[PATCH v6 02/39] [media] dt-bindings: Add bindings for i.MX media driver

Russell King - ARM Linux linux at armlinux.org.uk
Mon Apr 3 15:03:42 UTC 2017


On Mon, Apr 03, 2017 at 09:11:35AM -0500, Rob Herring wrote:
> On Wed, Mar 29, 2017 at 09:39:05AM +0100, Russell King - ARM Linux wrote:
> > On Tue, Mar 28, 2017 at 07:21:34PM -0500, Rob Herring wrote:
> > > On Mon, Mar 27, 2017 at 7:40 PM, Steve Longerbeam <slongerbeam at gmail.com> wrote:
> > > > Add bindings documentation for the i.MX media driver.
> > > >
> > > > Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
> > > > ---
> > > >  Documentation/devicetree/bindings/media/imx.txt | 74 +++++++++++++++++++++++++
> > > >  1 file changed, 74 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/media/imx.txt
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
> > > > new file mode 100644
> > > > index 0000000..3059c06
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/media/imx.txt
> > > > @@ -0,0 +1,74 @@
> > > > +Freescale i.MX Media Video Device
> > > > +=================================
> > > > +
> > > > +Video Media Controller node
> > > > +---------------------------
> > > > +
> > > > +This is the media controller node for video capture support. It is a
> > > > +virtual device that lists the camera serial interface nodes that the
> > > > +media device will control.
> > > > +
> > > > +Required properties:
> > > > +- compatible : "fsl,imx-capture-subsystem";
> > > > +- ports      : Should contain a list of phandles pointing to camera
> > > > +               sensor interface ports of IPU devices
> > > > +
> > > > +example:
> > > > +
> > > > +capture-subsystem {
> > > > +       compatible = "fsl,imx-capture-subsystem";
> > > > +       ports = <&ipu1_csi0>, <&ipu1_csi1>;
> > > > +};
> > > > +
> > > > +fim child node
> > > > +--------------
> > > > +
> > > > +This is an optional child node of the ipu_csi port nodes. If present and
> > > > +available, it enables the Frame Interval Monitor. Its properties can be
> > > > +used to modify the method in which the FIM measures frame intervals.
> > > > +Refer to Documentation/media/v4l-drivers/imx.rst for more info on the
> > > > +Frame Interval Monitor.
> > > > +
> > > > +Optional properties:
> > > > +- fsl,input-capture-channel: an input capture channel and channel flags,
> > > > +                            specified as <chan flags>. The channel number
> > > > +                            must be 0 or 1. The flags can be
> > > > +                            IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, or
> > > > +                            IRQ_TYPE_EDGE_BOTH, and specify which input
> > > > +                            capture signal edge will trigger the input
> > > > +                            capture event. If an input capture channel is
> > > > +                            specified, the FIM will use this method to
> > > > +                            measure frame intervals instead of via the EOF
> > > > +                            interrupt. The input capture method is much
> > > > +                            preferred over EOF as it is not subject to
> > > > +                            interrupt latency errors. However it requires
> > > > +                            routing the VSYNC or FIELD output signals of
> > > > +                            the camera sensor to one of the i.MX input
> > > > +                            capture pads (SD1_DAT0, SD1_DAT1), which also
> > > > +                            gives up support for SD1.
> > > > +
> > > > +
> > > > +mipi_csi2 node
> > > > +--------------
> > > > +
> > > > +This is the device node for the MIPI CSI-2 Receiver, required for MIPI
> > > > +CSI-2 sensors.
> > > > +
> > > > +Required properties:
> > > > +- compatible   : "fsl,imx6-mipi-csi2", "snps,dw-mipi-csi2";
> > > 
> > > As I mentioned in v5, there's a DW CSI2 binding in progress. This
> > > needs to be based on that.
> > 
> > Maybe someone can provide some kind of reference to it, and it's
> > associated driver?
> 
> Let me Google that for you (TM). The reference is in my comments on v5. 
> Here's a reference to it [1].

Looking at the actual driver, it seems to at least have a different
register layout:

register	imx6	dw
version		0x000	0x000
n_lanes		0x004	0x004
phy_shutdownz	0x008	-
dphy_resetz	0x00c	-
resetn		0x010	0x008
phy_state	0x014	-
data_ids_1	0x018	0x010
data_ids_2	0x01c	0x014
err1		0x020	-
err2		0x024	-
msk1		0x028	-
msk2		0x02c	-
phy_tst_ctrl0	0x030	-
phy_tst_ctrl1	0x034	-
sft_reset	0xf00	-	(not part of CSI2, but a IMX6 specific
				CSI2 to IPU gasket layer, but lives in
				CSI2's register region)

The DW version has many more registers than are documented by the iMX6
version.  Only the first two registers appear to be common between these
two devices, and maybe five registers exist (I haven't checked whether
their bit layouts are the same though.)

So, I would say that these are two different devices.

As for the bindings, the differences are:

compatible:	dw uses "snps,dw-mipi-csi"
		imx6 uses "fsl,imx6-mipi-csi2", "snps,dw-mipi-csi2"

reg:		dw and imx6 both use a single base address

interrupts:	dw requires one interrupt, imx6 has up to two interrupts

output-type:	relevant for DW, meaningless on imx6 (not documented)

phys:		DW seems to specify a separate PHY, on imx6 the PHY
		control/status is tightly integrated into the CSI2
		register set, and the PHY itself is undocumented except
		for some specific programming documented in source code.

resets:		DW lists this under "required", but suffixes it with
		(optional), so is it optional or is it not?
		Meaningless on imx6.

port:		imx6 requires this, and must specify all (5) connectivity -
		one node to connect to the camera, and four nodes connecting
		to the rest of the capture system.

		dw specifies only one port node to be connected to the
		camera.

		dw document is unclear whether this is an optional or
		required property.  imx6 requires all five nodes.

clocks, 	imx6 requires the clocks and clock names to be specified,
clock-names:	dw requires no clocks.  DW binding would need these to be
		optional.

So, the only common properties are "reg" and maybe "interrupts".

The DW binding also looks specific to the SoC implementation - the lack
of any specification in it as to how the module relates to other parts
of the capture system _appears_ to mean that its relationship with those
other parts can't be established from DT.  That's a problem when it comes
to iMX6, because the CSI2 relationship to the one or two IPU units depends
on the SoC (whether it's a single/dual-lite or dual/quad version.)

Therefore, it does not make sense to (a) use the same compatible, or
(b) use the same binding.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.


More information about the devel mailing list