[PATCH v9 07/10] hyper-v: globalize vp_index
Vitaly Kuznetsov
vkuznets at redhat.com
Fri Jul 14 12:44:39 UTC 2017
To support implementing remote TLB flushing on Hyper-V with a hypercall
we need to make vp_index available outside of vmbus module. Rename and
globalize.
Signed-off-by: Vitaly Kuznetsov <vkuznets at redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
Reviewed-by: Stephen Hemminger <sthemmin at microsoft.com>
---
arch/x86/hyperv/hv_init.c | 34 +++++++++++++++++++++++++-
arch/x86/include/asm/mshyperv.h | 24 ++++++++++++++++++
drivers/hv/channel_mgmt.c | 7 +++---
drivers/hv/connection.c | 3 ++-
drivers/hv/hv.c | 9 -------
drivers/hv/hyperv_vmbus.h | 11 ---------
drivers/hv/vmbus_drv.c | 17 -------------
drivers/pci/host/pci-hyperv.c | 54 +++--------------------------------------
include/linux/hyperv.h | 1 -
9 files changed, 65 insertions(+), 95 deletions(-)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 691603ee9179..e93b9a0b1b10 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -26,6 +26,8 @@
#include <linux/mm.h>
#include <linux/clockchips.h>
#include <linux/hyperv.h>
+#include <linux/slab.h>
+#include <linux/cpuhotplug.h>
#ifdef CONFIG_HYPERV_TSCPAGE
@@ -80,6 +82,20 @@ EXPORT_SYMBOL_GPL(hv_hypercall_pg);
struct clocksource *hyperv_cs;
EXPORT_SYMBOL_GPL(hyperv_cs);
+u32 *hv_vp_index;
+EXPORT_SYMBOL_GPL(hv_vp_index);
+
+static int hv_cpu_init(unsigned int cpu)
+{
+ u64 msr_vp_index;
+
+ hv_get_vp_index(msr_vp_index);
+
+ hv_vp_index[smp_processor_id()] = msr_vp_index;
+
+ return 0;
+}
+
/*
* This function is to be invoked early in the boot sequence after the
* hypervisor has been detected.
@@ -95,6 +111,16 @@ void hyperv_init(void)
if (x86_hyper != &x86_hyper_ms_hyperv)
return;
+ /* Allocate percpu VP index */
+ hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
+ GFP_KERNEL);
+ if (!hv_vp_index)
+ return;
+
+ if (cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/hyperv_init:online",
+ hv_cpu_init, NULL) < 0)
+ goto free_vp_index;
+
/*
* Setup the hypercall page and enable hypercalls.
* 1. Register the guest ID
@@ -106,7 +132,7 @@ void hyperv_init(void)
hv_hypercall_pg = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL_RX);
if (hv_hypercall_pg == NULL) {
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
- return;
+ goto free_vp_index;
}
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
@@ -149,6 +175,12 @@ void hyperv_init(void)
hyperv_cs = &hyperv_cs_msr;
if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+
+ return;
+
+free_vp_index:
+ kfree(hv_vp_index);
+ hv_vp_index = NULL;
}
/*
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 47cec5b3f3d9..574cfc438ee8 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -283,6 +283,30 @@ static inline u64 hv_do_rep_hypercall(u16 code, u16 rep_count, u16 varhead_size,
return status;
}
+/*
+ * Hypervisor's notion of virtual processor ID is different from
+ * Linux' notion of CPU ID. This information can only be retrieved
+ * in the context of the calling CPU. Setup a map for easy access
+ * to this information.
+ */
+extern u32 *hv_vp_index;
+
+/**
+ * hv_cpu_number_to_vp_number() - Map CPU to VP.
+ * @cpu_number: CPU number in Linux terms
+ *
+ * This function returns the mapping between the Linux processor
+ * number and the hypervisor's virtual processor number, useful
+ * in making hypercalls and such that talk about specific
+ * processors.
+ *
+ * Return: Virtual processor number in Hyper-V terms
+ */
+static inline int hv_cpu_number_to_vp_number(int cpu_number)
+{
+ return hv_vp_index[cpu_number];
+}
+
void hyperv_init(void);
void hyperv_report_panic(struct pt_regs *regs);
bool hv_is_hypercall_page_setup(void);
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index fd2b6c67f781..dc590195a74e 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -599,7 +599,7 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
*/
channel->numa_node = 0;
channel->target_cpu = 0;
- channel->target_vp = hv_context.vp_index[0];
+ channel->target_vp = hv_cpu_number_to_vp_number(0);
return;
}
@@ -683,7 +683,7 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
}
channel->target_cpu = cur_cpu;
- channel->target_vp = hv_context.vp_index[cur_cpu];
+ channel->target_vp = hv_cpu_number_to_vp_number(cur_cpu);
}
static void vmbus_wait_for_unload(void)
@@ -1219,8 +1219,7 @@ struct vmbus_channel *vmbus_get_outgoing_channel(struct vmbus_channel *primary)
return outgoing_channel;
}
- cur_cpu = hv_context.vp_index[get_cpu()];
- put_cpu();
+ cur_cpu = hv_cpu_number_to_vp_number(smp_processor_id());
list_for_each_safe(cur, tmp, &primary->sc_list) {
cur_channel = list_entry(cur, struct vmbus_channel, sc_list);
if (cur_channel->state != CHANNEL_OPENED_STATE)
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index 37ecf514189e..f41901f80b64 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -96,7 +96,8 @@ static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo,
* the CPU attempting to connect may not be CPU 0.
*/
if (version >= VERSION_WIN8_1) {
- msg->target_vcpu = hv_context.vp_index[smp_processor_id()];
+ msg->target_vcpu =
+ hv_cpu_number_to_vp_number(smp_processor_id());
vmbus_connection.connect_cpu = smp_processor_id();
} else {
msg->target_vcpu = 0;
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 2ea12207caa0..8267439dd1ee 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -234,7 +234,6 @@ int hv_synic_init(unsigned int cpu)
union hv_synic_siefp siefp;
union hv_synic_sint shared_sint;
union hv_synic_scontrol sctrl;
- u64 vp_index;
/* Setup the Synic's message page */
hv_get_simp(simp.as_uint64);
@@ -276,14 +275,6 @@ int hv_synic_init(unsigned int cpu)
hv_context.synic_initialized = true;
/*
- * Setup the mapping between Hyper-V's notion
- * of cpuid and Linux' notion of cpuid.
- * This array will be indexed using Linux cpuid.
- */
- hv_get_vp_index(vp_index);
- hv_context.vp_index[cpu] = (u32)vp_index;
-
- /*
* Register the per-cpu clockevent source.
*/
if (ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE)
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 1b6a5e0dfa75..49569f8fe038 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -229,17 +229,6 @@ struct hv_context {
struct hv_per_cpu_context __percpu *cpu_context;
/*
- * Hypervisor's notion of virtual processor ID is different from
- * Linux' notion of CPU ID. This information can only be retrieved
- * in the context of the calling CPU. Setup a map for easy access
- * to this information:
- *
- * vp_index[a] is the Hyper-V's processor ID corresponding to
- * Linux cpuid 'a'.
- */
- u32 vp_index[NR_CPUS];
-
- /*
* To manage allocations in a NUMA node.
* Array indexed by numa node ID.
*/
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index ed84e96715a0..c7e7d6db2d21 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1451,23 +1451,6 @@ void vmbus_free_mmio(resource_size_t start, resource_size_t size)
}
EXPORT_SYMBOL_GPL(vmbus_free_mmio);
-/**
- * vmbus_cpu_number_to_vp_number() - Map CPU to VP.
- * @cpu_number: CPU number in Linux terms
- *
- * This function returns the mapping between the Linux processor
- * number and the hypervisor's virtual processor number, useful
- * in making hypercalls and such that talk about specific
- * processors.
- *
- * Return: Virtual processor number in Hyper-V terms
- */
-int vmbus_cpu_number_to_vp_number(int cpu_number)
-{
- return hv_context.vp_index[cpu_number];
-}
-EXPORT_SYMBOL_GPL(vmbus_cpu_number_to_vp_number);
-
static int vmbus_acpi_add(struct acpi_device *device)
{
acpi_status result;
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 415dcc69a502..aba041438566 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -562,52 +562,6 @@ static void put_pcichild(struct hv_pci_dev *hv_pcidev,
static void get_hvpcibus(struct hv_pcibus_device *hv_pcibus);
static void put_hvpcibus(struct hv_pcibus_device *hv_pcibus);
-
-/*
- * Temporary CPU to vCPU mapping to address transitioning
- * vmbus_cpu_number_to_vp_number() being migrated to
- * hv_cpu_number_to_vp_number() in a separate patch. Once that patch
- * has been picked up in the main line, remove this code here and use
- * the official code.
- */
-static struct hv_tmpcpumap
-{
- bool initialized;
- u32 vp_index[NR_CPUS];
-} hv_tmpcpumap;
-
-static void hv_tmpcpumap_init_cpu(void *_unused)
-{
- int cpu = smp_processor_id();
- u64 vp_index;
-
- hv_get_vp_index(vp_index);
-
- hv_tmpcpumap.vp_index[cpu] = vp_index;
-}
-
-static void hv_tmpcpumap_init(void)
-{
- if (hv_tmpcpumap.initialized)
- return;
-
- memset(hv_tmpcpumap.vp_index, -1, sizeof(hv_tmpcpumap.vp_index));
- on_each_cpu(hv_tmpcpumap_init_cpu, NULL, true);
- hv_tmpcpumap.initialized = true;
-}
-
-/**
- * hv_tmp_cpu_nr_to_vp_nr() - Convert Linux CPU nr to Hyper-V vCPU nr
- *
- * Remove once vmbus_cpu_number_to_vp_number() has been converted to
- * hv_cpu_number_to_vp_number() and replace callers appropriately.
- */
-static u32 hv_tmp_cpu_nr_to_vp_nr(int cpu)
-{
- return hv_tmpcpumap.vp_index[cpu];
-}
-
-
/**
* devfn_to_wslot() - Convert from Linux PCI slot to Windows
* @devfn: The Linux representation of PCI slot
@@ -971,7 +925,7 @@ static void hv_irq_unmask(struct irq_data *data)
var_size = 1 + HV_VP_SET_BANK_COUNT_MAX;
for_each_cpu_and(cpu, dest, cpu_online_mask) {
- cpu_vmbus = hv_tmp_cpu_nr_to_vp_nr(cpu);
+ cpu_vmbus = hv_cpu_number_to_vp_number(cpu);
if (cpu_vmbus >= HV_VP_SET_BANK_COUNT_MAX * 64) {
dev_err(&hbus->hdev->device,
@@ -986,7 +940,7 @@ static void hv_irq_unmask(struct irq_data *data)
} else {
for_each_cpu_and(cpu, dest, cpu_online_mask) {
params->int_target.vp_mask |=
- (1ULL << hv_tmp_cpu_nr_to_vp_nr(cpu));
+ (1ULL << hv_cpu_number_to_vp_number(cpu));
}
}
@@ -1063,7 +1017,7 @@ static u32 hv_compose_msi_req_v2(
*/
cpu = cpumask_first_and(affinity, cpu_online_mask);
int_pkt->int_desc.processor_array[0] =
- hv_tmp_cpu_nr_to_vp_nr(cpu);
+ hv_cpu_number_to_vp_number(cpu);
int_pkt->int_desc.processor_count = 1;
return sizeof(*int_pkt);
@@ -2490,8 +2444,6 @@ static int hv_pci_probe(struct hv_device *hdev,
return -ENOMEM;
hbus->state = hv_pcibus_init;
- hv_tmpcpumap_init();
-
/*
* The PCI bus "domain" is what is called "segment" in ACPI and
* other specs. Pull it from the instance ID, to get something
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index c472bd43bdd7..e2a4fa57f110 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1173,7 +1173,6 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj,
resource_size_t size, resource_size_t align,
bool fb_overlap_ok);
void vmbus_free_mmio(resource_size_t start, resource_size_t size);
-int vmbus_cpu_number_to_vp_number(int cpu_number);
/*
* GUID definitions of various offer types - services offered to the guest.
--
2.13.0
More information about the devel
mailing list