[PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates

Steve Longerbeam slongerbeam at gmail.com
Mon Feb 20 23:47:39 UTC 2017



On 02/20/2017 02:56 PM, Steve Longerbeam wrote:
>
>
> On 02/20/2017 02:04 PM, Sakari Ailus wrote:
>> Hi Steve,
>>
>> On Wed, Feb 15, 2017 at 06:19:31PM -0800, Steve Longerbeam wrote:
>>> From: Russell King <rmk+kernel at armlinux.org.uk>
>>>
>>> Setting and getting frame rates is part of the negotiation mechanism
>>> between subdevs.  The lack of support means that a frame rate at the
>>> sensor can't be negotiated through the subdev path.
>>
>> Just wondering --- what do you need this for?
>
>
> Hi Sakari,
>
> i.MX does need the ability to negotiate the frame rates in the
> pipelines. The CSI has the ability to skip frames at the output,
> which is something Philipp added to the CSI subdev. That affects
> frame interval at the CSI output.
>
> But as Russell pointed out, the lack of [gs]_frame_interval op
> causes media-ctl to fail:
>
> media-ctl -v -d /dev/media1 --set-v4l2
> '"imx6-mipi-csi2":1[fmt:SGBRG8/512x512 at 1/30]'
>
> Opening media device /dev/media1
> Enumerating entities
> Found 29 entities
> Enumerating pads and links
> Setting up format SGBRG8 512x512 on pad imx6-mipi-csi2/1
> Format set: SGBRG8 512x512
> Setting up frame interval 1/30 on entity imx6-mipi-csi2
> Unable to set frame interval: Inappropriate ioctl for device (-25)Unable
> to setup formats: Inappropriate ioctl for device (25)
>
>
> So i.MX needs to implement this op in every subdev in the
> pipeline, otherwise it's not possible to configure the
> pipeline with media-ctl.
>


Hi Russell,

But Sakari brings up a good point. The mipi csi-2 receiver doesn't
have any control over frame rate, so why do you even need to
give it this information via media-ctl?

Steve



More information about the devel mailing list