[PATCH v6 00/13] media: staging/imx7: add i.MX7 media driver

Hans Verkuil hverkuil at xs4all.nl
Fri Aug 3 11:00:50 UTC 2018


On 08/02/18 18:45, Rui Miguel Silva wrote:
> Hi Hans,
> On Thu 02 Aug 2018 at 13:37, Hans Verkuil wrote:
>> Hi Rui,
>>
>> On 05/22/18 16:52, Rui Miguel Silva wrote:
>>> Hi,
>>> This series introduces the Media driver to work with the i.MX7 
>>> SoC. it uses the
>>> already existing imx media core drivers but since the i.MX7, 
>>> contrary to
>>> i.MX5/6, do not have an IPU and because of that some changes in 
>>> the imx media
>>> core are made along this series to make it support that case.
>>>
>>> This patches adds CSI and MIPI-CSI2 drivers for i.MX7, along 
>>> with several
>>> configurations changes for this to work as a capture subsystem. 
>>> Some bugs are
>>> also fixed along the line. And necessary documentation.
>>>
>>> For a more detailed view of the capture paths, pads links in 
>>> the i.MX7 please
>>> take a look at the documentation in PATCH 14.
>>>
>>> The system used to test and develop this was the Warp7 board 
>>> with an OV2680
>>> sensor, which output format is 10-bit bayer. So, only MIPI 
>>> interface was
>>> tested, a scenario with an parallel input would nice to have.
>>>
>>> *Important note*, this code depends on Steve Longerbeam series 
>>> [0]:
>>> [PATCH v4 00/13] media: imx: Switch to subdev notifiers
>>> which the merging status is not clear to me, but the changes in 
>>> there make
>>> senses to this series
>>>
>>> Bellow goes an example of the output of the pads and links and 
>>> the output of
>>> v4l2-compliance testing.
>>>
>>> The v4l-utils version used is:
>>> v4l2-compliance SHA   : 
>>> 47d43b130dc6e9e0edc900759fb37649208371e4 from Apr 4th.
>>>
>>> The Media Driver fail some tests but this failures are coming 
>>> from code out of
>>> scope of this series (video-mux, imx-capture), and some from 
>>> the sensor OV2680
>>> but that I think not related with the sensor driver but with 
>>> the testing and
>>> core.
>>>
>>> The csi and mipi-csi entities pass all compliance tests.
>>>
>>> Cheers,
>>>     Rui
>>>
>>> [0]: 
>>> https://www.mail-archive.com/linux-media@vger.kernel.org/msg131186.html
>>
>> This patch series was delayed quite a bit since the patch series 
>> above
>> it depends on is still not merged.
>>
>> But the v6 version of that series will be merged once the 4.20 
>> cycle opens:
>> https://www.mail-archive.com/linux-media@vger.kernel.org/msg133391.html
> 
> Good news.
> 
>>
>> Sakari has a branch with that series on top of the latest 
>> media_tree master:
>> https://git.linuxtv.org/sailus/media_tree.git/log/?h=v4l2-fwnode
>>
>> Can you rebase this imx7 series on top of that? And test it 
>> again with the
>> *latest* v4l2-compliance? (I've added new checks recently, so 
>> you need to
>> update this utility)
>>
>> Please post the output of the v4l2-compliance test (after fixing 
>> any issues
>> it raises of course), either as a reply to this post or in the 
>> cover letter
>> of a v7 version of this series if you had to make changes.
> 
> Sure, I will rebase on top of Sakari tree and will update the 
> compliance
> tests and run them again.

Oops, forgot to mention: you will likely need to update the
include/linux/media.h header:

Look for MEDIA_V2_ENTITY_HAS_FLAGS and MEDIA_V2_PAD_HAS_INDEX and
change 19 to 18 in those defines. This is added for kernel 4.19, but
since in our master tree the kernel version is still 4.18 the v4l2-compliance
utility thinks these features are not present when in fact they are.

Without this change (temporarily since this will automatically be fixed
after the 4.19 merge window closes) v4l2-compliance will fail with an error.

Regards,

	Hans


More information about the devel mailing list