[PATCH v7 00/12] media: staging/imx7: add i.MX7 media driver
Rui Miguel Silva
rui.silva at linaro.org
Fri Aug 10 14:20:33 UTC 2018
Hi,
This series introduces the Media driver to work with the i.MX7 SoC. it uses the
already existing imx media core drivers but since the i.MX7, contrary to
i.MX5/6, do not have an IPU and because of that some changes in the imx media
core are made along this series to make it support that case.
This patches adds CSI and MIPI-CSI2 drivers for i.MX7, along with several
configurations changes for this to work as a capture subsystem. Some bugs are
also fixed along the line. And necessary documentation.
For a more detailed view of the capture paths, pads links in the i.MX7 please
take a look at the documentation in PATCH 14.
The system used to test and develop this was the Warp7 board with an OV2680
sensor, which output format is 10-bit bayer. So, only MIPI interface was
tested, a scenario with an parallel input would nice to have.
Bellow goes an example of the output of the pads and links and the output of
v4l2-compliance testing.
The v4l-utils version used is:
v4l2-compliance SHA : 90905c2e4b17d7595256f3824e2d30d19b0df1a1 from Aug 6th
The Media Driver fail some tests but this failures are coming from code out of
scope of this series (imx-capture), and some from the sensor OV2680
but that I think not related with the sensor driver but with the testing and
core.
The csi and mipi-csi entities pass all compliance tests.
Cheers,
Rui
v6->v7:
Myself:
- Clock patches removed from this version since they were already merged
- Rebuild and test with the latest v4l2-compliance
- Add patch to video-mux regarding bayer formats
- remove reference to dependent patch serie (was already merged)
Sakari Ailus:
- add port and endpoint explanantions
- fix some wording should -> shall
v5->v6:
Rob Herring:
- rename power-domain node name from: pgc-power-domain to power-domain
- change mux-control-cells to 0
- remove bus-width from mipi bindings and dts
- remove err... regarding clock names line
- remove clk-settle from example
- split mipi-csi2 and csi bindings per file
- add OF graph description to CSI
Philipp Zabel:
- rework group IDs and rename them with an _IPU_ prefix, this allowed to remove
the ipu_present flag need.
v4->v5:
Sakari Ailus:
- fix remove of the capture entries in dts bindings in the right patch
Stephen Boyd:
- Send all series to clk list
v3->v4:
Philipp Zabel:
- refactor initialization code from media device probe to be possible to used
from other modules
- Remove index of csi from all accurrencs (dts, code, documentation)
- Remove need for capture node for imx7
- fix pinctrl for ov2680
- add reviewed tag to add multiplexer controls patch
Fabio Estevam:
- remove always on from new regulator
Randy Dunlap:
- several text editing fixes in documentation
Myself:
- rebase on top of v4 of Steve series
- change CSI probe to initialize imx media device
- remove csi mux parallel endpoint from mux to avoid warning message
v2->v3:
Philipp Zabel:
- use of_match_device in imx-media-dev instead of of_device_match
- fix number of data lanes from 4 to 2
- change the clock definitions and use of mipi
- move hs-settle from endpoint
Rob Herring:
- fix phy-supply description
- add vendor properties
- fix examples indentations
Stephen Boyd: patch 3/14
- fix double sign-off
- add fixes tag
Dong Aisheng: patch 3/14
- fix double sign-off
- add Acked-by tag
Shawn Guo:
patch 4/14
- remove line breakage in parent redifiniton
- added Acked-by tag
- dropped CMA area increase and add more verbose information in case of
dma allocation failure
patch 9/14
- remove extra line between cells and reg masks
Myself:
- rework on frame end in csi
- add rxcount in csi driver
- add power supplies to ov2680 node and fix gpio polarity
v1->v2:
Dan Carpenter:
- fix return paths and codes;
- fix clk_frequency validation and return code;
- handle the csi remove (release resources that was missing)
- revert the logic arround the ipu_present flag
Philipp Zabel:
- drop patch that changed the rgb formats and address the pixel/bus format in
mipi_csis code.
MySelf:
- add patch that add ov2680 node to the warp7 dts, so the all data path is
complete.
- add linux-clk mailing list to the clock patches cc:
v4l2-compliance SHA: 90905c2e4b17d7595256f3824e2d30d19b0df1a1, 32 bits
Compliance test for device /dev/media0:
Media Driver Info:
Driver name : imx7-csi
Model : imx-media
Serial :
Bus info :
Media version : 4.18.0
Hardware revision: 0x00000000 (0)
Driver version : 4.18.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
Entity: 0x00000001 (Name: 'csi', Function: Video Interface Bridge)
Entity: 0x00000004 (Name: 'csi capture', Function: V4L2 I/O)
Entity: 0x0000000a (Name: 'csi_mux', Function: Video Muxer)
Entity: 0x0000000e (Name: 'imx7-mipi-csis.0', Function: Video Interface Bridge)
Entity: 0x00000011 (Name: 'ov2680 1-0036', Function: Camera Sensor)
Interface: 0x03000005 (Type: V4L Video, DevPath: /dev/video0)
Interface: 0x03000019 (Type: V4L Sub-Device, DevPath: /dev/v4l-subdev0)
Interface: 0x0300001b (Type: V4L Sub-Device, DevPath: /dev/v4l-subdev1)
Interface: 0x0300001d (Type: V4L Sub-Device, DevPath: /dev/v4l-subdev2)
Interface: 0x0300001f (Type: V4L Sub-Device, DevPath: /dev/v4l-subdev3)
Pad: 0x01000002 (0, csi, Sink)
Pad: 0x01000003 (1, csi, Source)
Pad: 0x01000007 (0, csi capture, Sink)
Pad: 0x0100000b (0, csi_mux, Sink)
Pad: 0x0100000c (1, csi_mux, Sink)
Pad: 0x0100000d (2, csi_mux, Source)
Pad: 0x0100000f (0, imx7-mipi-csis.0, Sink)
Pad: 0x01000010 (1, imx7-mipi-csis.0, Source)
Pad: 0x01000012 (0, ov2680 1-0036, Source)
Link: 0x02000006 (csi capture to interface /dev/video0)
Link: 0x02000008 (csi -> csi capture, Data, Enabled)
Link: 0x02000013 (imx7-mipi-csis.0 -> csi_mux, Data, Enabled)
Link: 0x02000015 (csi_mux -> csi, Data, Enabled)
Link: 0x02000017 (ov2680 1-0036 -> imx7-mipi-csis.0, Data, Enabled)
Link: 0x0200001a (csi to interface /dev/v4l-subdev0)
Link: 0x0200001c (csi_mux to interface /dev/v4l-subdev1)
Link: 0x0200001e (imx7-mipi-csis.0 to interface /dev/v4l-subdev2)
Link: 0x02000020 (ov2680 1-0036 to interface /dev/v4l-subdev3)
test MEDIA_IOC_G_TOPOLOGY: OK
Entities: 5 Interfaces: 5 Pads: 9 Links: 9
Entity: 0x00000001 (Name: 'csi', Type: Unknown V4L2 Sub-Device, DevPath: /dev/v4l-subdev0)
Entity: 0x00000004 (Name: 'csi capture', Type: V4L2 I/O, DevPath: /dev/video0)
Entity: 0x0000000a (Name: 'csi_mux', Type: Unknown V4L2 Sub-Device, DevPath: /dev/v4l-subdev1)
Entity: 0x0000000e (Name: 'imx7-mipi-csis.0', Type: Unknown V4L2 Sub-Device, DevPath: /dev/v4l-subdev2)
Entity: 0x00000011 (Name: 'ov2680 1-0036', Type: Camera Sensor, DevPath: /dev/v4l-subdev3)
test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
test MEDIA_IOC_SETUP_LINK: OK
--------------------------------------------------------------------------------
Compliance test for device /dev/video0:
Driver Info:
Driver name : imx-media-captu
Card type : imx-media-capture
Bus info : platform:csi
Driver version : 4.18.0
Capabilities : 0x84200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : imx7-csi
Model : imx-media
Serial :
Bus info :
Media version : 4.18.0
Hardware revision: 0x00000000 (0)
Driver version : 4.18.0
Interface Info:
ID : 0x03000005
Type : V4L Video
Entity Info:
ID : 0x00000004 (4)
Name : csi capture
Function : V4L2 I/O
Pad 0x01000007 : 0: Sink
Link 0x02000008: from remote pad 0x1000003 of entity 'csi': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
fail: v4l2-test-input-output.cpp(420): G_INPUT not supported for a capture device
test VIDIOC_G/S/ENUMINPUT: FAIL
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
info: checking v4l2_queryctrl of control 'User Controls' (0x00980001)
info: checking v4l2_queryctrl of control 'Exposure' (0x00980911)
info: checking v4l2_queryctrl of control 'Gain, Automatic' (0x00980912)
info: checking v4l2_queryctrl of control 'Gain' (0x00980913)
info: checking v4l2_queryctrl of control 'Horizontal Flip' (0x00980914)
info: checking v4l2_queryctrl of control 'Vertical Flip' (0x00980915)
info: checking v4l2_queryctrl of control 'Camera Controls' (0x009a0001)
info: checking v4l2_queryctrl of control 'Auto Exposure' (0x009a0901)
info: checking v4l2_queryctrl of control 'Image Processing Controls' (0x009f0001)
info: checking v4l2_queryctrl of control 'Test Pattern' (0x009f0903)
info: checking v4l2_queryctrl of control 'Exposure' (0x00980911)
info: checking v4l2_queryctrl of control 'Gain, Automatic' (0x00980912)
info: checking v4l2_queryctrl of control 'Gain' (0x00980913)
info: checking v4l2_queryctrl of control 'Horizontal Flip' (0x00980914)
info: checking v4l2_queryctrl of control 'Vertical Flip' (0x00980915)
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
info: checking control 'User Controls' (0x00980001)
info: checking control 'Exposure' (0x00980911)
info: checking control 'Gain, Automatic' (0x00980912)
info: checking control 'Gain' (0x00980913)
info: checking control 'Horizontal Flip' (0x00980914)
info: checking control 'Vertical Flip' (0x00980915)
info: checking control 'Camera Controls' (0x009a0001)
info: checking control 'Auto Exposure' (0x009a0901)
info: checking control 'Image Processing Controls' (0x009f0001)
info: checking control 'Test Pattern' (0x009f0903)
test VIDIOC_G/S_CTRL: OK
info: checking extended control 'User Controls' (0x00980001)
info: checking extended control 'Exposure' (0x00980911)
info: checking extended control 'Gain, Automatic' (0x00980912)
info: checking extended control 'Gain' (0x00980913)
info: checking extended control 'Horizontal Flip' (0x00980914)
info: checking extended control 'Vertical Flip' (0x00980915)
info: checking extended control 'Camera Controls' (0x009a0001)
info: checking extended control 'Auto Exposure' (0x009a0901)
info: checking extended control 'Image Processing Controls' (0x009f0001)
info: checking extended control 'Test Pattern' (0x009f0903)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
info: checking control event 'User Controls' (0x00980001)
fail: v4l2-test-controls.cpp(796): subscribe event for control 'User Controls' failed
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 10 Private Controls: 0
Format ioctls:
info: found 1 formats for buftype 1
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
info: test buftype Video Capture
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
--------------------------------------------------------------------------------
Compliance test for device /dev/v4l-subdev0:
Media Driver Info:
Driver name : imx7-csi
Model : imx-media
Serial :
Bus info :
Media version : 4.18.0
Hardware revision: 0x00000000 (0)
Driver version : 4.18.0
Interface Info:
ID : 0x03000019
Type : V4L Sub-Device
Entity Info:
ID : 0x00000001 (1)
Name : csi
Function : Video Interface Bridge
Pad 0x01000002 : 0: Sink
Link 0x02000015: from remote pad 0x100000d of entity 'csi_mux': Data, Enabled
Pad 0x01000003 : 1: Source
Link 0x02000008: to remote pad 0x1000007 of entity 'csi capture': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev0 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
--------------------------------------------------------------------------------
Compliance test for device /dev/v4l-subdev1:
Media Driver Info:
Driver name : imx7-csi
Model : imx-media
Serial :
Bus info :
Media version : 4.18.0
Hardware revision: 0x00000000 (0)
Driver version : 4.18.0
Interface Info:
ID : 0x0300001b
Type : V4L Sub-Device
Entity Info:
ID : 0x0000000a (10)
Name : csi_mux
Function : Video Muxer
Pad 0x0100000b : 0: Sink
Pad 0x0100000c : 1: Sink
Link 0x02000013: from remote pad 0x1000010 of entity 'imx7-mipi-csis.0': Data, Enabled
Pad 0x0100000d : 2: Source
Link 0x02000015: to remote pad 0x1000002 of entity 'csi': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev1 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
fail: v4l2-test-subdevs.cpp(370): s_fmt.format.width != fmt.format.width
test Try VIDIOC_SUBDEV_G/S_FMT: FAIL
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
--------------------------------------------------------------------------------
Compliance test for device /dev/v4l-subdev2:
Media Driver Info:
Driver name : imx7-csi
Model : imx-media
Serial :
Bus info :
Media version : 4.18.0
Hardware revision: 0x00000000 (0)
Driver version : 4.18.0
Interface Info:
ID : 0x0300001d
Type : V4L Sub-Device
Entity Info:
ID : 0x0000000e (14)
Name : imx7-mipi-csis.0
Function : Video Interface Bridge
Pad 0x0100000f : 0: Sink
Link 0x02000017: from remote pad 0x1000012 of entity 'ov2680 1-0036': Data, Enabled
Pad 0x01000010 : 1: Source
Link 0x02000013: to remote pad 0x100000c of entity 'csi_mux': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev2 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
--------------------------------------------------------------------------------
Compliance test for device /dev/v4l-subdev3:
Media Driver Info:
Driver name : imx7-csi
Model : imx-media
Serial :
Bus info :
Media version : 4.18.0
Hardware revision: 0x00000000 (0)
Driver version : 4.18.0
Interface Info:
ID : 0x0300001f
Type : V4L Sub-Device
Entity Info:
ID : 0x00000011 (17)
Name : ov2680 1-0036
Function : Camera Sensor
Pad 0x01000012 : 0: Source
Link 0x02000017: to remote pad 0x100000f of entity 'imx7-mipi-csis.0': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev3 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Source Pad 0):
fail: v4l2-test-subdevs.cpp(57): node->enum_frame_interval_pad >= 0
fail: v4l2-test-subdevs.cpp(183): ret && ret != ENOTTY
fail: v4l2-test-subdevs.cpp(248): ret && ret != ENOTTY
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
fail: v4l2-test-subdevs.cpp(311): fmt.width == 0 || fmt.width == ~0U
fail: v4l2-test-subdevs.cpp(356): checkMBusFrameFmt(node, fmt.format)
test Try VIDIOC_SUBDEV_G/S_FMT: FAIL
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
test Active VIDIOC_SUBDEV_G/S_FMT: OK
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK
Control ioctls:
info: checking v4l2_queryctrl of control 'User Controls' (0x00980001)
info: checking v4l2_queryctrl of control 'Exposure' (0x00980911)
info: checking v4l2_queryctrl of control 'Gain, Automatic' (0x00980912)
info: checking v4l2_queryctrl of control 'Gain' (0x00980913)
info: checking v4l2_queryctrl of control 'Horizontal Flip' (0x00980914)
info: checking v4l2_queryctrl of control 'Vertical Flip' (0x00980915)
info: checking v4l2_queryctrl of control 'Camera Controls' (0x009a0001)
info: checking v4l2_queryctrl of control 'Auto Exposure' (0x009a0901)
info: checking v4l2_queryctrl of control 'Image Processing Controls' (0x009f0001)
info: checking v4l2_queryctrl of control 'Test Pattern' (0x009f0903)
info: checking v4l2_queryctrl of control 'Exposure' (0x00980911)
info: checking v4l2_queryctrl of control 'Gain, Automatic' (0x00980912)
info: checking v4l2_queryctrl of control 'Gain' (0x00980913)
info: checking v4l2_queryctrl of control 'Horizontal Flip' (0x00980914)
info: checking v4l2_queryctrl of control 'Vertical Flip' (0x00980915)
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
info: checking control 'User Controls' (0x00980001)
info: checking control 'Exposure' (0x00980911)
info: checking control 'Gain, Automatic' (0x00980912)
info: checking control 'Gain' (0x00980913)
info: checking control 'Horizontal Flip' (0x00980914)
info: checking control 'Vertical Flip' (0x00980915)
info: checking control 'Camera Controls' (0x009a0001)
info: checking control 'Auto Exposure' (0x009a0901)
info: checking control 'Image Processing Controls' (0x009f0001)
info: checking control 'Test Pattern' (0x009f0903)
test VIDIOC_G/S_CTRL: OK
info: checking extended control 'User Controls' (0x00980001)
info: checking extended control 'Exposure' (0x00980911)
info: checking extended control 'Gain, Automatic' (0x00980912)
info: checking extended control 'Gain' (0x00980913)
info: checking extended control 'Horizontal Flip' (0x00980914)
info: checking extended control 'Vertical Flip' (0x00980915)
info: checking extended control 'Camera Controls' (0x009a0001)
info: checking extended control 'Auto Exposure' (0x009a0901)
info: checking extended control 'Image Processing Controls' (0x009f0001)
info: checking extended control 'Test Pattern' (0x009f0903)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
info: checking control event 'User Controls' (0x00980001)
fail: v4l2-test-controls.cpp(796): subscribe event for control 'User Controls' failed
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 10 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
Total: 267, Succeeded: 261, Failed: 6, Warnings: 0
Rui Miguel Silva (12):
media: staging/imx: refactor imx media device probe
media: staging/imx: rearrange group id to take in account IPU
media: staging/imx7: add imx7 CSI subdev driver
media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7
media: dt-bindings: add bindings for i.MX7 media driver
ARM: dts: imx7s: add mipi phy power domain
ARM: dts: imx7s: add multiplexer controls
ARM: dts: imx7: Add video mux, csi and mipi_csi and connections
ARM: dts: imx7s-warp: add ov2680 sensor node
media: imx7.rst: add documentation for i.MX7 media driver
media: staging/imx: add i.MX7 entries to TODO file
media: video-mux: add bayer formats
.../devicetree/bindings/media/imx7-csi.txt | 45 +
.../bindings/media/imx7-mipi-csi2.txt | 90 ++
Documentation/media/v4l-drivers/imx7.rst | 157 ++
Documentation/media/v4l-drivers/index.rst | 1 +
arch/arm/boot/dts/imx7s-warp.dts | 95 ++
arch/arm/boot/dts/imx7s.dtsi | 43 +-
drivers/media/platform/video-mux.c | 20 +
drivers/staging/media/imx/Kconfig | 9 +-
drivers/staging/media/imx/Makefile | 4 +
drivers/staging/media/imx/TODO | 9 +
drivers/staging/media/imx/imx-ic-common.c | 6 +-
drivers/staging/media/imx/imx-ic-prp.c | 14 +-
drivers/staging/media/imx/imx-media-csi.c | 6 +-
drivers/staging/media/imx/imx-media-dev.c | 110 +-
.../staging/media/imx/imx-media-internal-sd.c | 20 +-
drivers/staging/media/imx/imx-media-of.c | 6 +-
drivers/staging/media/imx/imx-media-utils.c | 12 +-
drivers/staging/media/imx/imx-media.h | 38 +-
drivers/staging/media/imx/imx7-media-csi.c | 1352 +++++++++++++++++
drivers/staging/media/imx/imx7-mipi-csis.c | 1134 ++++++++++++++
20 files changed, 3049 insertions(+), 122 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/imx7-csi.txt
create mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
create mode 100644 Documentation/media/v4l-drivers/imx7.rst
create mode 100644 drivers/staging/media/imx/imx7-media-csi.c
create mode 100644 drivers/staging/media/imx/imx7-mipi-csis.c
--
2.18.0
More information about the devel
mailing list