPRC, discover the hardware objects present (including mappable
-    regions and interrupts).
-
-     DPRC.1 (bus)
-       |
-       +--+--------+-------+-------+-------+
-          |        |       |       |       |
-        DPMCP.1  DPIO.1  DPBP.1  DPNI.1  DPMAC.1
-        DPMCP.2  DPIO.2
-        DPMCP.3
-
-    Hardware objects can be created and destroyed dynamically, providing
-    the ability to hot plug/unplug objects in and out of the DPRC.
-
-    A DPRC has a mappable MMIO region (an MC portal) that can be used
-    to send MC commands.  It has an interrupt for status events (like
-    hotplug).
-
-    All objects in a container share the same hardware "isolation context".
-    This means that with respect to an IOMMU the isolation granularity
-    is at the DPRC (container) level, not at the individual object
-    level.
-
-    DPRCs can be defined statically and populated with objects
-    via a config file passed to the MC when firmware starts it.
-
--DPAA2 Objects for an Ethernet Network Interface
-
-    A typical Ethernet NIC is monolithic-- the NIC device contains TX/RX
-    queuing mechanisms, configuration mechanisms, buffer management,
-    physical ports, and interrupts.  DPAA2 uses a more granular approach
-    utilizing multiple hardware objects.  Each object provides specialized
-    functions. Groups of these objects are used by software to provide
-    Ethernet network interface functionality.  This approach provides
-    efficient use of finite hardware resources, flexibility, and
-    performance advantages.
-
-    The diagram below shows the objects needed for a simple
-    network interface configuration on a system with 2 CPUs.
-
-              +---+---+ +---+---+
-                 CPU0     CPU1
-              +---+---+ +---+---+
-                  |         |
-              +---+---+ +---+---+
-                 DPIO     DPIO
-              +---+---+ +---+---+
-                    \     /
-                     \   /
-                      \ /
-                   +---+---+
-                      DPNI  --- DPBP,DPMCP
-                   +---+---+
-                       |
-                       |
-                   +---+---+
-                     DPMAC
-                   +---+---+
-                       |
-                    port/PHY
-
-    Below the objects are described.  For each object a brief description
-    is provided along with a summary of the kinds of operations the object
-    supports and a summary of key resources of the object (MMIO regions
-    and IRQs).
-
-       -DPMAC (Datapath Ethernet MAC): represents an Ethernet MAC, a
-        hardware device that connects to an Ethernet PHY and allows
-        physical transmission and reception of Ethernet frames.
-           -MMIO regions: none
-           -IRQs: DPNI link change
-           -commands: set link up/down, link config, get stats,
-            IRQ config, enable, reset
-
-       -DPNI (Datapath Network Interface): contains TX/RX queues,
-        network interface configuration, and RX buffer pool configuration
-        mechanisms.  The TX/RX queues are in memory and are identified by
-        queue number.
-           -MMIO regions: none
-           -IRQs: link state
-           -commands: port config, offload config, queue config,
-            parse/classify config, IRQ config, enable, reset
-
-       -DPIO (Datapath I/O): provides interfaces to enqueue and dequeue
-        packets and do hardware buffer pool management operations.  The DPAA2
-        architecture separates the mechanism to access queues (the DPIO object)
-        from the queues themselves.  The DPIO provides an MMIO interface to
-        enqueue/dequeue packets.  To enqueue something a descriptor is written
-        to the DPIO MMIO region, which includes the target queue number.
-        There will typically be one DPIO assigned to each CPU.  This allows all
-        CPUs to simultaneously perform enqueue/dequeued operations.  DPIOs are
-        expected to be shared by different DPAA2 drivers.
-           -MMIO regions: queue operations, buffer management
-           -IRQs: data availability, congestion notification, buffer
-                  pool depletion
-           -commands: IRQ config, enable, reset
-
-       -DPBP (Datapath Buffer Pool): represents a hardware buffer
-        pool.
-           -MMIO regions: none
-           -IRQs: none
-           -commands: enable, reset
-
-       -DPMCP (Datapath MC Portal): provides an MC command portal.
-        Used by drivers to send commands to the MC to manage
-        objects.
-           -MMIO regions: MC command portal
-           -IRQs: command completion
-           -commands: IRQ config, enable, reset
-
-Object Connections
-------------------
-    Some objects have explicit relationships that must
-    be configured:
-
-       -DPNI <--> DPMAC
-       -DPNI <--> DPNI
-       -DPNI <--> L2-switch-port
-          A DPNI must be connected to something such as a DPMAC,
-          another DPNI, or L2 switch port.  The DPNI connection
-          is made via a DPRC command.
-
-              +-------+  +-------+
-              | DPNI  |  | DPMAC |
-              +---+---+  +---+---+
-                  |          |
-                  +==========+
-
-       -DPNI <--> DPBP
-          A network interface requires a 'buffer pool' (DPBP
-          object) which provides a list of pointers to memory
-          where received Ethernet data is to be copied.  The
-          Ethernet driver configures the DPBPs associated with
-          the network interface.
-
-Interrupts
-----------
-    All interrupts generated by DPAA2 objects are message
-    interrupts.  At the hardware level message interrupts
-    generated by devices will normally have 3 components--
-    1) a non-spoofable 'device-id' expressed on the hardware
-    bus, 2) an address, 3) a data value.
-
-    In the case of DPAA2 devices/objects, all objects in the
-    same container/DPRC share the same 'device-id'.
-    For ARM-based SoC this is the same as the stream ID.
-
-
-DPAA2 Linux Drivers Overview
-----------------------------
-
-This section provides an overview of the Linux kernel drivers for
-DPAA2-- 1) the bus driver and associated "DPAA2 infrastructure"
-drivers and 2) functional object drivers (such as Ethernet).
-
-As described previously, a DPRC is a container that holds the other
-types of DPAA2 objects.  It is functionally similar to a plug-and-play
-bus controller.
-
-Each object in the DPRC is a Linux "device" and is bound to a driver.
-The diagram below shows the Linux drivers involved in a networking
-scenario and the objects bound to each driver.  A brief description
-of each driver follows.
-
-                                             +------------+
-                                             | OS Network |
-                                             |   Stack    |
-                 +------------+              +------------+
-                 | Allocator  |. . . . . . . |  Ethernet  |
-                 |(DPMCP,DPBP)|              |   (DPNI)   |
-                 +-.----------+              +---+---+----+
-                  .          .                   ^   |
-                 .            .     <data avail, |   |<enqueue,
-                .              .     tx confirm> |   | dequeue>
-    +-------------+             .                |   |
-    | DPRC driver |              .           +---+---V----+     +---------+
-    |   (DPRC)    |               . . . . . .| DPIO driver|     |   MAC   |
-    +----------+--+                          |  (DPIO)    |     | (DPMAC) |
-               |                             +------+-----+     +-----+---+
-               |<dev add/remove>                    |                 |
-               |                                    |                 |
-          +----+--------------+                     |              +--+---+
-          |   MC-bus driver   |                     |              | PHY  |
-          |                   |                     |              |driver|
-          | /bus/fsl-mc       |                     |              +--+---+
-          +-------------------+                     |                 |
-                                                    |                 |
- ================================ HARDWARE =========|=================|======
-                                                  DPIO                |
-                                                    |                 |
-                                                  DPNI---DPBP         |
-                                                    |                 |
-                                                  DPMAC               |
-                                                    |                 |
-                                                   PHY ---------------+
- ===================================================|========================
-
-A brief description of each driver is provided below.
-
-    MC-bus driver
-    -------------
-    The MC-bus driver is a platform driver and is probed from a
-    node in the device tree (compatible "fsl,qoriq-mc") passed in by boot
-    firmware.  It is responsible for bootstrapping the DPAA2 kernel
-    infrastructure.
-    Key functions include:
-       -registering a new bus type named "fsl-mc" with the kernel,
-        and implementing bus call-backs (e.g. match/uevent/dev_groups)
-       -implementing APIs for DPAA2 driver registration and for device
-        add/remove
-       -creates an MSI IRQ domain
-       -doing a 'device add' to expose the 'root' DPRC, in turn triggering
-        a bind of the root DPRC to the DPRC driver
-    The binding for the MC-bus device-tree node can be consulted here:
-        Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
-    The sysfs bind/unbind interfaces for the MC-bus can be consulted here:
-        Documentation/ABI/testing/sysfs-bus-fsl-mc*
-
-    DPRC driver
-    -----------
-    The DPRC driver is bound to DPRC objects and does runtime management
-    of a bus instance.  It performs the initial bus scan of the DPRC
-    and handles interrupts for container events such as hot plug by
-    re-scanning the DPRC.
-
-    Allocator
-    ----------
-    Certain objects such as DPMCP and DPBP are generic and fungible,
-    and are intended to be used by other drivers.  For example,
-    the DPAA2 Ethernet driver needs:
-       -DPMCPs to send MC commands, to configure network interfaces
-       -DPBPs for network buffer pools
-
-    The allocator driver registers for these allocatable object types
-    and those objects are bound to the allocator when the bus is probed.
-    The allocator maintains a pool of objects that are available for
-    allocation by other DPAA2 drivers.
-
-    DPIO driver
-    -----------
-    The DPIO driver is bound to DPIO objects and provides services that allow
-    other drivers such as the Ethernet driver to enqueue and dequeue data for
-    their respective objects.
-    Key services include:
-        -data availability notifications
-        -hardware queuing operations (enqueue and dequeue of data)
-        -hardware buffer pool management
-
-    To transmit a packet the Ethernet driver puts data on a queue and
-    invokes a DPIO API.  For receive, the Ethernet driver registers
-    a data availability notification callback.  To dequeue a packet
-    a DPIO API is used.
-
-    There is typically one DPIO object per physical CPU for optimum
-    performance, allowing different CPUs to simultaneously enqueue
-    and dequeue data.
-
-    The DPIO driver operates on behalf of all DPAA2 drivers
-    active in the kernel--  Ethernet, crypto, compression,
-    etc.
-
-    Ethernet driver
-    ---------------
-    The Ethernet driver is bound to a DPNI and implements the kernel
-    interfaces needed to connect the DPAA2 network interface to
-    the network stack.
-
-    Each DPNI corresponds to a Linux network interface.
-
-    MAC driver
-    ----------
-    An Ethernet PHY is an off-chip, board specific component and is managed
-    by the appropriate PHY driver via an mdio bus.  The MAC driver
-    plays a role of being a proxy between the PHY driver and the
-    MC.  It does this proxy via the MC commands to a DPMAC object.
-    If the PHY driver signals a link change, the MAC driver notifies
-    the MC via a DPMAC command.  If a network interface is brought
-    up or down, the MC notifies the DPMAC driver via an interrupt and
-    the driver can take appropriate action.
diff --git a/drivers/staging/fsl-mc/overview.rst b/drivers/staging/fsl-mc/overview.rst
new file mode 100644
index 0000000..79fede4
--- /dev/null
+++ b/drivers/staging/fsl-mc/overview.rst
@@ -0,0 +1,404 @@
+.. include:: <isonum.txt>
+
+DPAA2 (Data Path Acceleration Architecture Gen2) Overview
+=========================================================
+
+:Copyright: |copy| 2015 Freescale Semiconductor Inc.
+:Copyright: |copy| 2018 NXP
+
+This document provides an overview of the Freescale DPAA2 architecture
+and how it is integrated into the Linux kernel.
+
+Introduction
+============
+
+DPAA2 is a hardware architecture designed for high-speeed network
+packet processing.  DPAA2 consists of sophisticated mechanisms for
+processing Ethernet packets, queue management, buffer management,
+autonomous L2 switching, virtual Ethernet bridging, and accelerator
+(e.g. crypto) sharing.
+
+A DPAA2 hardware component called the Management Complex (or MC) manages the
+DPAA2 hardware resources.  The MC provides an object-based abstraction for
+software drivers to use the DPAA2 hardware.
+The MC uses DPAA2 hardware resources such as queues, buffer pools, and
+network ports to create functional objects/devices such as network
+interfaces, an L2 switch, or accelerator instances.
+The MC provides memory-mapped I/O command interfaces (MC portals)
+which DPAA2 software drivers use to operate on DPAA2 objects.
+
+The diagram below shows an overview of the DPAA2 resource management
+architecture::
+
+	+--------------------------------------+
+	|                  OS                  |
+	|                        DPAA2 drivers |
+	|                             |        |
+	+-----------------------------|--------+
+	                              |
+	                              | (create,discover,connect
+	                              |  config,use,destroy)
+	                              |
+	                 DPAA2        |
+	+------------------------| mc portal |-+
+	|                             |        |
+	|   +- - - - - - - - - - - - -V- - -+  |
+	|   |                               |  |
+	|   |   Management Complex (MC)     |  |
+	|   |                               |  |
+	|   +- - - - - - - - - - - - - - - -+  |
+	|                                      |
+	| Hardware                  Hardware   |
+	| Resources                 Objects    |
+	| ---------                 -------    |
+	| -queues                   -DPRC      |
+	| -buffer pools             -DPMCP     |
+	| -Eth MACs/ports           -DPIO      |
+	| -network interface        -DPNI      |
+	|  profiles                 -DPMAC     |
+	| -queue portals            -DPBP      |
+	| -MC portals                ...       |
+	|  ...                                 |
+	|                                      |
+	+--------------------------------------+
+
+
+The MC mediates operations such as create, discover,
+connect, configuration, and destroy.  Fast-path operations
+on data, such as packet transmit/receive, are not mediated by
+the MC and are done directly using memory mapped regions in
+DPIO objects.
+
+Overview of DPAA2 Objects
+=========================
+
+The section provides a brief overview of some key DPAA2 objects.
+A simple scenario is described illustrating the objects involved
+in creating a network interfaces.
+
+DPRC (Datapath Resource Container)
+----------------------------------
+
+A DPRC is a container object that holds all the other
+types of DPAA2 objects.  In the example diagram below there
+are 8 objects of 5 types (DPMCP, DPIO, DPBP, DPNI, and DPMAC)
+in the container.
+
+::
+
+	+---------------------------------------------------------+
+	| DPRC                                                    |
+	|                                                         |
+	|  +-------+  +-------+  +-------+  +-------+  +-------+  |
+	|  | DPMCP |  | DPIO  |  | DPBP  |  | DPNI  |  | DPMAC |  |
+	|  +-------+  +-------+  +-------+  +---+---+  +---+---+  |
+	|  | DPMCP |  | DPIO  |                                   |
+	|  +-------+  +-------+                                   |
+	|  | DPMCP |                                              |
+	|  +-------+                                              |
+	|                                                         |
+	+---------------------------------------------------------+
+
+From the point of view of an OS, a DPRC behaves similar to a plug and
+play bus, like PCI.  DPRC commands can be used to enumerate the contents
+of the DPRC, discover the hardware objects present (including mappable
+regions and interrupts).
+
+::
+
+	DPRC.1 (bus)
+	   |
+	   +--+--------+-------+-------+-------+
+	      |        |       |       |       |
+	    DPMCP.1  DPIO.1  DPBP.1  DPNI.1  DPMAC.1
+	    DPMCP.2  DPIO.2
+	    DPMCP.3
+
+Hardware objects can be created and destroyed dynamically, providing
+the ability to hot plug/unplug objects in and out of the DPRC.
+
+A DPRC has a mappable MMIO region (an MC portal) that can be used
+to send MC commands.  It has an interrupt for status events (like
+hotplug).
+All objects in a container share the same hardware "isolation context".
+This means that with respect to an IOMMU the isolation granularity
+is at the DPRC (container) level, not at the individual object
+level.
+
+DPRCs can be defined statically and populated with objects
+via a config file passed to the MC when firmware starts it.
+
+DPAA2 Objects for an Ethernet Network Interface
+-----------------------------------------------
+
+A typical Ethernet NIC is monolithic-- the NIC device contains TX/RX
+queuing mechanisms, configuration mechanisms, buffer management,
+physical ports, and interrupts.  DPAA2 uses a more granular approach
+utilizing multiple hardware objects.  Each object provides specialized
+functions. Groups of these objects are used by software to provide
+Ethernet network interface functionality.  This approach provides
+efficient use of finite hardware resources, flexibility, and
+performance advantages.
+
+The diagram below shows the objects needed for a simple
+network interface configuration on a system with 2 CPUs.
+
+::
+
+	+---+---+ +---+---+
+	   CPU0     CPU1
+	+---+---+ +---+---+
+	    |         |
+	+---+---+ +---+---+
+	   DPIO     DPIO
+	+---+---+ +---+---+
+	    \     /
+	     \   /
+	      \ /
+	   +---+---+
+	      DPNI  --- DPBP,DPMCP
+	   +---+---+
+	       |
+	       |
+	   +---+---+
+	     DPMAC
+	   +---+---+
+	       |
+	   port/PHY
+
+Below the objects are described.  For each object a brief description
+is provided along with a summary of the kinds of operations the object
+supports and a summary of key resources of the object (MMIO regions
+and IRQs).
+
+DPMAC (Datapath Ethernet MAC)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Represents an Ethernet MAC, a hardware device that connects to an Ethernet
+PHY and allows physical transmission and reception of Ethernet frames.
+
+- MMIO regions: none
+- IRQs: DPNI link change
+- commands: set link up/down, link config, get stats,
+  IRQ config, enable, reset
+
+DPNI (Datapath Network Interface)
+Contains TX/RX queues, network interface configuration, and RX buffer pool
+configuration mechanisms.  The TX/RX queues are in memory and are identified
+by queue number.
+
+- MMIO regions: none
+- IRQs: link state
+- commands: port config, offload config, queue config,
+  parse/classify config, IRQ config, enable, reset
+
+DPIO (Datapath I/O)
+~~~~~~~~~~~~~~~~~~~
+Provides interfaces to enqueue and dequeue
+packets and do hardware buffer pool management operations.  The DPAA2
+architecture separates the mechanism to access queues (the DPIO object)
+from the queues themselves.  The DPIO provides an MMIO interface to
+enqueue/dequeue packets.  To enqueue something a descriptor is written
+to the DPIO MMIO region, which includes the target queue number.
+There will typically be one DPIO assigned to each CPU.  This allows all
+CPUs to simultaneously perform enqueue/dequeued operations.  DPIOs are
+expected to be shared by different DPAA2 drivers.
+
+- MMIO regions: queue operations, buffer management
+- IRQs: data availability, congestion notification, buffer
+  pool depletion
+- commands: IRQ config, enable, reset
+
+DPBP (Datapath Buffer Pool)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Represents a hardware buffer pool.
+
+- MMIO regions: none
+- IRQs: none
+- commands: enable, reset
+
+DPMCP (Datapath MC Portal)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+Provides an MC command portal.
+Used by drivers to send commands to the MC to manage
+objects.
+
+- MMIO regions: MC command portal
+- IRQs: command completion
+- commands: IRQ config, enable, reset
+
+Object Connections
+==================
+Some objects have explicit relationships that must
+be configured:
+
+- DPNI <--> DPMAC
+- DPNI <--> DPNI
+- DPNI <--> L2-switch-port
+
+    A DPNI must be connected to something such as a DPMAC,
+    another DPNI, or L2 switch port.  The DPNI connection
+    is made via a DPRC command.
+
+::
+
+              +-------+  +-------+
+              | DPNI  |  | DPMAC |
+              +---+---+  +---+---+
+                  |          |
+                  +==========+
+
+- DPNI <--> DPBP
+
+    A network interface requires a 'buffer pool' (DPBP
+    object) which provides a list of pointers to memory
+    where received Ethernet data is to be copied.  The
+    Ethernet driver configures the DPBPs associated with
+    the network interface.
+
+Interrupts
+==========
+All interrupts generated by DPAA2 objects are message
+interrupts.  At the hardware level message interrupts
+generated by devices will normally have 3 components--
+1) a non-spoofable 'device-id' expressed on the hardware
+bus, 2) an address, 3) a data value.
+
+In the case of DPAA2 devices/objects, all objects in the
+same container/DPRC share the same 'device-id'.
+For ARM-based SoC this is the same as the stream ID.
+
+
+DPAA2 Linux Drivers Overview
+============================
+
+This section provides an overview of the Linux kernel drivers for
+DPAA2-- 1) the bus driver and associated "DPAA2 infrastructure"
+drivers and 2) functional object drivers (such as Ethernet).
+
+As described previously, a DPRC is a container that holds the other
+types of DPAA2 objects.  It is functionally similar to a plug-and-play
+bus controller.
+Each object in the DPRC is a Linux "device" and is bound to a driver.
+The diagram below shows the Linux drivers involved in a networking
+scenario and the objects bound to each driver.  A brief description
+of each driver follows.
+
+::
+
+	                                     +------------+
+	                                     | OS Network |
+	                                     |   Stack    |
+	         +------------+              +------------+
+	         | Allocator  |. . . . . . . |  Ethernet  |
+	         |(DPMCP,DPBP)|              |   (DPNI)   |
+	         +-.----------+              +---+---+----+
+	          .          .                   ^   |
+	         .            .     <data avail, |   | <enqueue,
+	        .              .     tx confirm> |   | dequeue>
+	+-------------+         .                |   |
+	| DPRC driver |          .           +---+---V----+     +---------+
+	|   (DPRC)    |           . . . . . .| DPIO driver|     |   MAC   |
+	+----------+--+                      |  (DPIO)    |     | (DPMAC) |
+	           |                         +------+-----+     +-----+---+
+	           |<dev add/remove>                |                 |
+	           |                                |                 |
+	  +--------+----------+                     |              +--+---+
+	  |   MC-bus driver   |                     |              | PHY  |
+	  |                   |                     |              |driver|
+	  |   /bus/fsl-mc     |                     |              +--+---+
+	  +-------------------+                     |                 |
+	                                            |                 |
+	========================= HARDWARE =========|=================|======
+	                                          DPIO                |
+	                                            |                 |
+	                                          DPNI---DPBP         |
+	                                            |                 |
+	                                          DPMAC               |
+	                                            |                 |
+	                                           PHY ---------------+
+	============================================|========================
+
+A brief description of each driver is provided below.
+
+MC-bus driver
+-------------
+The MC-bus driver is a platform driver and is probed from a
+node in the device tree (compatible "fsl,qoriq-mc") passed in by boot
+firmware.  It is responsible for bootstrapping the DPAA2 kernel
+infrastructure.
+Key functions include:
+
+- registering a new bus type named "fsl-mc" with the kernel,
+  and implementing bus call-backs (e.g. match/uevent/dev_groups)
+- implementing APIs for DPAA2 driver registration and for device
+  add/remove
+- creates an MSI IRQ domain
+- doing a 'device add' to expose the 'root' DPRC, in turn triggering
+  a bind of the root DPRC to the DPRC driver
+
+The binding for the MC-bus device-tree node can be consulted at
+*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt*.
+The sysfs bind/unbind interfaces for the MC-bus can be consulted at
+*Documentation/ABI/testing/sysfs-bus-fsl-mc*.
+
+DPRC driver
+-----------
+The DPRC driver is bound to DPRC objects and does runtime management
+of a bus instance.  It performs the initial bus scan of the DPRC
+and handles interrupts for container events such as hot plug by
+re-scanning the DPRC.
+
+Allocator
+---------
+Certain objects such as DPMCP and DPBP are generic and fungible,
+and are intended to be used by other drivers.  For example,
+the DPAA2 Ethernet driver needs:
+
+- DPMCPs to send MC commands, to configure network interfaces
+- DPBPs for network buffer pools
+
+The allocator driver registers for these allocatable object types
+and those objects are bound to the allocator when the bus is probed.
+The allocator maintains a pool of objects that are available for
+allocation by other DPAA2 drivers.
+
+DPIO driver
+-----------
+The DPIO driver is bound to DPIO objects and provides services that allow
+other drivers such as the Ethernet driver to enqueue and dequeue data for
+their respective objects.
+Key services include:
+
+- data availability notifications
+- hardware queuing operations (enqueue and dequeue of data)
+- hardware buffer pool management
+
+To transmit a packet the Ethernet driver puts data on a queue and
+invokes a DPIO API.  For receive, the Ethernet driver registers
+a data availability notification callback.  To dequeue a packet
+a DPIO API is used.
+There is typically one DPIO object per physical CPU for optimum
+performance, allowing different CPUs to simultaneously enqueue
+and dequeue data.
+
+The DPIO driver operates on behalf of all DPAA2 drivers
+active in the kernel--  Ethernet, crypto, compression,
+etc.
+
+Ethernet driver
+---------------
+The Ethernet driver is bound to a DPNI and implements the kernel
+interfaces needed to connect the DPAA2 network interface to
+the network stack.
+Each DPNI corresponds to a Linux network interface.
+
+MAC driver
+----------
+An Ethernet PHY is an off-chip, board specific component and is managed
+by the appropriate PHY driver via an mdio bus.  The MAC driver
+plays a role of being a proxy between the PHY driver and the
+MC.  It does this proxy via the MC commands to a DPMAC object.
+If the PHY driver signals a link change, the MAC driver notifies
+the MC via a DPMAC command.  If a network interface is brought
+up or down, the MC notifies the DPMAC driver via an interrupt and
+the driver can take appropriate action.
-- 
2.7.4



More information about the devel mailing list