[PATCH net-next v2 10/10] netvsc: remove bonding setup script

Stephen Hemminger stephen at networkplumber.org
Wed Jul 26 23:40:29 UTC 2017


No longer needed, now all managed by transparent VF logic.

Signed-off-by: Stephen Hemminger <sthemmin at microsoft.com>
---
 tools/hv/bondvf.sh | 255 -----------------------------------------------------
 1 file changed, 255 deletions(-)
 delete mode 100755 tools/hv/bondvf.sh

diff --git a/tools/hv/bondvf.sh b/tools/hv/bondvf.sh
deleted file mode 100755
index 80f102860cf8..000000000000
--- a/tools/hv/bondvf.sh
+++ /dev/null
@@ -1,255 +0,0 @@
-#!/bin/bash
-
-# This example script creates bonding network devices based on synthetic NIC
-# (the virtual network adapter usually provided by Hyper-V) and the matching
-# VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can
-# function as one network device, and fail over to the synthetic NIC if VF is
-# down.
-#
-# Usage:
-# - After configured vSwitch and vNIC with SRIOV, start Linux virtual
-#   machine (VM)
-# - Run this scripts on the VM. It will create configuration files in
-#   distro specific directory.
-# - Reboot the VM, so that the bonding config are enabled.
-#
-# The config files are DHCP by default. You may edit them if you need to change
-# to Static IP or change other settings.
-#
-
-sysdir=/sys/class/net
-netvsc_cls={f8615163-df3e-46c5-913f-f2d2f965ed0e}
-bondcnt=0
-
-# Detect Distro
-if [ -f /etc/redhat-release ];
-then
-	cfgdir=/etc/sysconfig/network-scripts
-	distro=redhat
-elif grep -q 'Ubuntu' /etc/issue
-then
-	cfgdir=/etc/network
-	distro=ubuntu
-elif grep -q 'SUSE' /etc/issue
-then
-	cfgdir=/etc/sysconfig/network
-	distro=suse
-else
-	echo "Unsupported Distro"
-	exit 1
-fi
-
-echo Detected Distro: $distro, or compatible
-
-# Get a list of ethernet names
-list_eth=(`cd $sysdir && ls -d */ | cut -d/ -f1 | grep -v bond`)
-eth_cnt=${#list_eth[@]}
-
-echo List of net devices:
-
-# Get the MAC addresses
-for (( i=0; i < $eth_cnt; i++ ))
-do
-	list_mac[$i]=`cat $sysdir/${list_eth[$i]}/address`
-	echo ${list_eth[$i]}, ${list_mac[$i]}
-done
-
-# Find NIC with matching MAC
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
-	for (( j=i+1; j < $eth_cnt; j++ ))
-	do
-		if [ "${list_mac[$i]}" = "${list_mac[$j]}" ]
-		then
-			list_match[$i]=${list_eth[$j]}
-			break
-		fi
-	done
-done
-
-function create_eth_cfg_redhat {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo DEVICE=$1 >>$fn
-	echo TYPE=Ethernet >>$fn
-	echo BOOTPROTO=none >>$fn
-	echo UUID=`uuidgen` >>$fn
-	echo ONBOOT=yes >>$fn
-	echo PEERDNS=yes >>$fn
-	echo IPV6INIT=yes >>$fn
-	echo MASTER=$2 >>$fn
-	echo SLAVE=yes >>$fn
-}
-
-function create_eth_cfg_pri_redhat {
-	create_eth_cfg_redhat $1 $2
-}
-
-function create_bond_cfg_redhat {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo DEVICE=$1 >>$fn
-	echo TYPE=Bond >>$fn
-	echo BOOTPROTO=dhcp >>$fn
-	echo UUID=`uuidgen` >>$fn
-	echo ONBOOT=yes >>$fn
-	echo PEERDNS=yes >>$fn
-	echo IPV6INIT=yes >>$fn
-	echo BONDING_MASTER=yes >>$fn
-	echo BONDING_OPTS=\"mode=active-backup miimon=100 primary=$2\" >>$fn
-}
-
-function del_eth_cfg_ubuntu {
-	local mainfn=$cfgdir/interfaces
-	local fnlist=( $mainfn )
-
-	local dirlist=(`awk '/^[ \t]*source/{print $2}' $mainfn`)
-
-	local i
-	for i in "${dirlist[@]}"
-	do
-		fnlist+=(`ls $i 2>/dev/null`)
-	done
-
-	local tmpfl=$(mktemp)
-
-	local nic_start='^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+'$1
-	local nic_end='^[ \t]*(auto|iface|mapping|allow-.*|source)'
-
-	local fn
-	for fn in "${fnlist[@]}"
-	do
-		awk "/$nic_end/{x=0} x{next} /$nic_start/{x=1;next} 1" \
-			$fn >$tmpfl
-
-		cp $tmpfl $fn
-	done
-
-	rm $tmpfl
-}
-
-function create_eth_cfg_ubuntu {
-	local fn=$cfgdir/interfaces
-
-	del_eth_cfg_ubuntu $1
-	echo $'\n'auto $1 >>$fn
-	echo iface $1 inet manual >>$fn
-	echo bond-master $2 >>$fn
-}
-
-function create_eth_cfg_pri_ubuntu {
-	local fn=$cfgdir/interfaces
-
-	del_eth_cfg_ubuntu $1
-	echo $'\n'allow-hotplug $1 >>$fn
-	echo iface $1 inet manual >>$fn
-	echo bond-master $2 >>$fn
-	echo bond-primary $1 >>$fn
-}
-
-function create_bond_cfg_ubuntu {
-	local fn=$cfgdir/interfaces
-
-	del_eth_cfg_ubuntu $1
-
-	echo $'\n'auto $1 >>$fn
-	echo iface $1 inet dhcp >>$fn
-	echo bond-mode active-backup >>$fn
-	echo bond-miimon 100 >>$fn
-	echo bond-slaves none >>$fn
-}
-
-function create_eth_cfg_suse {
-        local fn=$cfgdir/ifcfg-$1
-
-        rm -f $fn
-	echo BOOTPROTO=none >>$fn
-	echo STARTMODE=auto >>$fn
-}
-
-function create_eth_cfg_pri_suse {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo BOOTPROTO=none >>$fn
-	echo STARTMODE=hotplug >>$fn
-}
-
-function create_bond_cfg_suse {
-	local fn=$cfgdir/ifcfg-$1
-
-	rm -f $fn
-	echo BOOTPROTO=dhcp >>$fn
-	echo STARTMODE=auto >>$fn
-	echo BONDING_MASTER=yes >>$fn
-	echo BONDING_SLAVE_0=$2 >>$fn
-	echo BONDING_SLAVE_1=$3 >>$fn
-	echo BONDING_MODULE_OPTS=\'mode=active-backup miimon=100 primary=$2\' >>$fn
-}
-
-function create_bond {
-	local bondname=bond$bondcnt
-	local primary
-	local secondary
-
-	local class_id1=`cat $sysdir/$1/device/class_id 2>/dev/null`
-	local class_id2=`cat $sysdir/$2/device/class_id 2>/dev/null`
-
-	if [ "$class_id1" = "$netvsc_cls" ]
-	then
-		primary=$2
-		secondary=$1
-	elif [ "$class_id2" = "$netvsc_cls" ]
-	then
-		primary=$1
-		secondary=$2
-	else
-		return 0
-	fi
-
-	echo $'\nBond name:' $bondname
-
-	if [ $distro == ubuntu ]
-	then
-		local mainfn=$cfgdir/interfaces
-		local s="^[ \t]*(auto|iface|mapping|allow-.*)[ \t]+${bondname}"
-
-		grep -E "$s" $mainfn
-		if [ $? -eq 0 ]
-		then
-			echo "WARNING: ${bondname} has been configured already"
-			return
-		fi
-	elif [ $distro == redhat ] || [ $distro == suse ]
-	then
-		local fn=$cfgdir/ifcfg-$bondname
-		if [ -f $fn ]
-		then
-			echo "WARNING: ${bondname} has been configured already"
-			return
-		fi
-	else
-		echo "Unsupported Distro: ${distro}"
-		return
-	fi
-
-	echo configuring $primary
-	create_eth_cfg_pri_$distro $primary $bondname
-
-	echo configuring $secondary
-	create_eth_cfg_$distro $secondary $bondname
-
-	echo creating: $bondname with primary slave: $primary
-	create_bond_cfg_$distro $bondname $primary $secondary
-}
-
-for (( i=0; i < $eth_cnt-1; i++ ))
-do
-        if [ -n "${list_match[$i]}" ]
-        then
-		create_bond ${list_eth[$i]} ${list_match[$i]}
-		let bondcnt=bondcnt+1
-        fi
-done
-- 
2.11.0



More information about the devel mailing list