[PATCH v2] staging: iio: accel: Move header file content to source file
SIMRAN SINGHAL
singhalsimran0 at gmail.com
Tue Feb 28 19:32:39 UTC 2017
On Wed, Mar 1, 2017 at 12:53 AM, Jonathan Cameron <jic23 at kernel.org> wrote:
> On 28/02/17 19:17, Jonathan Cameron wrote:
>> On 28/02/17 18:51, simran singhal wrote:
>>> The contents of the header file are used only by this single
>>> source file. Move content into .c and remove .h.
>>>
>>> Signed-off-by: simran singhal <singhalsimran0 at gmail.com>
>> Applied to the togreg branch of iio.git and pushed out as testing
>> for the autobuilders to play with it.
>>
>> Thanks,
>>
>> Jonathan
>
> One quick note:
>
> The title should include the name of the driver being modified
> as this is probably the bit interested people are most likely
> to pick up on in a long list of patches.
>
> I fixed this up. Thanks,
>
> Jonathan
I have included the name of driver being modified.
Due to want me to include the name of file i.e adis16201_core.c
>>> ---
>>>
>>> v2:
>>> -Removing ifndef and define
>>>
>>> drivers/staging/iio/accel/adis16201.h | 144 -----------------------------
>>> drivers/staging/iio/accel/adis16201_core.c | 142 +++++++++++++++++++++++++++-
>>> 2 files changed, 141 insertions(+), 145 deletions(-)
>>> delete mode 100644 drivers/staging/iio/accel/adis16201.h
>>>
>>> diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
>>> deleted file mode 100644
>>> index 64844ad..0000000
>>> --- a/drivers/staging/iio/accel/adis16201.h
>>> +++ /dev/null
>>> @@ -1,144 +0,0 @@
>>> -#ifndef SPI_ADIS16201_H_
>>> -#define SPI_ADIS16201_H_
>>> -
>>> -#define ADIS16201_STARTUP_DELAY 220 /* ms */
>>> -
>>> -/* Flash memory write count */
>>> -#define ADIS16201_FLASH_CNT 0x00
>>> -
>>> -/* Output, power supply */
>>> -#define ADIS16201_SUPPLY_OUT 0x02
>>> -
>>> -/* Output, x-axis accelerometer */
>>> -#define ADIS16201_XACCL_OUT 0x04
>>> -
>>> -/* Output, y-axis accelerometer */
>>> -#define ADIS16201_YACCL_OUT 0x06
>>> -
>>> -/* Output, auxiliary ADC input */
>>> -#define ADIS16201_AUX_ADC 0x08
>>> -
>>> -/* Output, temperature */
>>> -#define ADIS16201_TEMP_OUT 0x0A
>>> -
>>> -/* Output, x-axis inclination */
>>> -#define ADIS16201_XINCL_OUT 0x0C
>>> -
>>> -/* Output, y-axis inclination */
>>> -#define ADIS16201_YINCL_OUT 0x0E
>>> -
>>> -/* Calibration, x-axis acceleration offset */
>>> -#define ADIS16201_XACCL_OFFS 0x10
>>> -
>>> -/* Calibration, y-axis acceleration offset */
>>> -#define ADIS16201_YACCL_OFFS 0x12
>>> -
>>> -/* x-axis acceleration scale factor */
>>> -#define ADIS16201_XACCL_SCALE 0x14
>>> -
>>> -/* y-axis acceleration scale factor */
>>> -#define ADIS16201_YACCL_SCALE 0x16
>>> -
>>> -/* Calibration, x-axis inclination offset */
>>> -#define ADIS16201_XINCL_OFFS 0x18
>>> -
>>> -/* Calibration, y-axis inclination offset */
>>> -#define ADIS16201_YINCL_OFFS 0x1A
>>> -
>>> -/* x-axis inclination scale factor */
>>> -#define ADIS16201_XINCL_SCALE 0x1C
>>> -
>>> -/* y-axis inclination scale factor */
>>> -#define ADIS16201_YINCL_SCALE 0x1E
>>> -
>>> -/* Alarm 1 amplitude threshold */
>>> -#define ADIS16201_ALM_MAG1 0x20
>>> -
>>> -/* Alarm 2 amplitude threshold */
>>> -#define ADIS16201_ALM_MAG2 0x22
>>> -
>>> -/* Alarm 1, sample period */
>>> -#define ADIS16201_ALM_SMPL1 0x24
>>> -
>>> -/* Alarm 2, sample period */
>>> -#define ADIS16201_ALM_SMPL2 0x26
>>> -
>>> -/* Alarm control */
>>> -#define ADIS16201_ALM_CTRL 0x28
>>> -
>>> -/* Auxiliary DAC data */
>>> -#define ADIS16201_AUX_DAC 0x30
>>> -
>>> -/* General-purpose digital input/output control */
>>> -#define ADIS16201_GPIO_CTRL 0x32
>>> -
>>> -/* Miscellaneous control */
>>> -#define ADIS16201_MSC_CTRL 0x34
>>> -
>>> -/* Internal sample period (rate) control */
>>> -#define ADIS16201_SMPL_PRD 0x36
>>> -
>>> -/* Operation, filter configuration */
>>> -#define ADIS16201_AVG_CNT 0x38
>>> -
>>> -/* Operation, sleep mode control */
>>> -#define ADIS16201_SLP_CNT 0x3A
>>> -
>>> -/* Diagnostics, system status register */
>>> -#define ADIS16201_DIAG_STAT 0x3C
>>> -
>>> -/* Operation, system command register */
>>> -#define ADIS16201_GLOB_CMD 0x3E
>>> -
>>> -/* MSC_CTRL */
>>> -
>>> -/* Self-test enable */
>>> -#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
>>> -
>>> -/* Data-ready enable: 1 = enabled, 0 = disabled */
>>> -#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
>>> -
>>> -/* Data-ready polarity: 1 = active high, 0 = active low */
>>> -#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
>>> -
>>> -/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
>>> -#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
>>> -
>>> -/* DIAG_STAT */
>>> -
>>> -/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
>>> -#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
>>> -
>>> -/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
>>> -#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
>>> -
>>> -/* SPI communications failure */
>>> -#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
>>> -
>>> -/* Flash update failure */
>>> -#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
>>> -
>>> -/* Power supply above 3.625 V */
>>> -#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
>>> -
>>> -/* Power supply below 3.15 V */
>>> -#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
>>> -
>>> -/* GLOB_CMD */
>>> -
>>> -#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
>>> -#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
>>> -
>>> -#define ADIS16201_ERROR_ACTIVE BIT(14)
>>> -
>>> -enum adis16201_scan {
>>> - ADIS16201_SCAN_ACC_X,
>>> - ADIS16201_SCAN_ACC_Y,
>>> - ADIS16201_SCAN_INCLI_X,
>>> - ADIS16201_SCAN_INCLI_Y,
>>> - ADIS16201_SCAN_SUPPLY,
>>> - ADIS16201_SCAN_AUX_ADC,
>>> - ADIS16201_SCAN_TEMP,
>>> -};
>>> -
>>> -#endif /* SPI_ADIS16201_H_ */
>>> diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
>>> index 7963d4a..dcf8463 100644
>>> --- a/drivers/staging/iio/accel/adis16201_core.c
>>> +++ b/drivers/staging/iio/accel/adis16201_core.c
>>> @@ -20,7 +20,147 @@
>>> #include <linux/iio/buffer.h>
>>> #include <linux/iio/imu/adis.h>
>>>
>>> -#include "adis16201.h"
>>> +#define ADIS16201_STARTUP_DELAY 220 /* ms */
>>> +
>>> +/* Flash memory write count */
>>> +#define ADIS16201_FLASH_CNT 0x00
>>> +
>>> +/* Output, power supply */
>>> +#define ADIS16201_SUPPLY_OUT 0x02
>>> +
>>> +/* Output, x-axis accelerometer */
>>> +#define ADIS16201_XACCL_OUT 0x04
>>> +
>>> +/* Output, y-axis accelerometer */
>>> +#define ADIS16201_YACCL_OUT 0x06
>>> +
>>> +/* Output, auxiliary ADC input */
>>> +#define ADIS16201_AUX_ADC 0x08
>>> +
>>> +/* Output, temperature */
>>> +#define ADIS16201_TEMP_OUT 0x0A
>>> +
>>> +/* Output, x-axis inclination */
>>> +#define ADIS16201_XINCL_OUT 0x0C
>>> +
>>> +/* Output, y-axis inclination */
>>> +#define ADIS16201_YINCL_OUT 0x0E
>>> +
>>> +/* Calibration, x-axis acceleration offset */
>>> +#define ADIS16201_XACCL_OFFS 0x10
>>> +
>>> +/* Calibration, y-axis acceleration offset */
>>> +#define ADIS16201_YACCL_OFFS 0x12
>>> +
>>> +/* x-axis acceleration scale factor */
>>> +#define ADIS16201_XACCL_SCALE 0x14
>>> +
>>> +/* y-axis acceleration scale factor */
>>> +#define ADIS16201_YACCL_SCALE 0x16
>>> +
>>> +/* Calibration, x-axis inclination offset */
>>> +#define ADIS16201_XINCL_OFFS 0x18
>>> +
>>> +/* Calibration, y-axis inclination offset */
>>> +#define ADIS16201_YINCL_OFFS 0x1A
>>> +
>>> +/* x-axis inclination scale factor */
>>> +#define ADIS16201_XINCL_SCALE 0x1C
>>> +
>>> +/* y-axis inclination scale factor */
>>> +#define ADIS16201_YINCL_SCALE 0x1E
>>> +
>>> +/* Alarm 1 amplitude threshold */
>>> +#define ADIS16201_ALM_MAG1 0x20
>>> +
>>> +/* Alarm 2 amplitude threshold */
>>> +#define ADIS16201_ALM_MAG2 0x22
>>> +
>>> +/* Alarm 1, sample period */
>>> +#define ADIS16201_ALM_SMPL1 0x24
>>> +
>>> +/* Alarm 2, sample period */
>>> +#define ADIS16201_ALM_SMPL2 0x26
>>> +
>>> +/* Alarm control */
>>> +#define ADIS16201_ALM_CTRL 0x28
>>> +
>>> +/* Auxiliary DAC data */
>>> +#define ADIS16201_AUX_DAC 0x30
>>> +
>>> +/* General-purpose digital input/output control */
>>> +#define ADIS16201_GPIO_CTRL 0x32
>>> +
>>> +/* Miscellaneous control */
>>> +#define ADIS16201_MSC_CTRL 0x34
>>> +
>>> +/* Internal sample period (rate) control */
>>> +#define ADIS16201_SMPL_PRD 0x36
>>> +
>>> +/* Operation, filter configuration */
>>> +#define ADIS16201_AVG_CNT 0x38
>>> +
>>> +/* Operation, sleep mode control */
>>> +#define ADIS16201_SLP_CNT 0x3A
>>> +
>>> +/* Diagnostics, system status register */
>>> +#define ADIS16201_DIAG_STAT 0x3C
>>> +
>>> +/* Operation, system command register */
>>> +#define ADIS16201_GLOB_CMD 0x3E
>>> +
>>> +/* MSC_CTRL */
>>> +
>>> +/* Self-test enable */
>>> +#define ADIS16201_MSC_CTRL_SELF_TEST_EN BIT(8)
>>> +
>>> +/* Data-ready enable: 1 = enabled, 0 = disabled */
>>> +#define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
>>> +
>>> +/* Data-ready polarity: 1 = active high, 0 = active low */
>>> +#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
>>> +
>>> +/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
>>> +#define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
>>> +
>>> +/* DIAG_STAT */
>>> +
>>> +/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
>>> +#define ADIS16201_DIAG_STAT_ALARM2 BIT(9)
>>> +
>>> +/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
>>> +#define ADIS16201_DIAG_STAT_ALARM1 BIT(8)
>>> +
>>> +/* SPI communications failure */
>>> +#define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
>>> +
>>> +/* Flash update failure */
>>> +#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
>>> +
>>> +/* Power supply above 3.625 V */
>>> +#define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
>>> +
>>> +/* Power supply below 3.15 V */
>>> +#define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
>>> +
>>> +/* GLOB_CMD */
>>> +
>>> +#define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
>>> +#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
>>> +
>>> +#define ADIS16201_ERROR_ACTIVE BIT(14)
>>> +
>>> +enum adis16201_scan {
>>> + ADIS16201_SCAN_ACC_X,
>>> + ADIS16201_SCAN_ACC_Y,
>>> + ADIS16201_SCAN_INCLI_X,
>>> + ADIS16201_SCAN_INCLI_Y,
>>> + ADIS16201_SCAN_SUPPLY,
>>> + ADIS16201_SCAN_AUX_ADC,
>>> + ADIS16201_SCAN_TEMP,
>>> +};
>>> +
>>> +#endif /* SPI_ADIS16201_H_ */
>>>
>>> static const u8 adis16201_addresses[] = {
>>> [ADIS16201_SCAN_ACC_X] = ADIS16201_XACCL_OFFS,
>>>
>>
>
More information about the devel
mailing list