[PATCH] staging: atomisp: add a driver for ov5648 camera sensor

Sakari Ailus sakari.ailus at iki.fi
Mon Sep 11 14:55:29 UTC 2017


Hi Devid,

Please see my comments below.

Andy: please look for "INT5648".

On Sun, Sep 10, 2017 at 02:23:07PM +0200, Devid Antonio Floni wrote:
> The ov5680 5-megapixel camera sensor from OmniVision supports up to 2592x1944
> resolution and MIPI CSI-2 interface. Output format is raw sRGB/Bayer with
> 10 bits per colour (SGRBG10_1X10).
> 
> This patch is a port of ov5680 driver from following
> 01org/ProductionKernelQuilts patches:
> - 0004-ov2680-ov5648-Fork-lift-source-from-CTS.patch
> - 0005-ov2680-ov5648-gminification.patch
> - 0006-ov5648-Focus-support.patch
> - 0007-Fix-resolution-issues-on-rear-camera.patch
> - 0008-ov2680-ov5648-Enabled-the-set_exposure-functions.patch
> - 0010-IRDA-cameras-mode-list-cleanup-unification.patch
> - 0012-ov5648-Add-1296x972-binned-mode.patch
> - 0014-ov5648-Adapt-to-Atomisp2-Gmin-VCM-framework.patch
> - 0015-dw9714-Gmin-Atomisp-specific-VCM-driver.patch
> - 0017-ov5648-Fix-deadlock-on-I2C-error.patch
> - 0018-gc2155-Fix-deadlock-on-error.patch
> - 0019-ov5648-Add-1280x960-binned-mode.patch
> - 0020-ov5648-Make-1280x960-as-default-video-resolution.patch
> - 0021-MALATA-Fix-testCameraToSurfaceTextureMetadata-CTS.patch
> - 0023-OV5648-Added-5MP-video-resolution.patch
> 
> New changes introduced during the port:
> - Rename entity types to entity functions
> - Replace v4l2_subdev_fh by v4l2_subdev_pad_config
> - Make use of media_bus_format enum
> - Rename media_entity_init function to media_entity_pads_init
> - Replace try_mbus_fmt by set_fmt
> - Replace s_mbus_fmt by set_fmt
> - Replace g_mbus_fmt by get_fmt
> - Use s_ctrl/g_volatile_ctrl instead of ctrl core ops
> - Update gmin platform API path
> - Update and constify acpi_device_id
> - Fix some checkpatch errors and warnings
> - Remove FSF's mailing address from the sample GPL notice
> 
> I was not able to properly test this patch on my Lenovo Miix 310 due to other
> issues with atomisp, the output is the same as ov2680 driver which is very similar.

Has this been somehow tested?

> 
> Signed-off-by: Devid Antonio Floni <d.filoni at ubuntu.com>
> ---
>  drivers/staging/media/atomisp/i2c/Kconfig  |   11 +
>  drivers/staging/media/atomisp/i2c/Makefile |    1 +
>  drivers/staging/media/atomisp/i2c/ov5648.c | 1867 ++++++++++++++++++++++++++++
>  drivers/staging/media/atomisp/i2c/ov5648.h |  835 +++++++++++++
>  4 files changed, 2714 insertions(+)
>  create mode 100644 drivers/staging/media/atomisp/i2c/ov5648.c
>  create mode 100644 drivers/staging/media/atomisp/i2c/ov5648.h
> 
> diff --git a/drivers/staging/media/atomisp/i2c/Kconfig b/drivers/staging/media/atomisp/i2c/Kconfig
> index b80d29d..8ed2cf4 100644
> --- a/drivers/staging/media/atomisp/i2c/Kconfig
> +++ b/drivers/staging/media/atomisp/i2c/Kconfig
> @@ -89,6 +89,17 @@ config VIDEO_OV2680
>  
>           It currently only works with the atomisp driver.
>  
> +config VIDEO_OV5648

It'd be good to have ATOMISP in the option as well (the others don't have
it, I think I'll submit a patch) so that these won't collide with the real
V4L2 subdev drivers. E.g. VIDEO_ATOMISP_OV5648.

> +       tristate "Omnivision OV5648 sensor support"
> +       depends on I2C && VIDEO_V4L2
> +       ---help---
> +         This is a Video4Linux2 sensor-level driver for the Omnivision
> +         OV5648 raw camera.
> +
> +         ov5648 is a 5M raw sensor.
> +
> +         It currently only works with the atomisp driver.
> +

While it's nice to see a new sensor driver, it'd be even better if the
atomisp driver was modified to work with V4L2 sub-device sensor drivers
e.g. under drivers/media/i2c.

I'm not saying no to adding this specific driver as such though, this is
staging... I wonder what others think.

>  #
>  # Kconfig for flash drivers
>  #
> diff --git a/drivers/staging/media/atomisp/i2c/Makefile b/drivers/staging/media/atomisp/i2c/Makefile
> index be13fab..26195d7 100644
> --- a/drivers/staging/media/atomisp/i2c/Makefile
> +++ b/drivers/staging/media/atomisp/i2c/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_VIDEO_MT9M114)    += mt9m114.o
>  obj-$(CONFIG_VIDEO_GC2235)     += gc2235.o
>  obj-$(CONFIG_VIDEO_OV2722)     += ov2722.o
>  obj-$(CONFIG_VIDEO_OV2680)     += ov2680.o
> +obj-$(CONFIG_VIDEO_OV5648)     += ov5648.o
>  obj-$(CONFIG_VIDEO_GC0310)     += gc0310.o
>  
>  obj-$(CONFIG_VIDEO_MSRLIST_HELPER) += libmsrlisthelper.o
> diff --git a/drivers/staging/media/atomisp/i2c/ov5648.c b/drivers/staging/media/atomisp/i2c/ov5648.c
> new file mode 100644
> index 0000000..4815a19
> --- /dev/null
> +++ b/drivers/staging/media/atomisp/i2c/ov5648.c
> @@ -0,0 +1,1867 @@
> +/*
> + * Support for OmniVision OV5648 5M camera sensor.
> + * Based on OmniVision OV2722 driver.
> + *
> + * Copyright (c) 2013 Intel Corporation. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/mm.h>
> +#include <linux/string.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/kmod.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/moduleparam.h>
> +#include <media/v4l2-device.h>
> +#include <linux/io.h>
> +#include "../include/linux/atomisp_gmin_platform.h"
> +
> +#include "ov5648.h"
> +
> +#define OV5648_DEBUG_EN 0
> +
> +#define H_FLIP_DEFAULT 1
> +#define V_FLIP_DEFAULT 0
> +static int h_flag = H_FLIP_DEFAULT;
> +static int v_flag = V_FLIP_DEFAULT;
> +
> +/* i2c read/write stuff */
> +static int ov5648_read_reg(struct i2c_client *client,
> +			   u16 data_length, u16 reg, u16 *val)
> +{
> +	int err;
> +	struct i2c_msg msg[2];
> +	unsigned char data[6];
> +
> +	if (!client->adapter) {
> +		dev_err(&client->dev, "%s error, no client->adapter\n",
> +			__func__);
> +		return -ENODEV;
> +	}
> +
> +	if (data_length != OV5648_8BIT && data_length != OV5648_16BIT
> +					&& data_length != OV5648_32BIT) {
> +		dev_err(&client->dev, "%s error, invalid data length\n",
> +			__func__);
> +		return -EINVAL;
> +	}
> +
> +	memset(msg, 0, sizeof(msg));
> +
> +	msg[0].addr = client->addr;
> +	msg[0].flags = 0;
> +	msg[0].len = I2C_MSG_LENGTH;
> +	msg[0].buf = data;
> +
> +	/* high byte goes out first */
> +	data[0] = (u8)(reg >> 8);
> +	data[1] = (u8)(reg & 0xff);
> +
> +	msg[1].addr = client->addr;
> +	msg[1].len = data_length;
> +	msg[1].flags = I2C_M_RD;
> +	msg[1].buf = data;
> +
> +	err = i2c_transfer(client->adapter, msg, 2);
> +	if (err != 2) {
> +		if (err >= 0)
> +			err = -EIO;
> +		dev_err(&client->dev,
> +			"read from offset 0x%x error %d", reg, err);
> +		return err;
> +	}
> +
> +	*val = 0;
> +	/* high byte comes first */
> +	if (data_length == OV5648_8BIT)
> +		*val = (u8)data[0];
> +	else if (data_length == OV5648_16BIT)
> +		*val = be16_to_cpu(*(u16 *)&data[0]);
> +	else
> +		*val = be32_to_cpu(*(u32 *)&data[0]);
> +
> +	return 0;
> +}
> +
> +static int ov5648_i2c_write(struct i2c_client *client, u16 len, u8 *data)
> +{
> +	struct i2c_msg msg;
> +	const int num_msg = 1;
> +	int ret;
> +
> +	msg.addr = client->addr;
> +	msg.flags = 0;
> +	msg.len = len;
> +	msg.buf = data;
> +	ret = i2c_transfer(client->adapter, &msg, 1);
> +
> +	return ret == num_msg ? 0 : -EIO;
> +}
> +
> +static int ov5648_write_reg(struct i2c_client *client, u16 data_length,
> +							u16 reg, u16 val)
> +{
> +	int ret;
> +	unsigned char data[4] = {0};
> +	u16 *wreg = (u16 *)data;
> +	const u16 len = data_length + sizeof(u16); /* 16-bit address + data */
> +
> +	if (data_length != OV5648_8BIT && data_length != OV5648_16BIT) {
> +		dev_err(&client->dev,
> +			"%s error, invalid data_length\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	/* high byte goes out first */
> +	*wreg = cpu_to_be16(reg);
> +
> +	if (data_length == OV5648_8BIT) {
> +		data[2] = (u8)(val);
> +	} else {
> +		/* OV5648_16BIT */
> +		u16 *wdata = (u16 *)&data[2];
> +		*wdata = cpu_to_be16(val);
> +	}
> +
> +	ret = ov5648_i2c_write(client, len, data);
> +	if (ret)
> +		dev_err(&client->dev,
> +			"write error: wrote 0x%x to offset 0x%x error %d",
> +			val, reg, ret);
> +
> +	return ret;
> +}
> +
> +/*
> + * ov5648_write_reg_array - Initializes a list of OV5648 registers
> + * @client: i2c driver client structure
> + * @reglist: list of registers to be written
> + *
> + * This function initializes a list of registers. When consecutive addresses
> + * are found in a row on the list, this function creates a buffer and sends
> + * consecutive data in a single i2c_transfer().
> + *
> + * __ov5648_flush_reg_array, __ov5648_buf_reg_array() and
> + * __ov5648_write_reg_is_consecutive() are internal functions to
> + * ov5648_write_reg_array_fast() and should be not used anywhere else.
> + *
> + */
> +
> +static int __ov5648_flush_reg_array(struct i2c_client *client,
> +				    struct ov5648_write_ctrl *ctrl)
> +{
> +	u16 size;
> +
> +	if (ctrl->index == 0)
> +		return 0;
> +
> +	size = sizeof(u16) + ctrl->index; /* 16-bit address + data */
> +	ctrl->buffer.addr = cpu_to_be16(ctrl->buffer.addr);
> +	ctrl->index = 0;
> +
> +	return ov5648_i2c_write(client, size, (u8 *)&ctrl->buffer);
> +}
> +
> +static int __ov5648_buf_reg_array(struct i2c_client *client,
> +				  struct ov5648_write_ctrl *ctrl,
> +				  const struct ov5648_reg *next)
> +{
> +	int size;
> +	u16 *data16;
> +
> +	switch (next->type) {
> +	case OV5648_8BIT:
> +		size = 1;
> +		ctrl->buffer.data[ctrl->index] = (u8)next->val;
> +		break;
> +	case OV5648_16BIT:
> +		size = 2;
> +		data16 = (u16 *)&ctrl->buffer.data[ctrl->index];
> +		*data16 = cpu_to_be16((u16)next->val);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	/* When first item is added, we need to store its starting address */
> +	if (ctrl->index == 0)
> +		ctrl->buffer.addr = next->reg;
> +
> +	ctrl->index += size;
> +
> +	/*
> +	 * Buffer cannot guarantee free space for u32? Better flush it to avoid
> +	 * possible lack of memory for next item.
> +	 */
> +	if (ctrl->index + sizeof(u16) >= OV5648_MAX_WRITE_BUF_SIZE)
> +		return __ov5648_flush_reg_array(client, ctrl);
> +
> +	return 0;
> +}
> +
> +static int __ov5648_write_reg_is_consecutive(struct i2c_client *client,
> +					     struct ov5648_write_ctrl *ctrl,
> +					     const struct ov5648_reg *next)
> +{
> +	if (ctrl->index == 0)
> +		return 1;
> +
> +	return ctrl->buffer.addr + ctrl->index == next->reg;
> +}
> +
> +static int ov5648_write_reg_array(struct i2c_client *client,
> +				  const struct ov5648_reg *reglist)
> +{
> +	const struct ov5648_reg *next = reglist;
> +	struct ov5648_write_ctrl ctrl;
> +	int err;
> +
> +	ctrl.index = 0;
> +	for (; next->type != OV5648_TOK_TERM; next++) {
> +		switch (next->type & OV5648_TOK_MASK) {
> +		case OV5648_TOK_DELAY:
> +			err = __ov5648_flush_reg_array(client, &ctrl);
> +			if (err)
> +				return err;
> +			msleep(next->val);
> +			break;
> +		default:
> +			/*
> +			 * If next address is not consecutive, data needs to be
> +			 * flushed before proceed.
> +			 */
> +			if (!__ov5648_write_reg_is_consecutive(client, &ctrl,
> +								next)) {
> +				err = __ov5648_flush_reg_array(client, &ctrl);
> +			if (err)
> +				return err;
> +			}
> +			err = __ov5648_buf_reg_array(client, &ctrl, next);
> +			if (err) {
> +				dev_err(&client->dev, "%s: write error, aborted\n",
> +					 __func__);
> +				return err;
> +			}
> +			break;
> +		}
> +	}
> +
> +	return __ov5648_flush_reg_array(client, &ctrl);
> +}
> +static int ov5648_g_focal(struct v4l2_subdev *sd, s32 *val)
> +{
> +	*val = (OV5648_FOCAL_LENGTH_NUM << 16) | OV5648_FOCAL_LENGTH_DEM;
> +	return 0;
> +}
> +
> +static int ov5648_g_fnumber(struct v4l2_subdev *sd, s32 *val)
> +{
> +	/*const f number for imx*/
> +	*val = (OV5648_F_NUMBER_DEFAULT_NUM << 16) | OV5648_F_NUMBER_DEM;
> +	return 0;
> +}
> +
> +static int ov5648_g_fnumber_range(struct v4l2_subdev *sd, s32 *val)
> +{
> +	*val = (OV5648_F_NUMBER_DEFAULT_NUM << 24) |
> +		(OV5648_F_NUMBER_DEM << 16) |
> +		(OV5648_F_NUMBER_DEFAULT_NUM << 8) | OV5648_F_NUMBER_DEM;
> +	return 0;
> +}
> +
> +static int ov5648_g_bin_factor_x(struct v4l2_subdev *sd, s32 *val)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +
> +	*val = ov5648_res[dev->fmt_idx].bin_factor_x;
> +
> +	return 0;
> +}
> +
> +static int ov5648_g_bin_factor_y(struct v4l2_subdev *sd, s32 *val)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +
> +	*val = ov5648_res[dev->fmt_idx].bin_factor_y;
> +
> +	return 0;
> +}
> +
> +static int ov5648_get_intg_factor(struct i2c_client *client,
> +				struct camera_mipi_info *info,
> +				const struct ov5648_resolution *res)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct atomisp_sensor_mode_data *buf = &info->data;
> +	unsigned int pix_clk_freq_hz;
> +	u16 reg_val;
> +	int ret;
> +
> +	if (!info)
> +		return -EINVAL;
> +
> +	/* pixel clock */
> +	pix_clk_freq_hz = res->pix_clk_freq * 1000000;
> +
> +	dev->vt_pix_clk_freq_mhz = pix_clk_freq_hz;
> +	buf->vt_pix_clk_freq_mhz = pix_clk_freq_hz;
> +
> +	/* get integration time */
> +	buf->coarse_integration_time_min = OV5648_COARSE_INTG_TIME_MIN;
> +	buf->coarse_integration_time_max_margin =
> +		OV5648_COARSE_INTG_TIME_MAX_MARGIN;
> +
> +	buf->fine_integration_time_min = OV5648_FINE_INTG_TIME_MIN;
> +	buf->fine_integration_time_max_margin =
> +		OV5648_FINE_INTG_TIME_MAX_MARGIN;
> +
> +	buf->fine_integration_time_def = OV5648_FINE_INTG_TIME_MIN;
> +	buf->frame_length_lines = res->lines_per_frame;
> +	buf->line_length_pck = res->pixels_per_line;
> +	buf->read_mode = res->bin_mode;
> +
> +	/* get the cropping and output resolution to ISP for this mode. */
> +	ret =  ov5648_read_reg(client, OV5648_16BIT,
> +		OV5648_HORIZONTAL_START_H, &reg_val);
> +	if (ret)
> +		return ret;
> +	buf->crop_horizontal_start = reg_val;
> +
> +	ret =  ov5648_read_reg(client, OV5648_16BIT,
> +		OV5648_VERTICAL_START_H, &reg_val);
> +	if (ret)
> +		return ret;
> +	buf->crop_vertical_start = reg_val;
> +
> +	ret = ov5648_read_reg(client, OV5648_16BIT,
> +		OV5648_HORIZONTAL_END_H, &reg_val);
> +	if (ret)
> +		return ret;
> +	buf->crop_horizontal_end = reg_val;
> +
> +	ret = ov5648_read_reg(client, OV5648_16BIT,
> +		OV5648_VERTICAL_END_H, &reg_val);
> +	if (ret)
> +		return ret;
> +	buf->crop_vertical_end = reg_val;
> +
> +	ret = ov5648_read_reg(client, OV5648_16BIT,
> +		OV5648_HORIZONTAL_OUTPUT_SIZE_H, &reg_val);
> +	if (ret)
> +		return ret;
> +	buf->output_width = reg_val;
> +
> +	ret = ov5648_read_reg(client, OV5648_16BIT,
> +		OV5648_VERTICAL_OUTPUT_SIZE_H, &reg_val);
> +	if (ret)
> +		return ret;
> +	buf->output_height = reg_val;
> +
> +	buf->binning_factor_x = res->bin_factor_x ?
> +		res->bin_factor_x : 1;
> +	buf->binning_factor_y = res->bin_factor_y ?
> +		res->bin_factor_y : 1;
> +	return 0;
> +}
> +
> +static long __ov5648_set_exposure(struct v4l2_subdev *sd, int coarse_itg,
> +				 int gain, int digitgain)
> +
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	u16 vts, hts;
> +	int ret, exp_val, vts_val;
> +	int temp;
> +
> +	if (dev->run_mode == CI_MODE_VIDEO)
> +		ov5648_res = ov5648_res_video;
> +	else if (dev->run_mode == CI_MODE_STILL_CAPTURE)
> +		ov5648_res = ov5648_res_still;
> +	else
> +		ov5648_res = ov5648_res_preview;
> +
> +
> +	hts = ov5648_res[dev->fmt_idx].pixels_per_line;
> +	vts = ov5648_res[dev->fmt_idx].lines_per_frame;
> +
> +	/* group hold */
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_GROUP_ACCESS, 0x00);
> +	if (ret)
> +		return ret;
> +
> +	/* Increase the VTS to match exposure + 4 */
> +	if (coarse_itg + OV5648_INTEGRATION_TIME_MARGIN > vts)
> +		vts_val = coarse_itg + OV5648_INTEGRATION_TIME_MARGIN;
> +	else
> +		vts_val = vts;
> +	{
> +		ret = ov5648_write_reg(client, OV5648_8BIT,
> +			OV5648_TIMING_VTS_H, (vts_val >> 8) & 0xFF);
> +		if (ret)
> +			return ret;
> +		ret = ov5648_write_reg(client, OV5648_8BIT,
> +			OV5648_TIMING_VTS_L, vts_val & 0xFF);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* set exposure */
> +	/* Lower four bit should be 0*/
> +	exp_val = coarse_itg << 4;
> +
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_EXPOSURE_L, exp_val & 0xFF);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_EXPOSURE_M, (exp_val >> 8) & 0xFF);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_EXPOSURE_H, (exp_val >> 16) & 0x0F);
> +	if (ret)
> +		return ret;
> +
> +	/* Digital gain */
> +	if (digitgain != dev->pre_digitgain) {
> +		dev->pre_digitgain = digitgain;
> +		temp = digitgain*(dev->current_otp.R_gain)>>10;
> +		if (temp >= 0x400) {
> +			ret = ov5648_write_reg(client, OV5648_16BIT,
> +				OV5648_MWB_RED_GAIN_H, temp);
> +			if (ret)
> +				return ret;
> +		}
> +
> +		temp = digitgain*(dev->current_otp.G_gain)>>10;
> +		if (temp >= 0x400) {
> +			ret = ov5648_write_reg(client, OV5648_16BIT,
> +				OV5648_MWB_GREEN_GAIN_H, temp);
> +			if (ret)
> +				return ret;
> +		}
> +
> +		temp = digitgain*(dev->current_otp.B_gain)>>10;
> +		if (temp >= 0x400) {
> +			ret = ov5648_write_reg(client, OV5648_16BIT,
> +				OV5648_MWB_BLUE_GAIN_H, temp);
> +			if (ret)
> +				return ret;
> +		}
> +	}
> +
> +	/* Analog gain */
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_AGC_L, gain & 0xff);
> +	if (ret)
> +		return ret;
> +
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_AGC_H, (gain >> 8) & 0xff);
> +	if (ret)
> +		return ret;
> +
> +	/* End group */
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_GROUP_ACCESS, 0x10);
> +	if (ret)
> +		return ret;
> +
> +	/* Delay launch group */
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_GROUP_ACCESS, 0xa0);
> +	if (ret)
> +		return ret;
> +
> +	return ret;
> +}
> +
> +static int ov5648_set_exposure(struct v4l2_subdev *sd, int exposure,
> +	int gain, int digitgain)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	int ret;
> +
> +	mutex_lock(&dev->input_lock);
> +	ret = __ov5648_set_exposure(sd, exposure, gain, digitgain);
> +	mutex_unlock(&dev->input_lock);
> +
> +	return ret;
> +}
> +
> +static long ov5648_s_exposure(struct v4l2_subdev *sd,
> +			       struct atomisp_exposure *exposure)
> +{
> +	int exp = exposure->integration_time[0];
> +	int gain = exposure->gain[0];
> +	int digitgain = exposure->gain[1];
> +
> +	/* we should not accept the invalid value below. */
> +	if (gain == 0) {
> +		struct i2c_client *client = v4l2_get_subdevdata(sd);
> +		v4l2_err(client, "%s: invalid value\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	// EXPOSURE CONTROL DISABLED FOR INITIAL CHECKIN, TUNING DOESN'T WORK
> +	return ov5648_set_exposure(sd, exp, gain, digitgain);
> +}
> +
> +static long ov5648_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
> +{
> +
> +	switch (cmd) {
> +	case ATOMISP_IOC_S_EXPOSURE:
> +		return ov5648_s_exposure(sd, arg);
> +	default:
> +		return -EINVAL;
> +	}
> +	return 0;
> +}
> +
> +/* This returns the exposure time being used. This should only be used
> +   for filling in EXIF data, not for actual image processing. */
> +static int ov5648_q_exposure(struct v4l2_subdev *sd, s32 *value)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	u16 reg_v, reg_v2;
> +	int ret;
> +
> +	/* get exposure */
> +	ret = ov5648_read_reg(client, OV5648_8BIT,
> +					OV5648_EXPOSURE_L,
> +					&reg_v);
> +	if (ret)
> +		goto err;
> +
> +	ret = ov5648_read_reg(client, OV5648_8BIT,
> +					OV5648_EXPOSURE_M,
> +					&reg_v2);
> +	if (ret)
> +		goto err;
> +
> +	reg_v += reg_v2 << 8;
> +	ret = ov5648_read_reg(client, OV5648_8BIT,
> +					OV5648_EXPOSURE_H,
> +					&reg_v2);
> +	if (ret)
> +		goto err;
> +
> +	*value = reg_v + (((u32)reg_v2 << 16));
> +err:
> +	return ret;
> +}
> +
> +static int ov5648_vcm_power_up(struct v4l2_subdev *sd)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct camera_sensor_platform_data *pdata = dev->platform_data;
> +	struct camera_vcm_control *vcm;
> +
> +	if (!dev->vcm_driver)
> +		if (pdata && pdata->get_vcm_ctrl)
> +			dev->vcm_driver =
> +				pdata->get_vcm_ctrl(&dev->sd,
> +						dev->camera_module);
> +
> +	vcm = dev->vcm_driver;
> +	if (vcm && vcm->ops && vcm->ops->power_up)
> +		return vcm->ops->power_up(sd, vcm);
> +
> +	return 0;
> +}
> +
> +static int ov5648_vcm_power_down(struct v4l2_subdev *sd)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct camera_vcm_control *vcm = dev->vcm_driver;
> +
> +	if (vcm && vcm->ops && vcm->ops->power_down)
> +		return vcm->ops->power_down(sd, vcm);
> +
> +	return 0;
> +}
> +
> +static int ov5648_v_flip(struct v4l2_subdev *sd, s32 value)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret;
> +	u16 val;
> +
> +	dev_dbg(&client->dev, "@%s: value:%d\n", __func__, value);
> +	ret = ov5648_read_reg(client, OV5648_8BIT, OV5648_VFLIP_REG, &val);
> +	if (ret)
> +		return ret;
> +	if (value) {
> +		val |= OV5648_VFLIP_VALUE;
> +	} else {
> +		val &= ~OV5648_VFLIP_VALUE;
> +	}
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +			OV5648_VFLIP_REG, val);
> +	if (ret)
> +		return ret;
> +	return ret;
> +}
> +
> +static int ov5648_h_flip(struct v4l2_subdev *sd, s32 value)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret;
> +	u16 val;
> +	dev_dbg(&client->dev, "@%s: value:%d\n", __func__, value);
> +
> +	ret = ov5648_read_reg(client, OV5648_8BIT, OV5648_HFLIP_REG, &val);
> +	if (ret)
> +		return ret;
> +	if (value) {
> +		val |= OV5648_HFLIP_VALUE;
> +	} else {
> +		val &= ~OV5648_HFLIP_VALUE;
> +	}
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +			OV5648_HFLIP_REG, val);
> +	if (ret)
> +		return ret;
> +	return ret;
> +}
> +
> +static int ov5648_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct ov5648_device *dev =
> +	    container_of(ctrl->handler, struct ov5648_device, ctrl_handler);
> +	struct i2c_client *client = v4l2_get_subdevdata(&dev->sd);
> +	int ret = 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_VFLIP:
> +		dev_dbg(&client->dev, "%s: CID_VFLIP:%d.\n",
> +			__func__, ctrl->val);
> +		ret = ov5648_v_flip(&dev->sd, ctrl->val);
> +		break;
> +	case V4L2_CID_HFLIP:
> +		dev_dbg(&client->dev, "%s: CID_HFLIP:%d.\n",
> +			__func__, ctrl->val);
> +		ret = ov5648_h_flip(&dev->sd, ctrl->val);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +	}
> +	return ret;
> +}
> +
> +static int ov5648_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct ov5648_device *dev =
> +	    container_of(ctrl->handler, struct ov5648_device, ctrl_handler);

Indentation.

> +	int ret = 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_EXPOSURE_ABSOLUTE:
> +		ret = ov5648_q_exposure(&dev->sd, &ctrl->val);
> +		break;
> +	case V4L2_CID_FOCAL_ABSOLUTE:
> +		ret = ov5648_g_focal(&dev->sd, &ctrl->val);
> +		break;
> +	case V4L2_CID_FNUMBER_ABSOLUTE:
> +		ret = ov5648_g_fnumber(&dev->sd, &ctrl->val);
> +		break;
> +	case V4L2_CID_FNUMBER_RANGE:
> +		ret = ov5648_g_fnumber_range(&dev->sd, &ctrl->val);
> +		break;
> +	case V4L2_CID_BIN_FACTOR_HORZ:
> +		ret = ov5648_g_bin_factor_x(&dev->sd, &ctrl->val);
> +		break;
> +	case V4L2_CID_BIN_FACTOR_VERT:
> +		ret = ov5648_g_bin_factor_y(&dev->sd, &ctrl->val);
> +		break;

Could you rely on the control framework instead? I presume the values are
only programmed by the user / the driver and not read from sensor
registers.

> +	default:
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ctrl_ops = {
> +	.s_ctrl = ov5648_s_ctrl,
> +	.g_volatile_ctrl = ov5648_g_volatile_ctrl
> +};
> +
> +struct v4l2_ctrl_config ov5648_controls[] = {
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_EXPOSURE_ABSOLUTE,
> +	 .type = V4L2_CTRL_TYPE_INTEGER,
> +	 .name = "exposure",
> +	 .min = 0x0,
> +	 .max = 0xffff,
> +	 .step = 0x01,
> +	 .def = 0x00,
> +	 .flags = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_FOCAL_ABSOLUTE,
> +	 .type = V4L2_CTRL_TYPE_INTEGER,
> +	 .name = "focal length",
> +	 .min = OV5648_FOCAL_LENGTH_DEFAULT,
> +	 .max = OV5648_FOCAL_LENGTH_DEFAULT,
> +	 .step = 0x01,
> +	 .def = OV5648_FOCAL_LENGTH_DEFAULT,
> +	 .flags = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_FNUMBER_ABSOLUTE,
> +	 .type = V4L2_CTRL_TYPE_INTEGER,
> +	 .name = "f-number",
> +	 .min = OV5648_F_NUMBER_DEFAULT,
> +	 .max = OV5648_F_NUMBER_DEFAULT,
> +	 .step = 0x01,
> +	 .def = OV5648_F_NUMBER_DEFAULT,
> +	 .flags = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_FNUMBER_RANGE,
> +	 .type = V4L2_CTRL_TYPE_INTEGER,
> +	 .name = "f-number range",
> +	 .min = OV5648_F_NUMBER_RANGE,
> +	 .max =  OV5648_F_NUMBER_RANGE,
> +	 .step = 0x01,
> +	 .def = OV5648_F_NUMBER_RANGE,
> +	 .flags = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_BIN_FACTOR_HORZ,
> +	 .type = V4L2_CTRL_TYPE_INTEGER,
> +	 .name = "horizontal binning factor",
> +	 .min = 0,
> +	 .max = OV5648_BIN_FACTOR_MAX,
> +	 .step = 1,
> +	 .def = 0,
> +	 .flags = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_BIN_FACTOR_VERT,
> +	 .type = V4L2_CTRL_TYPE_INTEGER,
> +	 .name = "vertical binning factor",
> +	 .min = 0,
> +	 .max = OV5648_BIN_FACTOR_MAX,
> +	 .step = 1,
> +	 .def = 0,
> +	 .flags = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_VFLIP,
> +	 .type = V4L2_CTRL_TYPE_BOOLEAN,
> +	 .name = "Flip",
> +	 .min = 0,
> +	 .max = 1,
> +	 .step = 1,
> +	 .def = 0,
> +	},
> +	{
> +	 .ops = &ctrl_ops,
> +	 .id = V4L2_CID_HFLIP,
> +	 .type = V4L2_CTRL_TYPE_BOOLEAN,
> +	 .name = "Mirror",
> +	 .min = 0,
> +	 .max = 1,
> +	 .step = 1,
> +	 .def = 0,
> +	},
> +};
> +
> +static int ov5648_init(struct v4l2_subdev *sd)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	mutex_lock(&dev->input_lock);
> +
> +	/* restore settings */
> +	ov5648_res = ov5648_res_preview;
> +	N_RES = N_RES_PREVIEW;
> +
> +	ret = ov5648_write_reg_array(client, ov5648_global_settings);
> +	if (ret) {
> +		dev_err(&client->dev, "ov5648 write global settings err.\n");
> +		mutex_unlock(&dev->input_lock);
> +		return ret;
> +	}
> +
> +	mutex_unlock(&dev->input_lock);
> +
> +	return 0;
> +}
> +
> +#if 1
> +/*
> + *Camera driver need to load AWB calibration data
> + *stored in OTP and write to gain registers after
> + *initialization of register settings.
> + * index: index of otp group. (1, 2, 3)
> + * return: 0, group index is empty
> + *		1, group index has invalid data
> + *		2, group index has valid data
> + */
> +static int check_otp(struct i2c_client *client, int index)
> +{
> +	int i;
> +	u16 flag = 0, rg = 0, bg = 0;
> +	if (index == 1) {
> +		/* read otp --Bank 0 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d05, &flag);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d07, &rg);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d08, &bg);
> +	} else if (index == 2) {
> +		/* read otp --Bank 0 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d0e, &flag);
> +
> +		/* read otp --Bank 1 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d00, &rg);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d01, &bg);
> +	} else if (index == 3) {
> +		/* read otp --Bank 1 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d07, &flag);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d09, &rg);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d0a, &bg);
> +	}
> +
> +	flag = flag & 0x80;
> +
> +	/* clear otp buffer */
> +	for (i = 0; i < 16; i++)
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d00 + i, 0x00);
> +
> +	if (flag)
> +		return 1;
> +	else {
> +		if (rg == 0 && bg == 0)
> +			return 0;
> +		else
> +			return 2;
> +	}
> +
> +}
> +
> +/* index: index of otp group. (1, 2, 3)
> + * return: 0,
> + */
> +static int read_otp(struct i2c_client *client,
> +	    int index, struct otp_struct *otp_ptr)
> +{
> +	int i;
> +	u16 temp;
> +	/* read otp into buffer */
> +	if (index == 1) {
> +		/* read otp --Bank 0 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d05, &((*otp_ptr).module_integrator_id));
> +		(*otp_ptr).module_integrator_id =
> +			(*otp_ptr).module_integrator_id & 0x7f;
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d06, &((*otp_ptr).lens_id));
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d0b, &temp);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d07, &((*otp_ptr).rg_ratio));
> +		(*otp_ptr).rg_ratio =
> +			((*otp_ptr).rg_ratio<<2) + ((temp>>6) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d08, &((*otp_ptr).bg_ratio));
> +		(*otp_ptr).bg_ratio =
> +			((*otp_ptr).bg_ratio<<2) + ((temp>>4) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0c, &((*otp_ptr).light_rg));
> +		(*otp_ptr).light_rg =
> +			((*otp_ptr).light_rg<<2) + ((temp>>2) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0d, &((*otp_ptr).light_bg));
> +		(*otp_ptr).light_bg =
> +			((*otp_ptr).light_bg<<2) + (temp & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d09, &((*otp_ptr).user_data[0]));
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0a, &((*otp_ptr).user_data[1]));
> +	} else if (index == 2) {
> +		/* read otp --Bank 0 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x00);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x0f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0e, &((*otp_ptr).module_integrator_id));
> +		(*otp_ptr).module_integrator_id =
> +			(*otp_ptr).module_integrator_id & 0x7f;
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0f, &((*otp_ptr).lens_id));
> +		/* read otp --Bank 1 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d04, &temp);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d00, &((*otp_ptr).rg_ratio));
> +		(*otp_ptr).rg_ratio =
> +			((*otp_ptr).rg_ratio<<2) + ((temp>>6) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d01, &((*otp_ptr).bg_ratio));
> +		(*otp_ptr).bg_ratio =
> +			((*otp_ptr).bg_ratio<<2) + ((temp>>4) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d05, &((*otp_ptr).light_rg));
> +		(*otp_ptr).light_rg =
> +			((*otp_ptr).light_rg<<2) + ((temp>>2) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d06, &((*otp_ptr).light_bg));
> +		(*otp_ptr).light_bg =
> +			((*otp_ptr).light_bg<<2) + (temp & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d02, &((*otp_ptr).user_data[0]));
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d03, &((*otp_ptr).user_data[1]));
> +	} else if (index == 3) {
> +		/* read otp --Bank 1 */
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d84, 0xc0);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d85, 0x10);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d86, 0x1f);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d81, 0x01);
> +		mdelay(5);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d07, &((*otp_ptr).module_integrator_id));
> +		(*otp_ptr).module_integrator_id =
> +			(*otp_ptr).module_integrator_id & 0x7f;
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d08, &((*otp_ptr).lens_id));
> +		ov5648_read_reg(client, OV5648_8BIT, 0x3d0d, &temp);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d09, &((*otp_ptr).rg_ratio));
> +		(*otp_ptr).rg_ratio =
> +			((*otp_ptr).rg_ratio<<2) + ((temp>>6) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0a, &((*otp_ptr).bg_ratio));
> +		(*otp_ptr).bg_ratio =
> +			((*otp_ptr).bg_ratio<<2) + ((temp>>4) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0e, &((*otp_ptr).light_rg));
> +		(*otp_ptr).light_rg =
> +			((*otp_ptr).light_rg<<2) + ((temp>>2) & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0f, &((*otp_ptr).light_bg));
> +		(*otp_ptr).light_bg =
> +			((*otp_ptr).light_bg<<2) + (temp & 0x03);
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0b, &((*otp_ptr).user_data[0]));
> +		ov5648_read_reg(client, OV5648_8BIT,
> +			0x3d0c, &((*otp_ptr).user_data[1]));
> +	}
> +	/* clear otp buffer */
> +	for (i = 0; i < 16; i++)
> +		ov5648_write_reg(client, OV5648_8BIT, 0x3d00 + i, 0x00);
> +
> +	return 0;
> +}
> +/* R_gain, sensor red gain of AWB, 0x400 =1
> + * G_gain, sensor green gain of AWB, 0x400 =1
> + * B_gain, sensor blue gain of AWB, 0x400 =1
> + * return 0;
> + */
> +static int update_awb_gain(struct v4l2_subdev *sd)
> +{
> +
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	int R_gain = dev->current_otp.R_gain;
> +	int G_gain = dev->current_otp.G_gain;
> +	int B_gain = dev->current_otp.B_gain;
> +	if (R_gain > 0x400) {
> +		ov5648_write_reg(client, OV5648_8BIT, 0x5186, R_gain>>8);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x5187, R_gain & 0x00ff);
> +	}
> +	if (G_gain > 0x400) {
> +		ov5648_write_reg(client, OV5648_8BIT, 0x5188, G_gain>>8);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x5189, G_gain & 0x00ff);
> +	}
> +	if (B_gain > 0x400) {
> +		ov5648_write_reg(client, OV5648_8BIT, 0x518a, B_gain>>8);
> +		ov5648_write_reg(client, OV5648_8BIT, 0x518b, B_gain & 0x00ff);
> +	}
> +	#ifdef OV5648_DEBUG_EN
> +	dev_dbg(&client->dev, "_ov5648_: %s : rgain:%x ggain:%x bgain:%x\n", __func__, R_gain, G_gain, B_gain);
> +	#endif
> +	return 0;
> +}
> +
> +/* call this function after OV5648 initialization
> + * return: 0 update success
> + *		1, no OTP
> + */
> +static int update_otp(struct v4l2_subdev *sd)
> +{
> +	struct otp_struct current_otp;
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int i, ret;
> +	int otp_index;
> +	u16 temp;
> +	int R_gain, G_gain, B_gain, G_gain_R, G_gain_B;
> +	u16 rg = 1, bg = 1;
> +
> +	//otp valid after mipi on and sw stream on
> +	ov5648_write_reg(client, OV5648_8BIT, OV5648_SW_STREAM, OV5648_START_STREAMING);
> +
> +	/* R/G and B/G of current camera module is read out from sensor OTP
> +	 * check first OTP with valid data
> +	 */
> +	for (i = 1; i <= 3; i++) {
> +		temp = check_otp(client, i);
> +		if (temp == 2) {
> +			otp_index = i;
> +			break;
> +		}
> +	}
> +	if (i > 3) {
> +		printk(KERN_INFO"@%s: no valid wb otp data\n", __func__);
> +		/* no valid wb OTP data */
> +		return 1;
> +	}
> +	read_otp(client, otp_index, &current_otp);
> +	if (current_otp.light_rg == 0) {
> +		/* no light source information in OTP */
> +		rg = current_otp.rg_ratio;
> +	} else {
> +		/* light source information found in OTP */
> +		rg = current_otp.rg_ratio * (current_otp.light_rg + 512) / 1024;
> +	}
> +	if (current_otp.light_bg == 0) {
> +		/* no light source information in OTP */
> +		bg = current_otp.bg_ratio;
> +	} else {
> +		/* light source information found in OTP */
> +		bg = current_otp.bg_ratio * (current_otp.light_bg + 512) / 1024;
> +	}
> +	#ifdef OV5648_DEBUG_EN
> +	dev_dbg(&client->dev, "_ov5648_: %s : rg:%x bg:%x\n", __func__, rg, bg);
> +	#endif
> +	if (rg == 0)
> +		rg = 1;
> +	if (bg == 0)
> +		bg = 1;
> +	/*calculate G gain
> +	 *0x400 = 1x gain
> +	 */
> +	if (bg < BG_Ratio_Typical) {
> +		if (rg < RG_Ratio_Typical) {
> +			/* current_otp.bg_ratio < BG_Ratio_typical &&
> +			 * current_otp.rg_ratio < RG_Ratio_typical
> +			 */
> +			G_gain = 0x400;
> +			B_gain = 0x400 * BG_Ratio_Typical / bg;
> +			R_gain = 0x400 * RG_Ratio_Typical / rg;
> +		} else {
> +			/* current_otp.bg_ratio < BG_Ratio_typical &&
> +			 * current_otp.rg_ratio >= RG_Ratio_typical
> +			 */
> +			R_gain = 0x400;
> +			G_gain = 0x400 * rg / RG_Ratio_Typical;
> +			B_gain = G_gain * BG_Ratio_Typical / bg;
> +		}
> +	} else {
> +		if (rg < RG_Ratio_Typical) {
> +			/* current_otp.bg_ratio >= BG_Ratio_typical &&
> +			 * current_otp.rg_ratio < RG_Ratio_typical
> +			 */
> +			B_gain = 0x400;
> +			G_gain = 0x400 * bg / BG_Ratio_Typical;
> +			R_gain = G_gain * RG_Ratio_Typical / rg;
> +		} else {
> +			/* current_otp.bg_ratio >= BG_Ratio_typical &&
> +			 * current_otp.rg_ratio >= RG_Ratio_typical
> +			 */
> +			G_gain_B = 0x400 * bg / BG_Ratio_Typical;
> +			G_gain_R = 0x400 * rg / RG_Ratio_Typical;
> +			if (G_gain_B > G_gain_R) {
> +				B_gain = 0x400;
> +				G_gain = G_gain_B;
> +				R_gain = G_gain * RG_Ratio_Typical / rg;
> +			} else {
> +				R_gain = 0x400;
> +				G_gain = G_gain_R;
> +				B_gain = G_gain * BG_Ratio_Typical / bg;
> +			}
> +		}
> +	}
> +
> +	dev->current_otp.R_gain = R_gain;
> +	dev->current_otp.G_gain = G_gain;
> +	dev->current_otp.B_gain = B_gain;
> +
> +	ret = ov5648_write_reg(client, OV5648_8BIT,
> +		OV5648_SW_STREAM, OV5648_STOP_STREAMING);
> +	return ret ;
> +}
> +
> +#endif
> +
> +static int power_ctrl(struct v4l2_subdev *sd, bool flag)
> +{
> +	int ret = 0;
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	if (!dev || !dev->platform_data)
> +		return -ENODEV;
> +
> +	/* Non-gmin platforms use the legacy callback */
> +	if (dev->platform_data->power_ctrl)
> +		return dev->platform_data->power_ctrl(sd, flag);
> +
> +	if (flag) {
> +		ret |= dev->platform_data->v1p8_ctrl(sd, 1);
> +		ret |= dev->platform_data->v2p8_ctrl(sd, 1);
> +		usleep_range(10000, 15000);
> +	}
> +
> +	if (!flag || ret) {
> +		ret |= dev->platform_data->v1p8_ctrl(sd, 0);
> +		ret |= dev->platform_data->v2p8_ctrl(sd, 0);
> +	}
> +	return ret;
> +}
> +
> +static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
> +{
> +	int ret;
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +
> +	if (!dev || !dev->platform_data)
> +		return -ENODEV;
> +
> +	/* Non-gmin platforms use the legacy callback */
> +	if (dev->platform_data->gpio_ctrl)
> +		return dev->platform_data->gpio_ctrl(sd, flag);
> +
> +	/* GPIO0 == "RESETB", GPIO1 == "PWDNB", named in opposite
> +	 * senses but with the same behavior: both must be high for
> +	 * the device to opperate */
> +	if (flag) {
> +		ret = dev->platform_data->gpio0_ctrl(sd, 1);
> +		usleep_range(10000, 15000);
> +		ret |= dev->platform_data->gpio1_ctrl(sd, 1);
> +		usleep_range(10000, 15000);
> +	} else {
> +		ret = dev->platform_data->gpio1_ctrl(sd, 0);
> +		ret |= dev->platform_data->gpio0_ctrl(sd, 0);
> +	}
> +	return ret;
> +}
> +
> +static int power_up(struct v4l2_subdev *sd)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret;
> +
> +	dev_dbg(&client->dev, "@%s:\n", __func__);
> +	if (!dev->platform_data) {
> +		dev_err(&client->dev,
> +			"no camera_sensor_platform_data");
> +		return -ENODEV;
> +	}
> +
> +	/* power control */
> +	ret = power_ctrl(sd, 1);
> +	if (ret)
> +		goto fail_power;
> +
> +	/* according to DS, at least 5ms is needed between DOVDD and PWDN */
> +	usleep_range(5000, 6000);
> +
> +	/* gpio ctrl */
> +	ret = gpio_ctrl(sd, 1);
> +	if (ret) {
> +		ret = gpio_ctrl(sd, 1);
> +		if (ret)
> +			goto fail_power;
> +	}
> +
> +	/* flis clock control */
> +	ret = dev->platform_data->flisclk_ctrl(sd, 1);
> +	if (ret)
> +		goto fail_clk;
> +
> +	/* according to DS, 20ms is needed between PWDN and i2c access */
> +	msleep(20);
> +
> +	return 0;
> +
> +fail_clk:
> +	gpio_ctrl(sd, 0);
> +fail_power:
> +	power_ctrl(sd, 0);
> +	dev_err(&client->dev, "sensor power-up failed\n");
> +
> +	return ret;
> +}
> +
> +static int power_down(struct v4l2_subdev *sd)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	h_flag = H_FLIP_DEFAULT;
> +	v_flag = V_FLIP_DEFAULT;
> +	dev_dbg(&client->dev, "@%s:\n", __func__);
> +	if (!dev->platform_data) {
> +		dev_err(&client->dev,
> +			"no camera_sensor_platform_data");
> +		return -ENODEV;
> +	}
> +
> +	ret = dev->platform_data->flisclk_ctrl(sd, 0);
> +	if (ret)
> +		dev_err(&client->dev, "flisclk failed\n");
> +
> +	/* gpio ctrl */
> +	ret = gpio_ctrl(sd, 0);
> +	if (ret) {
> +		ret = gpio_ctrl(sd, 0);
> +		if (ret)
> +			dev_err(&client->dev, "gpio failed 2\n");
> +	}
> +
> +	/* power control */
> +	ret = power_ctrl(sd, 0);
> +	if (ret)
> +		dev_err(&client->dev, "vprog failed.\n");
> +
> +	return ret;
> +}
> +
> +static int ov5648_s_power(struct v4l2_subdev *sd, int on)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	dev_dbg(&client->dev, "@%s:\n", __func__);
> +	if (on == 0) {
> +		ret = power_down(sd);
> +		ret |= ov5648_vcm_power_down(sd);
> +	} else {
> +		ret = ov5648_vcm_power_up(sd);
> +		if (ret)
> +			return ret;
> +
> +		ret |= power_up(sd);
> +		if (!ret)
> +			return ov5648_init(sd);
> +	}
> +	return ret;
> +}
> +
> +/*
> + * distance - calculate the distance
> + * @res: resolution
> + * @w: width
> + * @h: height
> + *
> + * Get the gap between resolution and w/h.
> + * res->width/height smaller than w/h wouldn't be considered.
> + * Returns the value of gap or -1 if fail.
> + */
> +#define LARGEST_ALLOWED_RATIO_MISMATCH 900
> +static int distance(struct ov5648_resolution *res, u32 w, u32 h)
> +{
> +	unsigned int w_ratio = ((res->width << 13) / w);
> +	unsigned int h_ratio;
> +	int match;
> +
> +	if (h == 0)
> +		return -1;
> +	h_ratio = ((res->height << 13) / h);
> +	if (h_ratio == 0)
> +		return -1;
> +	match   = abs(((w_ratio << 13) / h_ratio) - ((int)8192));
> +
> +	if ((w_ratio < (int)8192) || (h_ratio < (int)8192)  ||
> +		(match > LARGEST_ALLOWED_RATIO_MISMATCH))
> +		return -1;
> +
> +	return w_ratio + h_ratio;
> +}
> +
> +/* Return the nearest higher resolution index */
> +static int nearest_resolution_index(int w, int h)
> +{
> +	int i;
> +	int idx = -1;
> +	int dist;
> +	int min_dist = INT_MAX;
> +	struct ov5648_resolution *tmp_res = NULL;
> +
> +	for (i = 0; i < N_RES; i++) {
> +		tmp_res = &ov5648_res[i];
> +		dist = distance(tmp_res, w, h);
> +		if (dist == -1)
> +			continue;
> +		if (dist < min_dist) {
> +			min_dist = dist;
> +			idx = i;
> +		}
> +	}
> +
> +	return idx;
> +}
> +
> +static int get_resolution_index(int w, int h)
> +{
> +	int i;
> +
> +	for (i = 0; i < N_RES; i++) {
> +		if (w != ov5648_res[i].width)
> +			continue;
> +		if (h != ov5648_res[i].height)
> +			continue;
> +
> +		return i;
> +	}
> +
> +	return -1;
> +}
> +
> +static int ov5648_set_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_pad_config *cfg,
> +			  struct v4l2_subdev_format *format)
> +{
> +	struct v4l2_mbus_framefmt *fmt = &format->format;
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	struct camera_mipi_info *ov5648_info = NULL;
> +	int ret = 0;
> +	int idx;
> +
> +	if (format->pad)
> +		return -EINVAL;
> +
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	ov5648_info = v4l2_get_subdev_hostdata(sd);
> +	if (!ov5648_info)
> +		return -EINVAL;
> +
> +	mutex_lock(&dev->input_lock);
> +	idx = nearest_resolution_index(fmt->width,
> +					fmt->height);
> +	if (idx == -1) {
> +		/* return the largest resolution */
> +		fmt->width = ov5648_res[0].width;
> +		fmt->height = ov5648_res[0].height;
> +	} else {
> +		fmt->width = ov5648_res[idx].width;
> +		fmt->height = ov5648_res[idx].height;
> +	}
> +	fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		cfg->try_fmt = *fmt;
> +		mutex_unlock(&dev->input_lock);
> +		return 0;
> +		}
> +	dev->fmt_idx = get_resolution_index(fmt->width,
> +					      fmt->height);
> +	if (dev->fmt_idx == -1) {
> +		dev_err(&client->dev, "get resolution fail\n");
> +		mutex_unlock(&dev->input_lock);
> +		return -EINVAL;
> +	}
> +
> +	ret = ov5648_write_reg_array(client, ov5648_res[dev->fmt_idx].regs);
> +	if (ret)
> +		dev_err(&client->dev, "ov5648 write register err.\n");
> +	else if (dev->current_otp.otp_en == 1)
> +		update_awb_gain(sd);
> +
> +	/*recall flip functions to avoid flip registers
> +	 * were overrided by default setting
> +	 */
> +	if (h_flag)
> +		ov5648_h_flip(sd, h_flag);
> +	if (v_flag)
> +		ov5648_v_flip(sd, v_flag);
> +
> +	ret = ov5648_get_intg_factor(client, ov5648_info,
> +					&ov5648_res[dev->fmt_idx]);
> +	if (ret) {
> +		dev_err(&client->dev, "failed to get integration_factor\n");
> +		goto err;
> +	}
> +
> +err:
> +	mutex_unlock(&dev->input_lock);
> +	return ret;
> +}
> +
> +static int ov5648_get_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_pad_config *cfg,
> +			  struct v4l2_subdev_format *format)
> +{
> +	struct v4l2_mbus_framefmt *fmt = &format->format;
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +
> +	if (format->pad)
> +		return -EINVAL;
> +
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	fmt->width = ov5648_res[dev->fmt_idx].width;
> +	fmt->height = ov5648_res[dev->fmt_idx].height;
> +	fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +
> +	return 0;
> +}
> +
> +static int ov5648_detect(struct i2c_client *client)
> +{
> +	struct i2c_adapter *adapter = client->adapter;
> +	u16 high, low;
> +	int ret;
> +	u16 id;
> +	u8 revision;
> +
> +	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
> +		return -ENODEV;
> +
> +	ret = ov5648_read_reg(client, OV5648_8BIT,
> +					OV5648_SC_CMMN_CHIP_ID_H, &high);
> +	if (ret) {
> +		dev_err(&client->dev, "sensor_id_high = 0x%x\n", high);
> +		return -ENODEV;
> +	}
> +	ret = ov5648_read_reg(client, OV5648_8BIT,
> +					OV5648_SC_CMMN_CHIP_ID_L, &low);
> +	id = ((((u16) high) << 8) | (u16) low);
> +
> +	if (id != OV5648_ID) {
> +		dev_err(&client->dev, "sensor ID error\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = ov5648_read_reg(client, OV5648_8BIT,
> +					OV5648_SC_CMMN_SUB_ID, &high);
> +	revision = (u8) high & 0x0f;
> +
> +	dev_dbg(&client->dev, "sensor_revision = 0x%x\n", revision);
> +	dev_dbg(&client->dev, "detect ov5648 success\n");
> +	return 0;
> +}
> +
> +static int ov5648_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret;
> +	dev_dbg(&client->dev, "@%s:\n", __func__);
> +	mutex_lock(&dev->input_lock);
> +
> +	ret = ov5648_write_reg(client, OV5648_8BIT, OV5648_SW_STREAM,
> +				enable ? OV5648_START_STREAMING :
> +				OV5648_STOP_STREAMING);
> +
> +	mutex_unlock(&dev->input_lock);
> +
> +	return ret;
> +}
> +
> +static int ov5648_s_config(struct v4l2_subdev *sd,
> +			   int irq, void *platform_data)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +	int ret = 0;
> +
> +	if (!platform_data)
> +		return -ENODEV;
> +
> +	dev->platform_data =
> +		(struct camera_sensor_platform_data *)platform_data;
> +
> +	mutex_lock(&dev->input_lock);
> +	/* power off the module, then power on it in future
> +	 * as first power on by board may not fulfill the
> +	 * power on sequqence needed by the module
> +	 */
> +	ret = power_down(sd);
> +	if (ret) {
> +		dev_err(&client->dev, "ov5648 power-off err.\n");
> +		goto fail_power_off;
> +	}
> +
> +	ret = power_up(sd);
> +	if (ret) {
> +		dev_err(&client->dev, "ov5648 power-up err.\n");
> +		goto fail_power_on;
> +	}
> +
> +	ret = dev->platform_data->csi_cfg(sd, 1);
> +	if (ret)
> +		goto fail_csi_cfg;
> +
> +	/* config & detect sensor */
> +	ret = ov5648_detect(client);
> +	if (ret) {
> +		dev_err(&client->dev, "ov5648_detect err s_config.\n");
> +		goto fail_csi_cfg;
> +	}
> +	if (dev->current_otp.otp_en == 1)
> +		update_otp(sd);
> +	/* turn off sensor, after probed */
> +	ret = power_down(sd);
> +	if (ret) {
> +		dev_err(&client->dev, "ov5648 power-off err.\n");
> +		goto fail_csi_cfg;
> +	}
> +	mutex_unlock(&dev->input_lock);
> +
> +	return 0;
> +
> +fail_csi_cfg:
> +	dev->platform_data->csi_cfg(sd, 0);
> +fail_power_on:
> +	power_down(sd);
> +	dev_err(&client->dev, "sensor power-gating failed\n");
> +fail_power_off:
> +	mutex_unlock(&dev->input_lock);
> +	return ret;
> +}
> +
> +static int ov5648_g_parm(struct v4l2_subdev *sd,
> +			struct v4l2_streamparm *param)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(sd);
> +
> +	if (!param)
> +		return -EINVAL;
> +
> +	if (param->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
> +		dev_err(&client->dev,  "unsupported buffer type.\n");
> +		return -EINVAL;
> +	}
> +
> +	memset(param, 0, sizeof(*param));
> +	param->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +
> +	if (dev->fmt_idx >= 0 && dev->fmt_idx < N_RES) {
> +		param->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
> +		param->parm.capture.timeperframe.numerator = 1;
> +		param->parm.capture.capturemode = dev->run_mode;
> +		param->parm.capture.timeperframe.denominator =
> +			ov5648_res[dev->fmt_idx].fps;
> +	}
> +	return 0;
> +}
> +
> +static int ov5648_s_parm(struct v4l2_subdev *sd,
> +			struct v4l2_streamparm *param)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	dev->run_mode = param->parm.capture.capturemode;
> +
> +	mutex_lock(&dev->input_lock);
> +	switch (dev->run_mode) {
> +	case CI_MODE_VIDEO:
> +		ov5648_res = ov5648_res_video;
> +		N_RES = N_RES_VIDEO;
> +		break;
> +	case CI_MODE_STILL_CAPTURE:
> +		ov5648_res = ov5648_res_still;
> +		N_RES = N_RES_STILL;
> +		break;
> +	default:
> +		ov5648_res = ov5648_res_preview;
> +		N_RES = N_RES_PREVIEW;
> +	}
> +	mutex_unlock(&dev->input_lock);
> +	return 0;
> +}
> +
> +static int ov5648_g_frame_interval(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_frame_interval *interval)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +
> +	interval->interval.numerator = 1;
> +	interval->interval.denominator = ov5648_res[dev->fmt_idx].fps;
> +
> +	return 0;
> +}
> +
> +static int ov5648_enum_mbus_code(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_pad_config *cfg,
> +				 struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index >= MAX_FMTS)
> +		return -EINVAL;
> +
> +	code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +	return 0;
> +}
> +
> +static int ov5648_enum_frame_size(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_pad_config *cfg,
> +				  struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	int index = fse->index;
> +
> +	if (index >= N_RES)
> +		return -EINVAL;
> +
> +	fse->min_width = ov5648_res[index].width;
> +	fse->min_height = ov5648_res[index].height;
> +	fse->max_width = ov5648_res[index].width;
> +	fse->max_height = ov5648_res[index].height;
> +
> +	return 0;
> +
> +}
> +
> +static int ov5648_g_skip_frames(struct v4l2_subdev *sd, u32 *frames)
> +{
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +
> +	mutex_lock(&dev->input_lock);
> +	*frames = ov5648_res[dev->fmt_idx].skip_frames;
> +	mutex_unlock(&dev->input_lock);
> +
> +	return 0;
> +}
> +
> +
> +static const struct v4l2_subdev_sensor_ops ov5648_sensor_ops = {
> +	.g_skip_frames	= ov5648_g_skip_frames,
> +};
> +
> +static const struct v4l2_subdev_video_ops ov5648_video_ops = {
> +	.s_stream = ov5648_s_stream,
> +	.g_parm = ov5648_g_parm,
> +	.s_parm = ov5648_s_parm,
> +	.g_frame_interval = ov5648_g_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_core_ops ov5648_core_ops = {
> +	.s_power = ov5648_s_power,
> +	.ioctl = ov5648_ioctl,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ov5648_pad_ops = {
> +	.enum_mbus_code = ov5648_enum_mbus_code,
> +	.enum_frame_size = ov5648_enum_frame_size,
> +	.get_fmt = ov5648_get_fmt,
> +	.set_fmt = ov5648_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops ov5648_ops = {
> +	.core = &ov5648_core_ops,
> +	.video = &ov5648_video_ops,
> +	.pad = &ov5648_pad_ops,
> +	.sensor = &ov5648_sensor_ops,
> +};
> +
> +static int ov5648_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct ov5648_device *dev = to_ov5648_sensor(sd);
> +	dev_dbg(&client->dev, "ov5648_remove...\n");
> +
> +	dev->platform_data->csi_cfg(sd, 0);
> +
> +	v4l2_device_unregister_subdev(sd);
> +	media_entity_cleanup(&dev->sd.entity);
> +	v4l2_ctrl_handler_free(&dev->ctrl_handler);
> +	kfree(dev);
> +
> +	return 0;
> +}
> +
> +static int ov5648_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct ov5648_device *dev;
> +	size_t len = CAMERA_MODULE_ID_LEN * sizeof(char);
> +	int ret;
> +	void *pdata;
> +	unsigned int i;
> +
> +	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> +	if (!dev) {
> +		dev_err(&client->dev, "out of memory\n");
> +		return -ENOMEM;
> +	}
> +
> +	dev->camera_module = kzalloc(len, GFP_KERNEL);
> +	if (!dev->camera_module) {
> +		kfree(dev);
> +		dev_err(&client->dev, "out of memory\n");
> +		return -ENOMEM;
> +	}
> +
> +	mutex_init(&dev->input_lock);
> +
> +	dev->fmt_idx = 0;
> +	//otp functions
> +	dev->current_otp.otp_en = 1;// enable otp functions
> +	v4l2_i2c_subdev_init(&(dev->sd), client, &ov5648_ops);
> +
> +	if (gmin_get_config_var(&client->dev, "CameraModule",
> +				dev->camera_module, &len)) {
> +		kfree(dev->camera_module);
> +		dev->camera_module = NULL;
> +		dev_info(&client->dev, "Camera module id is missing\n");
> +	}
> +
> +	if (ACPI_COMPANION(&client->dev))
> +		pdata = gmin_camera_platform_data(&dev->sd,
> +						  ATOMISP_INPUT_FORMAT_RAW_10,
> +						  atomisp_bayer_order_bggr);
> +	else
> +		pdata = client->dev.platform_data;
> +
> +	if (!pdata) {
> +		ret = -EINVAL;
> +		goto out_free;
> +	}
> +
> +	ret = ov5648_s_config(&dev->sd, client->irq, pdata);
> +	if (ret)
> +		goto out_free;
> +
> +	ret = atomisp_register_i2c_module(&dev->sd, pdata, RAW_CAMERA);
> +	if (ret)
> +		goto out_free;
> +
> +	dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	dev->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	dev->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +	dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	ret =
> +	    v4l2_ctrl_handler_init(&dev->ctrl_handler,
> +				   ARRAY_SIZE(ov5648_controls));
> +	if (ret) {
> +		ov5648_remove(client);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(ov5648_controls); i++)
> +		v4l2_ctrl_new_custom(&dev->ctrl_handler, &ov5648_controls[i],
> +				     NULL);
> +
> +	if (dev->ctrl_handler.error) {
> +		ov5648_remove(client);
> +		return dev->ctrl_handler.error;
> +	}
> +
> +	/* Use same lock for controls as for everything else. */
> +	dev->ctrl_handler.lock = &dev->input_lock;
> +	dev->sd.ctrl_handler = &dev->ctrl_handler;
> +
> +	ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
> +	if (ret)
> +		ov5648_remove(client);
> +
> +	return ret;
> +out_free:
> +	v4l2_device_unregister_subdev(&dev->sd);
> +	kfree(dev->camera_module);
> +	kfree(dev);
> +	return ret;
> +}
> +
> +static const struct acpi_device_id ov5648_acpi_match[] = {
> +	{"XXOV5648"},
> +	{"INT5648"},

Where do these IDs come from?

Are either being actually used on an ACPI table in a production device?

> +	{},
> +};
> +MODULE_DEVICE_TABLE(acpi, ov5648_acpi_match);
> +
> +MODULE_DEVICE_TABLE(i2c, ov5648_id);
> +static struct i2c_driver ov5648_driver = {
> +	.driver = {
> +		.owner = THIS_MODULE,
> +		.name = OV5648_NAME,
> +		.acpi_match_table = ACPI_PTR(ov5648_acpi_match),
> +	},
> +	.probe = ov5648_probe,
> +	.remove = ov5648_remove,
> +	.id_table = ov5648_id,
> +};
> +
> +static int init_ov5648(void)
> +{
> +	return i2c_add_driver(&ov5648_driver);
> +}
> +
> +static void exit_ov5648(void)
> +{
> +
> +	i2c_del_driver(&ov5648_driver);
> +}
> +
> +module_init(init_ov5648);
> +module_exit(exit_ov5648);
> +
> +MODULE_DESCRIPTION("A low-level driver for OmniVision 5648 sensors");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/staging/media/atomisp/i2c/ov5648.h b/drivers/staging/media/atomisp/i2c/ov5648.h
> new file mode 100644
> index 0000000..dc12726
> --- /dev/null
> +++ b/drivers/staging/media/atomisp/i2c/ov5648.h
> @@ -0,0 +1,835 @@
> +/*
> + * Support for OmniVision OV5648 5M camera sensor.
> + * Based on OmniVision OV2722 driver.
> + *
> + * Copyright (c) 2013 Intel Corporation. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __OV5648_H__
> +#define __OV5648_H__
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/videodev2.h>
> +#include <linux/spinlock.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <linux/v4l2-mediabus.h>
> +#include <media/media-entity.h>
> +#include <linux/acpi.h>
> +#include  "../include/linux/atomisp_platform.h"
> +
> +#define OV5648_NAME		"ov5648"
> +
> +/* Defines for register writes and register array processing */
> +#define I2C_MSG_LENGTH		0x2
> +#define I2C_RETRY_COUNT		5
> +
> +#define OV5648_FOCAL_LENGTH_NUM	334	/*3.34mm */
> +#define OV5648_FOCAL_LENGTH_DEM	100
> +#define OV5648_F_NUMBER_DEFAULT_NUM	28
> +#define OV5648_F_NUMBER_DEM	10
> +
> +#define MAX_FMTS		1
> +
> +/* sensor_mode_data read_mode adaptation */
> +#define OV5648_READ_MODE_BINNING_ON	0x0400
> +#define OV5648_READ_MODE_BINNING_OFF	0x00
> +#define OV5648_INTEGRATION_TIME_MARGIN	8
> +
> +#define OV5648_MAX_EXPOSURE_VALUE	0xFFF1
> +#define OV5648_MAX_GAIN_VALUE		0xFF
> +
> +/*
> + * focal length bits definition:
> + * bits 31-16: numerator, bits 15-0: denominator
> + */
> +#define OV5648_FOCAL_LENGTH_DEFAULT 0x1B70064
> +
> +/*
> + * current f-number bits definition:
> + * bits 31-16: numerator, bits 15-0: denominator
> + */
> +#define OV5648_F_NUMBER_DEFAULT 0x18000a
> +
> +/*
> + * f-number range bits definition:
> + * bits 31-24: max f-number numerator
> + * bits 23-16: max f-number denominator
> + * bits 15-8: min f-number numerator
> + * bits 7-0: min f-number denominator
> + */
> +#define OV5648_F_NUMBER_RANGE 0x180a180a
> +#define OV5648_ID	0x5648
> +
> +#define OV5648_FINE_INTG_TIME_MIN 0
> +#define OV5648_FINE_INTG_TIME_MAX_MARGIN 0
> +#define OV5648_COARSE_INTG_TIME_MIN 1
> +#define OV5648_COARSE_INTG_TIME_MAX_MARGIN 6
> +
> +#define OV5648_BIN_FACTOR_MAX 4
> +/*
> + * OV5648 System control registers
> + */
> +#define OV5648_SW_SLEEP			0x0100
> +#define OV5648_SW_RESET			0x0103
> +#define OV5648_SW_STREAM		0x0100
> +
> +#define OV5648_SC_CMMN_CHIP_ID_H	0x300A
> +#define OV5648_SC_CMMN_CHIP_ID_L	0x300B
> +#define OV5648_SC_CMMN_SCCB_ID		0x300C
> +#define OV5648_SC_CMMN_SUB_ID		0x302A	/* process, version */
> +
> +#define OV5648_GROUP_ACCESS 0x3208 /*Bit[7:4] Group control, Bit[3:0] Group ID*/
> +
> +#define OV5648_EXPOSURE_H	0x3500 /*Bit[3:0] Bit[19:16] of exposure, remaining 16 bits lies in Reg0x3501&Reg0x3502*/
> +#define OV5648_EXPOSURE_M	0x3501	/*Bit[15:8] of exposure*/
> +#define OV5648_EXPOSURE_L	0x3502	/*Bit[7:0] of exposure*/
> +#define OV5648_AGC_H		0x350A	/*Bit[1:0] means Bit[9:8] of gain */
> +#define OV5648_AGC_L		0x350B	/*Bit[7:0] of gain */
> +
> +#define OV5648_HORIZONTAL_START_H	0x3800	/*Bit[11:8] */
> +#define OV5648_HORIZONTAL_START_L	0x3801	/*Bit[7:0] */
> +#define OV5648_VERTICAL_START_H		0x3802	/*Bit[11:8] */
> +#define OV5648_VERTICAL_START_L		0x3803	/*Bit[7:0] */
> +#define OV5648_HORIZONTAL_END_H		0x3804	/*Bit[11:8] */
> +#define OV5648_HORIZONTAL_END_L		0x3805	/*Bit[7:0] */
> +#define OV5648_VERTICAL_END_H		0x3806	/*Bit[11:8] */
> +#define OV5648_VERTICAL_END_L		0x3807	/*Bit[7:0] */
> +#define OV5648_HORIZONTAL_OUTPUT_SIZE_H	0x3808	/*Bit[3:0] */
> +#define OV5648_HORIZONTAL_OUTPUT_SIZE_L	0x3809	/*Bit[7:0] */
> +#define OV5648_VERTICAL_OUTPUT_SIZE_H	0x380a	/*Bit[3:0] */
> +#define OV5648_VERTICAL_OUTPUT_SIZE_L	0x380b	/*Bit[7:0] */
> +#define OV5648_TIMING_HTS_H		0x380C	/*HTS High 8-bit*/
> +#define OV5648_TIMING_HTS_L		0x380D	/*HTS Low 8-bit*/
> +#define OV5648_TIMING_VTS_H		0x380e	/*VTS High 8-bit */
> +#define OV5648_TIMING_VTS_L		0x380f	/*VTS Low 8-bit*/
> +
> +#define OV5648_VFLIP_REG		0x3820
> +#define OV5648_HFLIP_REG		0x3821
> +#define OV5648_VFLIP_VALUE		0x06
> +#define OV5648_HFLIP_VALUE		0x06
> +
> +#define OV5648_MWB_RED_GAIN_H		0x5186
> +#define OV5648_MWB_GREEN_GAIN_H		0x5188
> +#define OV5648_MWB_BLUE_GAIN_H		0x518A
> +#define OV5648_MWB_GAIN_MAX		0x0fff
> +
> +#define OV5648_START_STREAMING		0x01
> +#define OV5648_STOP_STREAMING		0x00
> +
> +// Add OTP operation
> +#define BG_Ratio_Typical  0x16E
> +#define RG_Ratio_Typical  0x189
> +
> +struct otp_struct {
> +		u16 otp_en;
> +		u16 module_integrator_id;
> +		u16 lens_id;
> +		u16 rg_ratio;
> +		u16 bg_ratio;
> +		u16 user_data[2];
> +		u16 light_rg;
> +		u16 light_bg;
> +		int R_gain;
> +		int G_gain;
> +		int B_gain;
> +};
> +
> +struct regval_list {
> +	u16 reg_num;
> +	u8 value;
> +};
> +
> +struct ov5648_resolution {
> +	u8 *desc;
> +	const struct ov5648_reg *regs;
> +	int res;
> +	int width;
> +	int height;
> +	int fps;
> +	int pix_clk_freq;
> +	u32 skip_frames;
> +	u16 pixels_per_line;
> +	u16 lines_per_frame;
> +	u8 bin_factor_x;
> +	u8 bin_factor_y;
> +	u8 bin_mode;
> +	bool used;
> +};
> +
> +struct ov5648_format {
> +	u8 *desc;
> +	u32 pixelformat;
> +	struct ov5648_reg *regs;
> +};
> +
> +/*
> + * ov5648 device structure.
> + */
> +struct ov5648_device {
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +	struct v4l2_mbus_framefmt format;
> +	struct mutex input_lock;
> +	struct v4l2_ctrl_handler ctrl_handler;
> +
> +	struct camera_sensor_platform_data *platform_data;
> +	int vt_pix_clk_freq_mhz;
> +	int fmt_idx;
> +	int run_mode;
> +	u8 res;
> +	u8 type;
> +
> +	char *camera_module;
> +	struct camera_vcm_control *vcm_driver;
> +	struct otp_struct current_otp;
> +	int pre_digitgain;
> +};
> +
> +enum ov5648_tok_type {
> +	OV5648_8BIT = 0x0001,
> +	OV5648_16BIT = 0x0002,
> +	OV5648_32BIT = 0x0004,
> +	OV5648_TOK_TERM = 0xf000,/* terminating token for reg list */
> +	OV5648_TOK_DELAY = 0xfe00,/* delay token for reg list */
> +	OV5648_TOK_MASK = 0xfff0
> +};
> +
> +/**
> + * struct ov5648_reg - MI sensor  register format
> + * @type: type of the register
> + * @reg: 16-bit offset to register
> + * @val: 8/16/32-bit register value
> + *
> + * Define a structure for sensor register initialization values
> + */
> +struct ov5648_reg {
> +	enum ov5648_tok_type type;
> +	u16 reg;
> +	u32 val;		/* @set value for read/mod/write, @mask */
> +};
> +
> +#define to_ov5648_sensor(x) container_of(x, struct ov5648_device, sd)
> +
> +#define OV5648_MAX_WRITE_BUF_SIZE	30
> +
> +struct ov5648_write_buffer {
> +	u16 addr;
> +	u8 data[OV5648_MAX_WRITE_BUF_SIZE];
> +};
> +
> +struct ov5648_write_ctrl {
> +	int index;
> +	struct ov5648_write_buffer buffer;
> +};
> +
> +static const struct i2c_device_id ov5648_id[] = {
> +	{OV5648_NAME, 0},
> +	{}
> +};
> +
> +static const struct ov5648_reg ov5648_global_settings[] = {
> +	{OV5648_8BIT, 0x0103, 0x01},
> +	{OV5648_8BIT, 0x3001, 0x00},
> +	{OV5648_8BIT, 0x3002, 0x00},
> +	{OV5648_8BIT, 0x3011, 0x02},
> +	{OV5648_8BIT, 0x3017, 0x05},
> +	{OV5648_8BIT, 0x3018, 0x4c},
> +	{OV5648_8BIT, 0x301c, 0xd2},
> +	{OV5648_8BIT, 0x3022, 0x00},
> +	{OV5648_8BIT, 0x3034, 0x1a},
> +	{OV5648_8BIT, 0x3035, 0x21},
> +	{OV5648_8BIT, 0x3036, 0x69},
> +	{OV5648_8BIT, 0x3037, 0x03},
> +	{OV5648_8BIT, 0x3038, 0x00},
> +	{OV5648_8BIT, 0x3039, 0x00},
> +	{OV5648_8BIT, 0x303a, 0x00},
> +	{OV5648_8BIT, 0x303b, 0x19},
> +	{OV5648_8BIT, 0x303c, 0x11},
> +	{OV5648_8BIT, 0x303d, 0x30},
> +	{OV5648_8BIT, 0x3105, 0x11},
> +	{OV5648_8BIT, 0x3106, 0x05},
> +	{OV5648_8BIT, 0x3304, 0x28},
> +	{OV5648_8BIT, 0x3305, 0x41},
> +	{OV5648_8BIT, 0x3306, 0x30},
> +	{OV5648_8BIT, 0x3308, 0x00},
> +	{OV5648_8BIT, 0x3309, 0xc8},
> +	{OV5648_8BIT, 0x330a, 0x01},
> +	{OV5648_8BIT, 0x330b, 0x90},
> +	{OV5648_8BIT, 0x330c, 0x02},
> +	{OV5648_8BIT, 0x330d, 0x58},
> +	{OV5648_8BIT, 0x330e, 0x03},
> +	{OV5648_8BIT, 0x330f, 0x20},
> +	{OV5648_8BIT, 0x3300, 0x00},
> +	{OV5648_8BIT, 0x3500, 0x00},
> +	{OV5648_8BIT, 0x3501, 0x7b},
> +	{OV5648_8BIT, 0x3502, 0x00},
> +	{OV5648_8BIT, 0x3503, 0x07},
> +	{OV5648_8BIT, 0x350a, 0x00},
> +	{OV5648_8BIT, 0x350b, 0x40},
> +	{OV5648_8BIT, 0x3601, 0x33},
> +	{OV5648_8BIT, 0x3602, 0x00},
> +	{OV5648_8BIT, 0x3611, 0x0e},
> +	{OV5648_8BIT, 0x3612, 0x2b},
> +	{OV5648_8BIT, 0x3614, 0x50},
> +	{OV5648_8BIT, 0x3620, 0x33},
> +	{OV5648_8BIT, 0x3622, 0x00},
> +	{OV5648_8BIT, 0x3630, 0xad},
> +	{OV5648_8BIT, 0x3631, 0x00},
> +	{OV5648_8BIT, 0x3632, 0x94},
> +	{OV5648_8BIT, 0x3633, 0x17},
> +	{OV5648_8BIT, 0x3634, 0x14},
> +	{OV5648_8BIT, 0x3704, 0xc0},
> +	{OV5648_8BIT, 0x3705, 0x2a},
> +	{OV5648_8BIT, 0x3708, 0x63},
> +	{OV5648_8BIT, 0x3709, 0x12},
> +	{OV5648_8BIT, 0x370b, 0x23},
> +	{OV5648_8BIT, 0x370c, 0xc0},
> +	{OV5648_8BIT, 0x370d, 0x00},
> +	{OV5648_8BIT, 0x370e, 0x00},
> +	{OV5648_8BIT, 0x371c, 0x07},
> +	{OV5648_8BIT, 0x3739, 0xd2},
> +	{OV5648_8BIT, 0x373c, 0x00},
> +	{OV5648_8BIT, 0x3800, 0x00},
> +	{OV5648_8BIT, 0x3801, 0x00},
> +	{OV5648_8BIT, 0x3802, 0x00},
> +	{OV5648_8BIT, 0x3803, 0x00},
> +	{OV5648_8BIT, 0x3804, 0x0a},
> +	{OV5648_8BIT, 0x3805, 0x3f},
> +	{OV5648_8BIT, 0x3806, 0x07},
> +	{OV5648_8BIT, 0x3807, 0xa3},
> +	{OV5648_8BIT, 0x3808, 0x0a},
> +	{OV5648_8BIT, 0x3809, 0x20},
> +	{OV5648_8BIT, 0x380a, 0x07},
> +	{OV5648_8BIT, 0x380b, 0x98},
> +	{OV5648_8BIT, 0x380c, 0x0b},
> +	{OV5648_8BIT, 0x380d, 0x00},
> +	{OV5648_8BIT, 0x380e, 0x07},
> +	{OV5648_8BIT, 0x380f, 0xc0},
> +	{OV5648_8BIT, 0x3810, 0x00},
> +	{OV5648_8BIT, 0x3811, 0x10},
> +	{OV5648_8BIT, 0x3812, 0x00},
> +	{OV5648_8BIT, 0x3813, 0x06},
> +	{OV5648_8BIT, 0x3814, 0x11},
> +	{OV5648_8BIT, 0x3815, 0x11},
> +	{OV5648_8BIT, 0x3817, 0x00},
> +	{OV5648_8BIT, 0x3820, 0x40},
> +	{OV5648_8BIT, 0x3821, 0x06},
> +	{OV5648_8BIT, 0x3826, 0x03},
> +	{OV5648_8BIT, 0x3829, 0x00},
> +	{OV5648_8BIT, 0x382b, 0x0b},
> +	{OV5648_8BIT, 0x3830, 0x00},
> +	{OV5648_8BIT, 0x3836, 0x00},
> +	{OV5648_8BIT, 0x3837, 0x00},
> +	{OV5648_8BIT, 0x3838, 0x00},
> +	{OV5648_8BIT, 0x3839, 0x04},
> +	{OV5648_8BIT, 0x383a, 0x00},
> +	{OV5648_8BIT, 0x383b, 0x01},
> +	{OV5648_8BIT, 0x3b00, 0x00},
> +	{OV5648_8BIT, 0x3b02, 0x08},
> +	{OV5648_8BIT, 0x3b03, 0x00},
> +	{OV5648_8BIT, 0x3b04, 0x04},
> +	{OV5648_8BIT, 0x3b05, 0x00},
> +	{OV5648_8BIT, 0x3b06, 0x04},
> +	{OV5648_8BIT, 0x3b07, 0x08},
> +	{OV5648_8BIT, 0x3b08, 0x00},
> +	{OV5648_8BIT, 0x3b09, 0x02},
> +	{OV5648_8BIT, 0x3b0a, 0x04},
> +	{OV5648_8BIT, 0x3b0b, 0x00},
> +	{OV5648_8BIT, 0x3b0c, 0x3d},
> +	{OV5648_8BIT, 0x3f01, 0x0d},
> +	{OV5648_8BIT, 0x3f0f, 0xf5},
> +	{OV5648_8BIT, 0x4000, 0x89},
> +	{OV5648_8BIT, 0x4001, 0x02},
> +	{OV5648_8BIT, 0x4002, 0x45},
> +	{OV5648_8BIT, 0x4004, 0x04},
> +	{OV5648_8BIT, 0x4005, 0x18},
> +	{OV5648_8BIT, 0x4006, 0x08},
> +	{OV5648_8BIT, 0x4007, 0x10},
> +	{OV5648_8BIT, 0x4008, 0x00},
> +	{OV5648_8BIT, 0x4050, 0x6e},
> +	{OV5648_8BIT, 0x4051, 0x8f},
> +	{OV5648_8BIT, 0x4300, 0xf8},
> +	{OV5648_8BIT, 0x4303, 0xff},
> +	{OV5648_8BIT, 0x4304, 0x00},
> +	{OV5648_8BIT, 0x4307, 0xff},
> +	{OV5648_8BIT, 0x4520, 0x00},
> +	{OV5648_8BIT, 0x4521, 0x00},
> +	{OV5648_8BIT, 0x4511, 0x22},
> +	{OV5648_8BIT, 0x4801, 0x0f},
> +	{OV5648_8BIT, 0x4814, 0x2a},
> +	{OV5648_8BIT, 0x481f, 0x3c},
> +	{OV5648_8BIT, 0x4823, 0x3c},
> +	{OV5648_8BIT, 0x4826, 0x00},
> +	{OV5648_8BIT, 0x481b, 0x3c},
> +	{OV5648_8BIT, 0x4827, 0x32},
> +	{OV5648_8BIT, 0x4837, 0x17},
> +	{OV5648_8BIT, 0x4b00, 0x06},
> +	{OV5648_8BIT, 0x4b01, 0x0a},
> +	{OV5648_8BIT, 0x4b04, 0x10},
> +	{OV5648_8BIT, 0x5000, 0xff},
> +	{OV5648_8BIT, 0x5001, 0x00},
> +	{OV5648_8BIT, 0x5002, 0x41},
> +	{OV5648_8BIT, 0x5003, 0x0a},
> +	{OV5648_8BIT, 0x5004, 0x00},
> +	{OV5648_8BIT, 0x5043, 0x00},
> +	{OV5648_8BIT, 0x5013, 0x00},
> +	{OV5648_8BIT, 0x501f, 0x03},
> +	{OV5648_8BIT, 0x503d, 0x00},
> +	{OV5648_8BIT, 0x5a00, 0x08},
> +	{OV5648_8BIT, 0x5b00, 0x01},
> +	{OV5648_8BIT, 0x5b01, 0x40},
> +	{OV5648_8BIT, 0x5b02, 0x00},
> +	{OV5648_8BIT, 0x5b03, 0xf0},
> +	{OV5648_TOK_TERM, 0, 0}
> +};
> +
> +/*
> + * Register settings for various resolution
> + */
> +/*B720P(1296X736) 30fps 2lane 10Bit (Binning)*/
> +static struct ov5648_reg const ov5648_720p_30fps_2lanes[] = {
> +	{OV5648_8BIT, 0x3708, 0x66},
> +	{OV5648_8BIT, 0x3709, 0x52},
> +	{OV5648_8BIT, 0x370c, 0xcf},
> +	{OV5648_8BIT, 0x3800, 0x00},/* xstart = 0 */
> +	{OV5648_8BIT, 0x3801, 0x00},/*;xstart10 */
> +	{OV5648_8BIT, 0x3802, 0x00},/* ystart = 226 */
> +	{OV5648_8BIT, 0x3803, 0xe2},/* ystart ;fe */
> +	{OV5648_8BIT, 0x3804, 0x0a},/* xend = 2607 */
> +	{OV5648_8BIT, 0x3805, 0x2f},/* xend */
> +	{OV5648_8BIT, 0x3806, 0x06},/* yend = 1701 */
> +	{OV5648_8BIT, 0x3807, 0xa5},/* yend */
> +	{OV5648_8BIT, 0x3808, 0x05},/* x output size = 1296 */
> +	{OV5648_8BIT, 0x3809, 0x10},/*;x output size 00 */
> +	{OV5648_8BIT, 0x380a, 0x02},/* y output size = 736 */
> +	{OV5648_8BIT, 0x380b, 0xe0},/*;y output size d0 */
> +	{OV5648_8BIT, 0x380c, 0x09},/* hts = 1864  2400 */
> +	{OV5648_8BIT, 0x380d, 0x60},/* hts 48 */
> +	{OV5648_8BIT, 0x380e, 0x04},/* vts = 754; 1120 */
> +	{OV5648_8BIT, 0x380f, 0x60},/* vts f2 */
> +	{OV5648_8BIT, 0x3810, 0x00},/* isp x win (offset)= 0 */
> +	{OV5648_8BIT, 0x3811, 0x00},/* isp x win;08 */
> +	{OV5648_8BIT, 0x3812, 0x00},/* isp y win (offset)= 0 */
> +	{OV5648_8BIT, 0x3813, 0x00},/* isp y win;02 */
> +	{OV5648_8BIT, 0x3814, 0x31},/* x inc */
> +	{OV5648_8BIT, 0x3815, 0x31},/* y inc */
> +	{OV5648_8BIT, 0x3817, 0x00},/* hsync start */
> +	{OV5648_8BIT, 0x3820, 0x08},/* flip off; v bin off */
> +	{OV5648_8BIT, 0x3821, 0x01},/* mirror off; h bin on */
> +	{OV5648_8BIT, 0x4004, 0x02},/* black line number */
> +	{OV5648_8BIT, 0x4005, 0x18},/* blc level trigger */
> +	{OV5648_8BIT, 0x4837, 0x17},/* MIPI global timing ;2f;18 */
> +
> +	{OV5648_8BIT, 0x350b, 0x80},/* gain 8x */
> +	{OV5648_8BIT, 0x3501, 0x2d},/* exposure */
> +	{OV5648_8BIT, 0x3502, 0xc0},/* exposure */
> +	/*;add 19.2MHz 30fps */
> +
> +	{OV5648_8BIT, 0x380e, 0x02},
> +	{OV5648_8BIT, 0x380f, 0xf2},
> +	{OV5648_8BIT, 0x3034, 0x1a},/* mipi 10bit mode */
> +	{OV5648_8BIT, 0x3035, 0x21},
> +	{OV5648_8BIT, 0x3036, 0x58},
> +	{OV5648_8BIT, 0x3037, 0x02},
> +	{OV5648_8BIT, 0x3038, 0x00},
> +	{OV5648_8BIT, 0x3039, 0x00},
> +	{OV5648_8BIT, 0x3106, 0x05},
> +	{OV5648_8BIT, 0x3105, 0x11},
> +	{OV5648_8BIT, 0x303a, 0x00},
> +	{OV5648_8BIT, 0x303b, 0x16},
> +	{OV5648_8BIT, 0x303c, 0x11},
> +	{OV5648_8BIT, 0x303d, 0x20},
> +
> +	{OV5648_TOK_TERM, 0, 0}
> +};
> +
> +/*B720P(1296X864) 30fps 2lane 10Bit (Binning)*/
> +static struct ov5648_reg const ov5648_1296x864_30fps_2lanes[] = {
> +	{OV5648_8BIT, 0x3708, 0x66},
> +	{OV5648_8BIT, 0x3709, 0x52},
> +	{OV5648_8BIT, 0x370c, 0xcf},
> +	{OV5648_8BIT, 0x3800, 0x00},/* xstart = 0 */
> +	{OV5648_8BIT, 0x3801, 0x00},/* xstart ;10 */
> +	{OV5648_8BIT, 0x3802, 0x00},/* ystart = 98 */
> +	{OV5648_8BIT, 0x3803, 0x62},/* ystart */
> +	{OV5648_8BIT, 0x3804, 0x0a},/* xend = 2607 */
> +	{OV5648_8BIT, 0x3805, 0x2f},/* xend */
> +	{OV5648_8BIT, 0x3806, 0x07},/* yend = 1845 */
> +	{OV5648_8BIT, 0x3807, 0x35},/* yend */
> +	{OV5648_8BIT, 0x3808, 0x05},/* x output size = 1296 */
> +	{OV5648_8BIT, 0x3809, 0x10},/*;x output size */
> +	{OV5648_8BIT, 0x380a, 0x03},/* y output size = 864 */
> +	{OV5648_8BIT, 0x380b, 0x60},/*;y output size */
> +	{OV5648_8BIT, 0x380c, 0x09},/* hts = 1864 ;2400 */
> +	{OV5648_8BIT, 0x380d, 0x60},/* hts48 */
> +	{OV5648_8BIT, 0x380e, 0x04},/* vts = 754; 1120 */
> +	{OV5648_8BIT, 0x380f, 0x60},/* vts f2 */
> +	{OV5648_8BIT, 0x3810, 0x00},/* isp x win (offset)= 0 */
> +	{OV5648_8BIT, 0x3811, 0x00},/* isp x win;08 */
> +	{OV5648_8BIT, 0x3812, 0x00},/* isp y win (offset)= 0 */
> +	{OV5648_8BIT, 0x3813, 0x00},/* isp y win;02 */
> +	{OV5648_8BIT, 0x3814, 0x31},/* x inc */
> +	{OV5648_8BIT, 0x3815, 0x31},/* y inc */
> +	{OV5648_8BIT, 0x3817, 0x00},/* hsync start */
> +	{OV5648_8BIT, 0x3820, 0x08},/* flip off; v bin off */
> +	{OV5648_8BIT, 0x3821, 0x01},/* mirror off; h bin on */
> +	{OV5648_8BIT, 0x4004, 0x02},/* black line number */
> +	{OV5648_8BIT, 0x4005, 0x18},/* blc level trigger */
> +	{OV5648_8BIT, 0x4837, 0x17},/* MIPI global timing ;2f;18 */
> +
> +	{OV5648_8BIT, 0x350b, 0x80},/* gain 8x */
> +	{OV5648_8BIT, 0x3501, 0x35},/* exposure */
> +	{OV5648_8BIT, 0x3502, 0xc0},/* exposure */
> +	/*;add 19.2MHz 30fps*/
> +
> +	{OV5648_8BIT, 0x380e, 0x02},
> +	{OV5648_8BIT, 0x380f, 0xf2},
> +	{OV5648_8BIT, 0x3034, 0x1a},/* mipi 10bit mode */
> +	{OV5648_8BIT, 0x3035, 0x21},
> +	{OV5648_8BIT, 0x3036, 0x58},
> +	{OV5648_8BIT, 0x3037, 0x02},
> +	{OV5648_8BIT, 0x3038, 0x00},
> +	{OV5648_8BIT, 0x3039, 0x00},
> +	{OV5648_8BIT, 0x3106, 0x05},
> +	{OV5648_8BIT, 0x3105, 0x11},
> +	{OV5648_8BIT, 0x303a, 0x00},
> +	{OV5648_8BIT, 0x303b, 0x16},
> +	{OV5648_8BIT, 0x303c, 0x11},
> +	{OV5648_8BIT, 0x303d, 0x20},
> +
> +	{OV5648_TOK_TERM, 0, 0}
> +};
> +
> +static struct ov5648_reg const ov5648_1080p_30fps_2lanes[] = {
> +	{OV5648_8BIT, 0x3708, 0x63},
> +	{OV5648_8BIT, 0x3709, 0x12},
> +	{OV5648_8BIT, 0x370c, 0xc0},
> +	{OV5648_8BIT, 0x3800, 0x01},/* xstart = 320 */
> +	{OV5648_8BIT, 0x3801, 0x40},/* xstart */
> +	{OV5648_8BIT, 0x3802, 0x01},/* ystart = 418 */
> +	{OV5648_8BIT, 0x3803, 0xa2},/* ystart */
> +	{OV5648_8BIT, 0x3804, 0x08},/* xend = 2287 */
> +	{OV5648_8BIT, 0x3805, 0xef},/* xend */
> +	{OV5648_8BIT, 0x3806, 0x05},/* yend = 1521 */
> +	{OV5648_8BIT, 0x3807, 0xf1},/* yend */
> +	{OV5648_8BIT, 0x3808, 0x07},/* x output size = 1940 */
> +	{OV5648_8BIT, 0x3809, 0x94},/* x output size */
> +	{OV5648_8BIT, 0x380a, 0x04},/* y output size = 1096 */
> +	{OV5648_8BIT, 0x380b, 0x48},/* y output size */
> +	{OV5648_8BIT, 0x380c, 0x09},/* hts = 2500 */
> +	{OV5648_8BIT, 0x380d, 0xc4},/* hts */
> +	{OV5648_8BIT, 0x380e, 0x04},/* vts = 1120 */
> +	{OV5648_8BIT, 0x380f, 0x60},/* vts */
> +	{OV5648_8BIT, 0x3810, 0x00},/* isp x win = 16 */
> +	{OV5648_8BIT, 0x3811, 0x10},/* isp x win */
> +	{OV5648_8BIT, 0x3812, 0x00},/* isp y win = 4 */
> +	{OV5648_8BIT, 0x3813, 0x04},/* isp y win */
> +	{OV5648_8BIT, 0x3814, 0x11},/* x inc */
> +	{OV5648_8BIT, 0x3815, 0x11},/* y inc */
> +	{OV5648_8BIT, 0x3817, 0x00},/* hsync start */
> +	{OV5648_8BIT, 0x3820, 0x40},/* flip off; v bin off */
> +	{OV5648_8BIT, 0x3821, 0x06},/* mirror off; v bin off */
> +	{OV5648_8BIT, 0x4004, 0x04},/* black line number */
> +	{OV5648_8BIT, 0x4005, 0x18},/* blc always update */
> +	{OV5648_8BIT, 0x4837, 0x18},/* MIPI global timing */
> +
> +	{OV5648_8BIT, 0x350b, 0x40},/* gain 4x */
> +	{OV5648_8BIT, 0x3501, 0x45},/* exposure */
> +	{OV5648_8BIT, 0x3502, 0x80},/* exposure */
> +	/*;add 19.2MHz 30fps */
> +
> +	{OV5648_8BIT, 0x3034, 0x1a},/* mipi 10bit mode */
> +	{OV5648_8BIT, 0x3035, 0x21},
> +	{OV5648_8BIT, 0x3036, 0x58},
> +	{OV5648_8BIT, 0x3037, 0x02},
> +	{OV5648_8BIT, 0x3038, 0x00},
> +	{OV5648_8BIT, 0x3039, 0x00},
> +	{OV5648_8BIT, 0x3106, 0x05},
> +	{OV5648_8BIT, 0x3105, 0x11},
> +	{OV5648_8BIT, 0x303a, 0x00},
> +	{OV5648_8BIT, 0x303b, 0x16},
> +	{OV5648_8BIT, 0x303c, 0x11},
> +	{OV5648_8BIT, 0x303d, 0x20},
> +
> +	{OV5648_TOK_TERM, 0, 0}
> +};
> +
> +/* 2x2 subsampled 4:3 mode giving 1280x960.
> + * 84.48Mhz / (HTS*VTS) == 84.48e6/(2500*1126) == 30.01 fps */
> +static struct ov5648_reg const ov5648_1280x960_30fps_2lanes[] = {
> +	{OV5648_8BIT, 0x3034, 0x1a},
> +	{OV5648_8BIT, 0x3035, 0x21},
> +	{OV5648_8BIT, 0x3036, 0x58},
> +	{OV5648_8BIT, 0x3037, 0x02},
> +	{OV5648_8BIT, 0x3038, 0x00},
> +	{OV5648_8BIT, 0x3039, 0x00},
> +	{OV5648_8BIT, 0x3106, 0x05},
> +	{OV5648_8BIT, 0x3105, 0x11},
> +	{OV5648_8BIT, 0x303a, 0x00},
> +	{OV5648_8BIT, 0x303b, 0x15},
> +	{OV5648_8BIT, 0x303c, 0x11},
> +	{OV5648_8BIT, 0x303d, 0x20},
> +
> +	{OV5648_8BIT, 0x350a, 0x00}, /* Def. analog gain = 0x040/16.0 = 4x */
> +	{OV5648_8BIT, 0x350b, 0x40},
> +	{OV5648_8BIT, 0x3501, 0x45}, /* Def. exposure = 0x45e0 (1118 lines) */
> +	{OV5648_8BIT, 0x3502, 0xe0},
> +
> +	{OV5648_8BIT, 0x3708, 0x66},
> +	{OV5648_8BIT, 0x3709, 0x52},
> +	{OV5648_8BIT, 0x370c, 0xcf},
> +
> +	{OV5648_8BIT, 0x3800, 0x00}, /* Xstart = 0x0000 */
> +	{OV5648_8BIT, 0x3801, 0x00},
> +	{OV5648_8BIT, 0x3802, 0x00}, /* Ystart = 0x0000 */
> +	{OV5648_8BIT, 0x3803, 0x00},
> +	{OV5648_8BIT, 0x3804, 0x0a}, /* Xend = 0x0a3f = 2623 */
> +	{OV5648_8BIT, 0x3805, 0x3f},
> +	{OV5648_8BIT, 0x3806, 0x07}, /* Yend = 0x07a3 = 1955 */
> +	{OV5648_8BIT, 0x3807, 0xa3},
> +	{OV5648_8BIT, 0x3808, 0x05}, /* H output size = 0x0510 = 1280 */
> +	{OV5648_8BIT, 0x3809, 0x00},
> +	{OV5648_8BIT, 0x380a, 0x03}, /* V output size = 0x03cc = 960 */
> +	{OV5648_8BIT, 0x380b, 0xc0},
> +	{OV5648_8BIT, 0x380c, 0x09}, /* H total size = 0x09c4 = 2500 */
> +	{OV5648_8BIT, 0x380d, 0xc4},
> +	{OV5648_8BIT, 0x380e, 0x04}, /* V total size = 0x0466 = 1126 */
> +	{OV5648_8BIT, 0x380f, 0x66},
> +	{OV5648_8BIT, 0x3810, 0x00}, /* X window offset = 16 */
> +	{OV5648_8BIT, 0x3811, 0x10},
> +	{OV5648_8BIT, 0x3812, 0x00}, /* Y window offset = 10 */
> +	{OV5648_8BIT, 0x3813, 0x0a},
> +	{OV5648_8BIT, 0x3814, 0x31}, /* X subsample step: odd = 3, even = 1 */
> +	{OV5648_8BIT, 0x3815, 0x31}, /* Y subsample step: odd = 3, even = 1 */
> +	{OV5648_8BIT, 0x3817, 0x00}, /* HSync start = 0 */
> +	{OV5648_8BIT, 0x3820, 0x08}, /* V flip off, V binning off */
> +	{OV5648_8BIT, 0x3821, 0x07}, /* H mirror on, H binning on */
> +
> +	{OV5648_8BIT, 0x4004, 0x02},
> +	{OV5648_8BIT, 0x4005, 0x18},
> +	{OV5648_8BIT, 0x4837, 0x18},
> +	{OV5648_TOK_TERM, 0, 0}
> +};
> +
> +static struct ov5648_reg const ov5648_5M_15fps_2lanes[] = {
> +	/*;add 19.2MHz */
> +	{OV5648_8BIT, 0x3034, 0x1a},
> +	{OV5648_8BIT, 0x3035, 0x21},
> +	{OV5648_8BIT, 0x3036, 0x58},
> +	{OV5648_8BIT, 0x3037, 0x02},
> +	{OV5648_8BIT, 0x3038, 0x00},
> +	{OV5648_8BIT, 0x3039, 0x00},
> +	{OV5648_8BIT, 0x3106, 0x05},
> +	{OV5648_8BIT, 0x3105, 0x11},
> +	{OV5648_8BIT, 0x303a, 0x00},
> +	{OV5648_8BIT, 0x303b, 0x16},
> +	{OV5648_8BIT, 0x303c, 0x11},
> +	{OV5648_8BIT, 0x303d, 0x20},
> +
> +	{OV5648_8BIT, 0x3708, 0x63},
> +	{OV5648_8BIT, 0x3709, 0x12},
> +	{OV5648_8BIT, 0x370c, 0xc0},
> +	{OV5648_8BIT, 0x3800, 0x00},/* xstart = 0 */
> +	{OV5648_8BIT, 0x3801, 0x00},/* xstart */
> +	{OV5648_8BIT, 0x3802, 0x00},/* ystart = 0 */
> +	{OV5648_8BIT, 0x3803, 0x00},/* ystart */
> +	{OV5648_8BIT, 0x3804, 0x0a},/* xend = 2623 */
> +	{OV5648_8BIT, 0x3805, 0x3f},/* xend */
> +	{OV5648_8BIT, 0x3806, 0x07},/* yend = 1955 */
> +	{OV5648_8BIT, 0x3807, 0xa3},/* yend */
> +	{OV5648_8BIT, 0x3808, 0x0a},/* x output size = 2592 */
> +	{OV5648_8BIT, 0x3809, 0x20},/* x output size */
> +	{OV5648_8BIT, 0x380a, 0x07},/* y output size = 1944 */
> +	{OV5648_8BIT, 0x380b, 0x98},/* y output size */
> +	{OV5648_8BIT, 0x380c, 0x0b},/* hts = 2838 */
> +	{OV5648_8BIT, 0x380d, 0x16},/* hts */
> +	{OV5648_8BIT, 0x380e, 0x07},/* vts = 1984 */
> +	{OV5648_8BIT, 0x380f, 0xc0},/* vts */
> +	{OV5648_8BIT, 0x3810, 0x00},/* isp x win = 16 */
> +	{OV5648_8BIT, 0x3811, 0x10},/* isp x win */
> +	{OV5648_8BIT, 0x3812, 0x00},/* isp y win = 6 */
> +	{OV5648_8BIT, 0x3813, 0x06},/* isp y win */
> +	{OV5648_8BIT, 0x3814, 0x11},/* x inc */
> +	{OV5648_8BIT, 0x3815, 0x11},/* y inc */
> +	{OV5648_8BIT, 0x3817, 0x00},/* hsync start */
> +	{OV5648_8BIT, 0x3820, 0x40},/* flip off; v bin off */
> +	{OV5648_8BIT, 0x3821, 0x06},/* mirror off; v bin off */
> +	{OV5648_8BIT, 0x4004, 0x04},/* black line number */
> +	{OV5648_8BIT, 0x4005, 0x18},/* blc always update */
> +	{OV5648_8BIT, 0x4837, 0x18},/* MIPI global timing */
> +
> +	{OV5648_8BIT, 0x350b, 0x40},
> +	{OV5648_8BIT, 0x3501, 0x7b},
> +	{OV5648_8BIT, 0x3502, 0x00},
> +
> +	{OV5648_TOK_TERM, 0, 0}
> +};
> +
> +struct ov5648_resolution ov5648_res_preview[] = {
> +	{
> +	 .desc = "ov5648_5M_15fps",
> +	 .width = 2592,
> +	 .height = 1944,
> +	 .pix_clk_freq = 84,
> +	 .fps = 15,
> +	 .used = 0,
> +	 .pixels_per_line = 2838,
> +	 .lines_per_frame = 1984,
> +	 .bin_factor_x = 1,
> +	 .bin_factor_y = 1,
> +	 .bin_mode = 0,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_5M_15fps_2lanes,
> +	 },
> +	{
> +	 .desc = "ov5648_1280x960_30fps",
> +	 .width = 1280,
> +	 .height = 960,
> +	 .pix_clk_freq = 84,
> +	 .fps = 30,
> +	 .used = 0,
> +	 .pixels_per_line = 2500,
> +	 .lines_per_frame = 1126,
> +	 .bin_factor_x = 2,
> +	 .bin_factor_y = 2,
> +	 .bin_mode = 1,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_1280x960_30fps_2lanes,
> +	 },
> +	{
> +	 .desc = "ov5648_720P_30fps",
> +	 .width = 1296,
> +	 .height = 736,
> +	 .fps = 30,
> +	 .pix_clk_freq = 84,
> +	 .used = 0,
> +	 .pixels_per_line = 2397,
> +	 .lines_per_frame = 1186,
> +	 .bin_factor_x = 2,
> +	 .bin_factor_y = 2,
> +	 .bin_mode = 1,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_720p_30fps_2lanes,
> +	 },
> +};
> +
> +#define N_RES_PREVIEW (ARRAY_SIZE(ov5648_res_preview))
> +
> +struct ov5648_resolution ov5648_res_still[] = {
> +	{
> +	 .desc = "ov5648_5M_15fps",
> +	 .width = 2592,
> +	 .height = 1944,
> +	 .pix_clk_freq = 84,
> +	 .fps = 15,
> +	 .used = 0,
> +	 .pixels_per_line = 2838,
> +	 .lines_per_frame = 1984,
> +	 .bin_factor_x = 1,
> +	 .bin_factor_y = 1,
> +	 .bin_mode = 0,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_5M_15fps_2lanes,
> +	 },
> +	{
> +	 .desc = "ov5648_1280x960_30fps",
> +	 .width = 1280,
> +	 .height = 960,
> +	 .pix_clk_freq = 84,
> +	 .fps = 30,
> +	 .used = 0,
> +	 .pixels_per_line = 2500,
> +	 .lines_per_frame = 1126,
> +	 .bin_factor_x = 2,
> +	 .bin_factor_y = 2,
> +	 .bin_mode = 1,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_1280x960_30fps_2lanes,
> +	 },
> +	{
> +	 .desc = "ov5648_720P_30fps",
> +	 .width = 1296,
> +	 .height = 736,
> +	 .fps = 30,
> +	 .pix_clk_freq = 84,
> +	 .used = 0,
> +	 .pixels_per_line = 2397,
> +	 .lines_per_frame = 1186,
> +	 .bin_factor_x = 2,
> +	 .bin_factor_y = 2,
> +	 .bin_mode = 1,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_720p_30fps_2lanes,
> +	 },
> +};
> +
> +#define N_RES_STILL (ARRAY_SIZE(ov5648_res_still))
> +
> +struct ov5648_resolution ov5648_res_video[] = {
> +	{
> +	 .desc = "ov5648_5M_15fps",
> +	 .width = 2592,
> +	 .height = 1944,
> +	 .pix_clk_freq = 84,
> +	 .fps = 15,
> +	 .used = 0,
> +	 .pixels_per_line = 2838,
> +	 .lines_per_frame = 1984,
> +	 .bin_factor_x = 1,
> +	 .bin_factor_y = 1,
> +	 .bin_mode = 0,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_5M_15fps_2lanes,
> +	 },
> +	{
> +	 .desc = "ov5648_1280x960_30fps",
> +	 .width = 1280,
> +	 .height = 960,
> +	 .pix_clk_freq = 84,
> +	 .fps = 30,
> +	 .used = 0,
> +	 .pixels_per_line = 2500,
> +	 .lines_per_frame = 1126,
> +	 .bin_factor_x = 2,
> +	 .bin_factor_y = 2,
> +	 .bin_mode = 1,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_1280x960_30fps_2lanes,
> +	 },
> +	{
> +	 .desc = "ov5648_720P_30fps",
> +	 .width = 1296,
> +	 .height = 736,
> +	 .fps = 30,
> +	 .pix_clk_freq = 84,
> +	 .used = 0,
> +	 .pixels_per_line = 2397,
> +	 .lines_per_frame = 1186,
> +	 .bin_factor_x = 2,
> +	 .bin_factor_y = 2,
> +	 .bin_mode = 1,
> +	 .skip_frames = 3,
> +	 .regs = ov5648_720p_30fps_2lanes,
> +	 },
> +};
> +
> +#define N_RES_VIDEO (ARRAY_SIZE(ov5648_res_video))
> +
> +static struct ov5648_resolution *ov5648_res = ov5648_res_preview;
> +static int N_RES = N_RES_PREVIEW;
> +//static int has_otp = -1;	/*0:has valid otp, 1:no valid otp */
> +
> +#endif

-- 
Regards,

Sakari Ailus
e-mail: sakari.ailus at iki.fi


More information about the devel mailing list