[PATCH 08/29] drivers, md: convert mddev.active from atomic_t to refcount_t
Reshetova, Elena
elena.reshetova at intel.com
Tue Mar 14 12:29:21 UTC 2017
> Elena Reshetova <elena.reshetova at intel.com> writes:
>
> > refcount_t type and corresponding API should be
> > used instead of atomic_t when the variable is used as
> > a reference counter. This allows to avoid accidental
> > refcounter overflows that might lead to use-after-free
> > situations.
> >
> > Signed-off-by: Elena Reshetova <elena.reshetova at intel.com>
> > Signed-off-by: Hans Liljestrand <ishkamiel at gmail.com>
> > Signed-off-by: Kees Cook <keescook at chromium.org>
> > Signed-off-by: David Windsor <dwindsor at gmail.com>
> > ---
> > drivers/md/md.c | 6 +++---
> > drivers/md/md.h | 3 ++-
> > 2 files changed, 5 insertions(+), 4 deletions(-)
>
> When booting linux-next (specifically 5be4921c9958ec) I'm seeing the
> backtrace below. I suspect this patch is just exposing an existing
> issue?
Yes, we have actually been following this issue in the another thread.
It looks like the object is re-used somehow, but I can't quite understand how just by reading the code.
This was what I put into the previous thread:
"The log below indicates that you are using your refcounter in a bit weird way in mddev_find().
However, I can't find the place (just by reading the code) where you would increment refcounter from zero (vs. setting it to one).
It looks like you either iterate over existing nodes (and increment their counters, which should be >= 1 at the time of increment) or create a new node, but then mddev_init() sets the counter to 1. "
If you can help to understand what is going on with the object creation/destruction, would be appreciated!
Also Shaohua Li stopped this patch coming from his tree since the issue was caught at that time, so we are not going to merge this until we figure it out.
Best Regards,
Elena.
>
> cheers
>
>
> [ 0.230738] md: Waiting for all devices to be available before autodetect
> [ 0.230742] md: If you don't use raid, use raid=noautodetect
> [ 0.230962] refcount_t: increment on 0; use-after-free.
> [ 0.230988] ------------[ cut here ]------------
> [ 0.230996] WARNING: CPU: 0 PID: 1 at lib/refcount.c:114
> .refcount_inc+0x5c/0x70
> [ 0.231001] Modules linked in:
> [ 0.231006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-gccN-next-
> 20170310-g5be4921 #1
> [ 0.231012] task: c000000049400000 task.stack: c000000049440000
> [ 0.231016] NIP: c0000000005ac6bc LR: c0000000005ac6b8 CTR:
> c000000000743390
> [ 0.231021] REGS: c000000049443160 TRAP: 0700 Not tainted (4.11.0-rc1-
> gccN-next-20170310-g5be4921)
> [ 0.231026] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>
> [ 0.231033] CR: 24024422 XER: 0000000c
> [ 0.231038] CFAR: c000000000a5356c SOFTE: 1
> [ 0.231038] GPR00: c0000000005ac6b8 c0000000494433e0 c000000001079d00
> 000000000000002b
> [ 0.231038] GPR04: 0000000000000000 00000000000000ef 0000000000000000
> c0000000010418a0
> [ 0.231038] GPR08: 000000004af80000 c000000000ecc9a8 c000000000ecc9a8
> 0000000000000000
> [ 0.231038] GPR12: 0000000028024824 c000000006bb0000 0000000000000000
> c000000049443a00
> [ 0.231038] GPR16: 0000000000000000 c000000049443a10 0000000000000000
> 0000000000000000
> [ 0.231038] GPR20: 0000000000000000 0000000000000000 c000000000f7dd20
> 0000000000000000
> [ 0.231038] GPR24: 00000000014080c0 c0000000012060b8 c000000001206080
> 0000000000000009
> [ 0.231038] GPR28: c000000000f7dde0 0000000000900000 0000000000000000
> c0000000461ae800
> [ 0.231100] NIP [c0000000005ac6bc] .refcount_inc+0x5c/0x70
> [ 0.231104] LR [c0000000005ac6b8] .refcount_inc+0x58/0x70
> [ 0.231108] Call Trace:
> [ 0.231112] [c0000000494433e0] [c0000000005ac6b8] .refcount_inc+0x58/0x70
> (unreliable)
> [ 0.231120] [c000000049443450] [c00000000086c008]
> .mddev_find+0x1e8/0x430
> [ 0.231125] [c000000049443530] [c000000000872b6c] .md_open+0x2c/0x140
> [ 0.231132] [c0000000494435c0] [c0000000003962a4]
> .__blkdev_get+0xd4/0x520
> [ 0.231138] [c000000049443690] [c000000000396cc0] .blkdev_get+0x1c0/0x4f0
> [ 0.231145] [c000000049443790] [c000000000336d64]
> .do_dentry_open.isra.1+0x2a4/0x410
> [ 0.231152] [c000000049443830] [c0000000003523f4]
> .path_openat+0x624/0x1580
> [ 0.231157] [c000000049443990] [c000000000354ce4]
> .do_filp_open+0x84/0x120
> [ 0.231163] [c000000049443b10] [c000000000338d74]
> .do_sys_open+0x214/0x300
> [ 0.231170] [c000000049443be0] [c000000000da69ac]
> .md_run_setup+0xa0/0xec
> [ 0.231176] [c000000049443c60] [c000000000da4fbc]
> .prepare_namespace+0x60/0x240
> [ 0.231182] [c000000049443ce0] [c000000000da47a8]
> .kernel_init_freeable+0x330/0x36c
> [ 0.231190] [c000000049443db0] [c00000000000dc44] .kernel_init+0x24/0x160
> [ 0.231197] [c000000049443e30] [c00000000000badc]
> .ret_from_kernel_thread+0x58/0x7c
> [ 0.231202] Instruction dump:
> [ 0.231206] 60000000 3d22ffee 89296bfb 2f890000 409effdc 3c62ffc6 39200001
> 3d42ffee
> [ 0.231216] 38630928 992a6bfb 484a6e79 60000000 <0fe00000> 4bffffb8
> 60000000 60000000
> [ 0.231226] ---[ end trace 8c51f269ad91ffc2 ]---
> [ 0.231233] md: Autodetecting RAID arrays.
> [ 0.231236] md: autorun ...
> [ 0.231239] md: ... autorun DONE.
> [ 0.234188] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
> [ 0.250506] refcount_t: underflow; use-after-free.
> [ 0.250531] ------------[ cut here ]------------
> [ 0.250537] WARNING: CPU: 0 PID: 3 at lib/refcount.c:207
> .refcount_dec_not_one+0x104/0x120
> [ 0.250542] Modules linked in:
> [ 0.250546] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G W 4.11.0-rc1-
> gccN-next-20170310-g5be4921 #1
> [ 0.250553] Workqueue: events .delayed_fput
> [ 0.250557] task: c000000049404900 task.stack: c000000049448000
> [ 0.250562] NIP: c0000000005ac964 LR: c0000000005ac960 CTR:
> c000000000743390
> [ 0.250567] REGS: c00000004944b530 TRAP: 0700 Tainted: G W (4.11.0-
> rc1-gccN-next-20170310-g5be4921)
> [ 0.250572] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>
> [ 0.250578] CR: 24002422 XER: 00000007
> [ 0.250584] CFAR: c000000000a5356c SOFTE: 1
> [ 0.250584] GPR00: c0000000005ac960 c00000004944b7b0 c000000001079d00
> 0000000000000026
> [ 0.250584] GPR04: 0000000000000000 0000000000000113 0000000000000000
> c0000000010418a0
> [ 0.250584] GPR08: 000000004af80000 c000000000ecc9a8 c000000000ecc9a8
> 0000000000000000
> [ 0.250584] GPR12: 0000000022002824 c000000006bb0000 c0000000001116d0
> c000000049050200
> [ 0.250584] GPR16: 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000
> [ 0.250584] GPR20: 0000000000000001 0000000000000000 c000000048030a98
> 0000000000000001
> [ 0.250584] GPR24: 000000000002001d 0000000000000000 0000000000000000
> c0000000461af000
> [ 0.250584] GPR28: 0000000000000000 c000000048030bd8 c0000000461aea08
> c0000000012060b8
> [ 0.250645] NIP [c0000000005ac964] .refcount_dec_not_one+0x104/0x120
> [ 0.250650] LR [c0000000005ac960] .refcount_dec_not_one+0x100/0x120
> [ 0.250654] Call Trace:
> [ 0.250658] [c00000004944b7b0] [c0000000005ac960]
> .refcount_dec_not_one+0x100/0x120 (unreliable)
> [ 0.250665] [c00000004944b820] [c0000000005ac9a0]
> .refcount_dec_and_lock+0x20/0xc0
> [ 0.250671] [c00000004944b8a0] [c000000000870fa4] .mddev_put+0x34/0x180
> [ 0.250677] [c00000004944b930] [c000000000396108]
> .__blkdev_put+0x288/0x350
> [ 0.250683] [c00000004944ba30] [c0000000003968f0] .blkdev_close+0x30/0x50
> [ 0.250689] [c00000004944bab0] [c00000000033e7d8] .__fput+0xc8/0x2a0
> [ 0.250695] [c00000004944bb60] [c00000000033ea08]
> .delayed_fput+0x58/0x80
> [ 0.250701] [c00000004944bbe0] [c000000000107ea0]
> .process_one_work+0x2a0/0x630
> [ 0.250707] [c00000004944bc80] [c0000000001082c8]
> .worker_thread+0x98/0x6a0
> [ 0.250713] [c00000004944bd70] [c000000000111868] .kthread+0x198/0x1a0
> [ 0.250719] [c00000004944be30] [c00000000000badc]
> .ret_from_kernel_thread+0x58/0x7c
> [ 0.250724] Instruction dump:
> [ 0.250728] 419e000c 38210070 4e800020 7c0802a6 3c62ffc6 39200001
> 3d42ffee 38630958
> [ 0.250738] 992a6bfe f8010080 484a6bd1 60000000 <0fe00000> e8010080
> 38600001 7c0803a6
> [ 0.250748] ---[ end trace 8c51f269ad91ffc3 ]---
> [ 0.262454] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
> (null)
More information about the devel
mailing list