[PATCH v3 13/24] platform: add video-multiplexer subdevice driver

Rob Herring robh at kernel.org
Tue Jan 10 05:35:35 UTC 2017


On Fri, Jan 06, 2017 at 06:11:31PM -0800, Steve Longerbeam wrote:
> From: Philipp Zabel <p.zabel at pengutronix.de>
> 
> This driver can handle SoC internal and external video bus multiplexers,
> controlled either by register bit fields or by a GPIO. The subdevice
> passes through frame interval and mbus configuration of the active input
> to the output side.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> 
> --
> 
> - fixed a cut&paste error in vidsw_remove(): v4l2_async_register_subdev()
>   should be unregister.
> 
> - added media_entity_cleanup() and v4l2_device_unregister_subdev()
>   to vidsw_remove().
> 
> - there was a line left over from a previous iteration that negated
>   the new way of determining the pad count just before it which
>   has been removed (num_pads = of_get_child_count(np)).
> 
> - Philipp Zabel has developed a set of patches that allow adding
>   to the subdev async notifier waiting list using a chaining method
>   from the async registered callbacks (v4l2_of_subdev_registered()
>   and the prep patches for that). For now, I've removed the use of
>   v4l2_of_subdev_registered() for the vidmux driver's registered
>   callback. This doesn't affect the functionality of this driver,
>   but allows for it to be merged now, before adding the chaining
>   support.
> 
> Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
> ---
>  .../bindings/media/video-multiplexer.txt           |  59 +++
>  drivers/media/platform/Kconfig                     |   8 +
>  drivers/media/platform/Makefile                    |   2 +
>  drivers/media/platform/video-multiplexer.c         | 472 +++++++++++++++++++++
>  4 files changed, 541 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/video-multiplexer.txt
>  create mode 100644 drivers/media/platform/video-multiplexer.c
> 
> diff --git a/Documentation/devicetree/bindings/media/video-multiplexer.txt b/Documentation/devicetree/bindings/media/video-multiplexer.txt
> new file mode 100644
> index 0000000..9d133d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/video-multiplexer.txt
> @@ -0,0 +1,59 @@
> +Video Multiplexer
> +=================
> +
> +Video multiplexers allow to select between multiple input ports. Video received
> +on the active input port is passed through to the output port. Muxes described
> +by this binding may be controlled by a syscon register bitfield or by a GPIO.
> +
> +Required properties:
> +- compatible : should be "video-multiplexer"

This should have an SoC/chip specific compatible string additionally. 
Just need a note to that effect here, but i.MX will need a compat 
string.

> +- reg: should be register base of the register containing the control bitfield
> +- bit-mask: bitmask of the control bitfield in the control register
> +- bit-shift: bit offset of the control bitfield in the control register
> +- gpios: alternatively to reg, bit-mask, and bit-shift, a single GPIO phandle
> +  may be given to switch between two inputs
> +- #address-cells: should be <1>
> +- #size-cells: should be <0>
> +- port@*: at least three port nodes containing endpoints connecting to the
> +  source and sink devices according to of_graph bindings. The last port is
> +  the output port, all others are inputs.


More information about the devel mailing list