[PATCH] [media] imx: csi: retain current field order and colorimetry setting as default
Hans Verkuil
hverkuil at xs4all.nl
Mon May 8 10:12:30 UTC 2017
On 05/08/2017 11:36 AM, Philipp Zabel wrote:
> Hi Hans,
>
> On Mon, 2017-05-08 at 10:27 +0200, Hans Verkuil wrote:
>> Hi Philipp,
>>
>> Sorry for the very long delay, but I finally had some time to think about this.
>
> Thank you for your thoughts.
>
>> On 04/06/2017 03:55 PM, Philipp Zabel wrote:
>>> If the the field order is set to ANY in set_fmt, choose the currently
>>> set field order. If the colorspace is set to DEFAULT, choose the current
>>> colorspace. If any of xfer_func, ycbcr_enc or quantization are set to
>>> DEFAULT, either choose the current setting, or the default setting for the
>>> new colorspace, if non-DEFAULT colorspace was given.
>>>
>>> This allows to let field order and colorimetry settings be propagated
>>> from upstream by calling media-ctl on the upstream entity source pad,
>>> and then call media-ctl on the sink pad to manually set the input frame
>>> interval, without changing the already set field order and colorimetry
>>> information.
>>>
>>> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
>>> ---
>>> This is based on imx-media-staging-md-v14, and it is supposed to allow
>>> configuring the pipeline with media-ctl like this:
>>>
>>> 1) media-ctl --set-v4l2 "'tc358743 1-000f':0[fmt:UYVY8_1X16/1920x1080]"
>>> 2) media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY8_1X16/1920x108]"
>>> 3) media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY8_1X16/1920x1080]"
>>> 4) media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY8_1X16/1920x1080 at 1/60]"
>>> 5) media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/1920x1080 at 1/30]"
>>>
>>> Without having step 4) overwrite the colorspace and field order set on
>>> 'ipu1_csi0':0 by the propagation in step 3).
>>> ---
>>> drivers/staging/media/imx/imx-media-csi.c | 34 +++++++++++++++++++++++++++++++
>>> 1 file changed, 34 insertions(+)
>>>
>>> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
>>> index 64dc454f6b371..d94ce1de2bf05 100644
>>> --- a/drivers/staging/media/imx/imx-media-csi.c
>>> +++ b/drivers/staging/media/imx/imx-media-csi.c
>>> @@ -1325,6 +1325,40 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
>>> csi_try_fmt(priv, sensor, cfg, sdformat, crop, compose, &cc);
>>>
>>> fmt = __csi_get_fmt(priv, cfg, sdformat->pad, sdformat->which);
>>> +
>>> + /* Retain current field setting as default */
>>> + if (sdformat->format.field == V4L2_FIELD_ANY)
>>> + sdformat->format.field = fmt->field;
>>
>> This is OK.
>
> Would this be a "may" or a "should"? As in,
> "If SUBDEV_S_FMT is called with field == ANY, the driver may/should set
> field to the previously configured interlacing field order".
To quote the FIELD_ANY documentation:
file:///home/hans/work/src/v4l/media-git/Documentation/output/html/uapi/v4l/field-order.html#field-order
"Drivers must never return V4L2_FIELD_ANY."
How a driver replaces FIELD_ANY is something that I am not sure should be explicitly
stated in the documentation. In many cases there is only one choice (usually FIELD_NONE).
In cases like this I think your proposed rule is a good recommendation. I would probably
phrase it like that.
> What would be the correct place to document this behaviour?
> Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst?
Yes.
>
>>> + /* Retain current colorspace setting as default */
>>> + if (sdformat->format.colorspace == V4L2_COLORSPACE_DEFAULT) {
>>> + sdformat->format.colorspace = fmt->colorspace;
>>> + if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT)
>>> + sdformat->format.xfer_func = fmt->xfer_func;
>>> + if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
>>> + sdformat->format.ycbcr_enc = fmt->ycbcr_enc;
>>> + if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT)
>>> + sdformat->format.quantization = fmt->quantization;
>>
>> If sdformat->format.colorspace == V4L2_COLORSPACE_DEFAULT, then you can just copy
>> all four fields from fmt to sdformat->format. The other three fields are meaningless
>> when colorspace == V4L2_COLORSPACE_DEFAULT.
>
> Ok, good. Ignoring the transfer function / YCbCr encoding / quantization
> range fields when colorspace is DEFAULT would simplify this part to:
>
> if (sdformat->format.colorspace == V4L2_COLORSPACE_DEFAULT) {
> sdformat->format.colorspace = fmt->colorspace;
> sdformat->format.xfer_func = fmt->xfer_func;
> sdformat->format.ycbcr_enc = fmt->ycbcr_enc;
> sdformat->format.quantization = fmt->quantization;
> }
>
> Is that expectation already written down somewhere? If not, should we
> add it to Documentation/media/uapi/v4l/pixfmt-006.rst?
I don't think it is written down. It would be a good idea to make this
explicit.
>
>>> + } else {
>>> + if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT) {
>>> + sdformat->format.xfer_func =
>>> + V4L2_MAP_XFER_FUNC_DEFAULT(
>>> + sdformat->format.colorspace);
>>> + }
>>> + if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) {
>>> + sdformat->format.ycbcr_enc =
>>> + V4L2_MAP_YCBCR_ENC_DEFAULT(
>>> + sdformat->format.colorspace);
>>> + }
>>> + if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT) {
>>> + sdformat->format.quantization =
>>> + V4L2_MAP_QUANTIZATION_DEFAULT(
>>> + cc->cs != IPUV3_COLORSPACE_YUV,
>>> + sdformat->format.colorspace,
>>> + sdformat->format.ycbcr_enc);
>>> + }
>>
>> Is this needed for validation? Currently these fields play no role in the
>> default link validation. Which I think is actually the right thing to do,
>> unless the subdev can do actual colorspace conversion.
>
> The CSI subdevice can't do colorspace conversion, but exactly the same
> applies to the IC subdevices, which can. Also I'd like this information
> to be correct, as the /dev/videoX capture device takes its colorspace
> information from the CSI source pad.
>
> The problem I wanted to solve here initially was that if the colorspace
> information was previously set correctly:
>
> media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY8_1X16/1920x1080 at 1/60 colorspace:rec709 xfer:709 ycbcr:709 quantization:lim-range]"
> ->
> V4L2_COLORSPACE_REC709
> V4L2_XFER_FUNC_709
> V4L2_YCBCR_ENC_709
> V4L2_QUANTIZATION_LIMITED_RANGE
>
> A later media-ctl call to just change the frame interval would overwrite the colorspace information:
>
> media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY8_1X16/1920x1080 at 1/30]"
> ->
> V4L2_COLORSPACE_DEFAULT
> V4L2_XFER_FUNC_DEFAULT
> V4L2_YCBCR_ENC_DEFAULT
> V4L2_QUANTIZATION_DEFAULT
Not anymore since if media-ctl sets colorspace to DEFAULT, then it will just copy
the last configuration.
If media-ctl sets colorspace to a non-DEFAULT value, then I assume that it is a
new explicitly defined colorspace.
>
>> I would just drop the whole 'else' here.
>
> That would allow to set the actual colorspace information reported by
> SUBDEV_G_FMT on both sink and source pads (and by extension, the
> colorspace information reported by G_FMT on /dev/videoX) to
> V4L2_{XFER_FUNC,YCBCR_ENC,QUANTIZATION}_DEFAULT.
>
> media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY8_1X16/1920x1080 colorspace:rec709]"
> ->
> V4L2_COLORSPACE_REC709
> V4L2_XFER_FUNC_DEFAULT
> V4L2_YCBCR_ENC_DEFAULT
> V4L2_QUANTIZATION_DEFAULT
>
> I suppose that is acceptable as given the colorspace, the other DEFAULT
> values have a unique meaning, but wouldn't it be nicer to show userspace
> what these default inputs actually map to?
Good question. Right now this isn't done in other drivers.
I have been struggling with this question myself. My problem is that I don't like
to have to copy this code in every driver. Ideally this should be handled in the
v4l2 core, but I am not sure if all the required information is available there.
I would postpone this, and look at this in a separate patch.
>> Actually, wouldn't it be better to always just copy this information from
>> fmt? This subdev doesn't do any colorspace conversion, it just passes on
>> this information. I.e., you can't set it in any meaningful way.
>
> csi_set_fmt on the sink pad is the function that actually sets fmt in
> the first place. If we always copy colorspace information from fmt, it
> can't be set to the correct value at all.
Yes, sorry about that. Ignore that comment.
Regards,
Hans
More information about the devel
mailing list