[Outreachy kernel] [PATCH 3/3] staging: rtl8192u: Prefer using the BIT macro
Julia Lawall
julia.lawall at lip6.fr
Thu Feb 16 21:15:06 UTC 2017
On Fri, 17 Feb 2017, simran singhal wrote:
> This is a nonfunctional change, declare register bit values with BIT()
> helper macro.
>
> Fix the checkpatch.pl issue:
> CHECK: Prefer using the BIT macro replacing
> bit shifting on 1 with the BIT(x) macro.
>
> The BIT() macro will make all the constants explicitly 'unsigned', which
> helps to avoid the warning.
I don't think that checkpatch knows the type of anything. It's a perl
script that uses regular expressions to match the source code. It doesn't
give the warning because it sees BIT.
julia
>
> Signed-off-by: simran singhal <singhalsimran0 at gmail.com>
> ---
> drivers/staging/rtl8192u/ieee80211/ieee80211.h | 140 ++++++++++++-------------
> 1 file changed, 70 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
> index a020e04..648806b 100644
> --- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
> +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
> @@ -502,28 +502,28 @@ do { if (ieee80211_debug_level & (level)) \
> *
> */
>
> -#define IEEE80211_DL_INFO (1<<0)
> -#define IEEE80211_DL_WX (1<<1)
> -#define IEEE80211_DL_SCAN (1<<2)
> -#define IEEE80211_DL_STATE (1<<3)
> -#define IEEE80211_DL_MGMT (1<<4)
> -#define IEEE80211_DL_FRAG (1<<5)
> -#define IEEE80211_DL_EAP (1<<6)
> -#define IEEE80211_DL_DROP (1<<7)
> -
> -#define IEEE80211_DL_TX (1<<8)
> -#define IEEE80211_DL_RX (1<<9)
> -
> -#define IEEE80211_DL_HT (1<<10) //HT
> -#define IEEE80211_DL_BA (1<<11) //ba
> -#define IEEE80211_DL_TS (1<<12) //TS
> -#define IEEE80211_DL_QOS (1<<13)
> -#define IEEE80211_DL_REORDER (1<<14)
> -#define IEEE80211_DL_IOT (1<<15)
> -#define IEEE80211_DL_IPS (1<<16)
> -#define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
> -#define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
> -#define IEEE80211_DL_ERR (1<<31) //always open
> +#define IEEE80211_DL_INFO BIT(0)
> +#define IEEE80211_DL_WX BIT(1)
> +#define IEEE80211_DL_SCAN BIT(2)
> +#define IEEE80211_DL_STATE BIT(3)
> +#define IEEE80211_DL_MGMT BIT(4)
> +#define IEEE80211_DL_FRAG BIT(5)
> +#define IEEE80211_DL_EAP BIT(6)
> +#define IEEE80211_DL_DROP BIT(7)
> +
> +#define IEEE80211_DL_TX BIT(8)
> +#define IEEE80211_DL_RX BIT(9)
> +
> +#define IEEE80211_DL_HT BIT(10) //HT
> +#define IEEE80211_DL_BA BIT(11) //ba
> +#define IEEE80211_DL_TS BIT(12) //TS
> +#define IEEE80211_DL_QOS BIT(13)
> +#define IEEE80211_DL_REORDER BIT(14)
> +#define IEEE80211_DL_IOT BIT(15)
> +#define IEEE80211_DL_IPS BIT(16)
> +#define IEEE80211_DL_TRACE BIT(29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
> +#define IEEE80211_DL_DATA BIT(30) //use this flag to control whether print data buf out.
> +#define IEEE80211_DL_ERR BIT(31) //always open
> #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
> #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
> #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
> @@ -625,18 +625,18 @@ struct ieee80211_snap_hdr {
> #define IEEE80211_OFDM_RATE_54MB 0x6C
> #define IEEE80211_BASIC_RATE_MASK 0x80
>
> -#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
> -#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
> -#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
> -#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
> -#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
> -#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
> -#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
> -#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
> -#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
> -#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
> -#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
> -#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
> +#define IEEE80211_CCK_RATE_1MB_MASK BIT(0)
> +#define IEEE80211_CCK_RATE_2MB_MASK BIT(1)
> +#define IEEE80211_CCK_RATE_5MB_MASK BIT(2)
> +#define IEEE80211_CCK_RATE_11MB_MASK BIT(3)
> +#define IEEE80211_OFDM_RATE_6MB_MASK BIT(4)
> +#define IEEE80211_OFDM_RATE_9MB_MASK BIT(5)
> +#define IEEE80211_OFDM_RATE_12MB_MASK BIT(6)
> +#define IEEE80211_OFDM_RATE_18MB_MASK BIT(7)
> +#define IEEE80211_OFDM_RATE_24MB_MASK BIT(8)
> +#define IEEE80211_OFDM_RATE_36MB_MASK BIT(9)
> +#define IEEE80211_OFDM_RATE_48MB_MASK BIT(10)
> +#define IEEE80211_OFDM_RATE_54MB_MASK BIT(11)
>
> #define IEEE80211_CCK_RATES_MASK 0x0000000F
> #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
> @@ -794,16 +794,16 @@ struct ieee80211_device;
>
> #include "ieee80211_crypt.h"
>
> -#define SEC_KEY_1 (1<<0)
> -#define SEC_KEY_2 (1<<1)
> -#define SEC_KEY_3 (1<<2)
> -#define SEC_KEY_4 (1<<3)
> -#define SEC_ACTIVE_KEY (1<<4)
> -#define SEC_AUTH_MODE (1<<5)
> -#define SEC_UNICAST_GROUP (1<<6)
> -#define SEC_LEVEL (1<<7)
> -#define SEC_ENABLED (1<<8)
> -#define SEC_ENCRYPT (1<<9)
> +#define SEC_KEY_1 BIT(0)
> +#define SEC_KEY_2 BIT(1)
> +#define SEC_KEY_3 BIT(2)
> +#define SEC_KEY_4 BIT(3)
> +#define SEC_ACTIVE_KEY BIT(4)
> +#define SEC_AUTH_MODE BIT(5)
> +#define SEC_UNICAST_GROUP BIT(6)
> +#define SEC_LEVEL BIT(7)
> +#define SEC_ENABLED BIT(8)
> +#define SEC_ENCRYPT BIT(9)
>
> #define SEC_LEVEL_0 0 /* None */
> #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
> @@ -1069,23 +1069,23 @@ typedef union _frameqos {
>
> #define MAX_WPA_IE_LEN 64
>
> -#define NETWORK_EMPTY_ESSID (1<<0)
> -#define NETWORK_HAS_OFDM (1<<1)
> -#define NETWORK_HAS_CCK (1<<2)
> +#define NETWORK_EMPTY_ESSID BIT(0)
> +#define NETWORK_HAS_OFDM BIT(1)
> +#define NETWORK_HAS_CCK BIT(2)
>
> /* QoS structure */
> -#define NETWORK_HAS_QOS_PARAMETERS (1<<3)
> -#define NETWORK_HAS_QOS_INFORMATION (1<<4)
> +#define NETWORK_HAS_QOS_PARAMETERS BIT(3)
> +#define NETWORK_HAS_QOS_INFORMATION BIT(4)
> #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
> NETWORK_HAS_QOS_INFORMATION)
> /* 802.11h */
> -#define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
> -#define NETWORK_HAS_CSA (1<<6)
> -#define NETWORK_HAS_QUIET (1<<7)
> -#define NETWORK_HAS_IBSS_DFS (1<<8)
> -#define NETWORK_HAS_TPC_REPORT (1<<9)
> +#define NETWORK_HAS_POWER_CONSTRAINT BIT(5)
> +#define NETWORK_HAS_CSA BIT(6)
> +#define NETWORK_HAS_QUIET BIT(7)
> +#define NETWORK_HAS_IBSS_DFS BIT(8)
> +#define NETWORK_HAS_TPC_REPORT BIT(9)
>
> -#define NETWORK_HAS_ERP_VALUE (1<<10)
> +#define NETWORK_HAS_ERP_VALUE BIT(10)
>
> #define QOS_QUEUE_NUM 4
> #define QOS_OUI_LEN 3
> @@ -1434,9 +1434,9 @@ enum ieee80211_state {
> #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
> #define DEFAULT_FTS 2346
>
> -#define CFG_IEEE80211_RESERVE_FCS (1<<0)
> -#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
> -#define CFG_IEEE80211_RTS (1<<2)
> +#define CFG_IEEE80211_RESERVE_FCS BIT(0)
> +#define CFG_IEEE80211_COMPUTE_FCS BIT(1)
> +#define CFG_IEEE80211_RTS BIT(2)
>
> #define IEEE80211_24GHZ_MIN_CHANNEL 1
> #define IEEE80211_24GHZ_MAX_CHANNEL 14
> @@ -2007,11 +2007,11 @@ struct ieee80211_device {
> u8 priv[0];
> };
>
> -#define IEEE_A (1<<0)
> -#define IEEE_B (1<<1)
> -#define IEEE_G (1<<2)
> -#define IEEE_N_24G (1<<4)
> -#define IEEE_N_5G (1<<5)
> +#define IEEE_A BIT(0)
> +#define IEEE_B BIT(1)
> +#define IEEE_G BIT(2)
> +#define IEEE_N_24G BIT(4)
> +#define IEEE_N_5G BIT(5)
> #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
>
> /* Generate a 802.11 header */
> @@ -2019,31 +2019,31 @@ struct ieee80211_device {
> /* Uses the channel change callback directly
> * instead of [start/stop] scan callbacks
> */
> -#define IEEE_SOFTMAC_SCAN (1<<2)
> +#define IEEE_SOFTMAC_SCAN BIT(2)
>
> /* Perform authentication and association handshake */
> -#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
> +#define IEEE_SOFTMAC_ASSOCIATE BIT(3)
>
> /* Generate probe requests */
> -#define IEEE_SOFTMAC_PROBERQ (1<<4)
> +#define IEEE_SOFTMAC_PROBERQ BIT(4)
>
> /* Generate respones to probe requests */
> -#define IEEE_SOFTMAC_PROBERS (1<<5)
> +#define IEEE_SOFTMAC_PROBERS BIT(5)
>
> /* The ieee802.11 stack will manages the netif queue
> * wake/stop for the driver, taking care of 802.11
> * fragmentation. See softmac.c for details. */
> -#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
> +#define IEEE_SOFTMAC_TX_QUEUE BIT(7)
>
> /* Uses only the softmac_data_hard_start_xmit
> * even for TX management frames.
> */
> -#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
> +#define IEEE_SOFTMAC_SINGLE_QUEUE BIT(8)
>
> /* Generate beacons. The stack will enqueue beacons
> * to the card
> */
> -#define IEEE_SOFTMAC_BEACONS (1<<6)
> +#define IEEE_SOFTMAC_BEACONS BIT(6)
>
> static inline void *ieee80211_priv(struct net_device *dev)
> {
> --
> 2.7.4
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe at googlegroups.com.
> To post to this group, send email to outreachy-kernel at googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170216211145.GA3185%40singhal-Inspiron-5558.
> For more options, visit https://groups.google.com/d/optout.
>
More information about the devel
mailing list