[PATCH 08/18] staging: typec: fusb302: Add support for USB2 charger detection through extcon

Hans de Goede hdegoede at redhat.com
Sun Aug 6 12:35:45 UTC 2017


The fusb302 port-controller relies on an external device doing USB2
charger-type detection.

The Intel Whiskey Cove PMIC with which the fusb302 is combined on some
X86/ACPI platforms already has a charger-type detection driver which
uses extcon to communicate the detected charger-type.

This commit uses the tcpm_get_usb2_current_limit_extcon helper to enable
USB2 charger detection on these systems. Note that the "fcs,extcon-name"
property name is only for kernel internal use by X86/ACPI platform code
and as such is NOT documented in the devicetree bindings.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/staging/typec/fusb302/fusb302.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index be454b5ff6c7..1d8c9b66df2f 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1201,6 +1201,8 @@ static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
 {
 	fusb302_tcpc_dev->init = tcpm_init;
 	fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
+	fusb302_tcpc_dev->get_usb2_current_limit =
+		tcpm_get_usb2_current_limit_extcon;
 	fusb302_tcpc_dev->set_cc = tcpm_set_cc;
 	fusb302_tcpc_dev->get_cc = tcpm_get_cc;
 	fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
@@ -1685,6 +1687,7 @@ static int fusb302_probe(struct i2c_client *client,
 	struct fusb302_chip *chip;
 	struct i2c_adapter *adapter;
 	struct device *dev = &client->dev;
+	const char *name;
 	int ret = 0;
 	u32 val;
 
@@ -1717,6 +1720,19 @@ static int fusb302_probe(struct i2c_client *client,
 	if (device_property_read_u32(dev, "fcs,operating-snk-mw", &val) == 0)
 		chip->tcpc_config.operating_snk_mw = val;
 
+	/*
+	 * Devicetree platforms should get extcon via phandle (not yet
+	 * supported). On ACPI platforms, we get the name from a device prop.
+	 * This device prop is for kernel internal use only and is expected
+	 * to be set by the platform code which also registers the i2c client
+	 * for the fusb302.
+	 */
+	if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) {
+		chip->tcpc_dev.usb2_extcon = extcon_get_extcon_dev(name);
+		if (!chip->tcpc_dev.usb2_extcon)
+			return -EPROBE_DEFER;
+	}
+
 	ret = fusb302_debugfs_init(chip);
 	if (ret < 0)
 		return ret;
-- 
2.13.3



More information about the devel mailing list