[PATCH 2/2] staging: vc04_services: Replace dmac_map_area with dmac_map_sg
Eric Anholt
eric at anholt.net
Mon Oct 24 17:31:52 UTC 2016
mzoran at crowfest.net writes:
> From: Michael Zoran <mzoran at crowfest.net>
>
> The original arm implementation uses dmac_map_area which is not
> portable. Replace it with an architecture neutral version
> which uses dma_map_sg.
>
> As you can see that for larger page sizes, the dma_map_sg
> implementation is faster then the original unportable dma_map_area
> implementation.
>
> Test dmac_map_area dma_map_page dma_map_sg
> vchiq_test -b 4 10000 51us/iter 76us/iter 76us
> vchiq_test -b 8 10000 70us/iter 82us/iter 91us
> vchiq_test -b 16 10000 94us/iter 118us/iter 121us
> vchiq_test -b 32 10000 146us/iter 173us/iter 187us
> vchiq_test -b 64 10000 263us/iter 328us/iter 299us
> vchiq_test -b 128 10000 529us/iter 631us/iter 595us
> vchiq_test -b 256 10000 2285us/iter 2275us/iter 2001us
> vchiq_test -b 512 10000 4372us/iter 4616us/iter 4123us
>
> For message sizes >= 64KB, dma_map_sg is faster then dma_map_page.
>
> For message size >= 256KB, the dma_map_sg is the fastest
> implementation.
>
> Signed-off-by: Michael Zoran <mzoran at crowfest.net>
> ---
> .../interface/vchiq_arm/vchiq_2835_arm.c | 153 ++++++++++++---------
> 1 file changed, 91 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
> index 98c6819..5ca66ee 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
> @@ -45,13 +45,8 @@
> #include <asm/pgtable.h>
> #include <soc/bcm2835/raspberrypi-firmware.h>
>
> -#define dmac_map_area __glue(_CACHE,_dma_map_area)
> -#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
> -
> #define TOTAL_SLOTS (VCHIQ_SLOT_ZERO_SLOTS + 2 * 32)
>
> -#define VCHIQ_ARM_ADDRESS(x) ((void *)((char *)x + g_virt_to_bus_offset))
> -
> #include "vchiq_arm.h"
> #include "vchiq_2835.h"
> #include "vchiq_connected.h"
> @@ -73,7 +68,7 @@ static unsigned int g_fragments_size;
> static char *g_fragments_base;
> static char *g_free_fragments;
> static struct semaphore g_free_fragments_sema;
> -static unsigned long g_virt_to_bus_offset;
> +static struct device *g_dev;
>
> extern int vchiq_arm_log_level;
>
> @@ -84,10 +79,11 @@ vchiq_doorbell_irq(int irq, void *dev_id);
>
> static int
> create_pagelist(char __user *buf, size_t count, unsigned short type,
> - struct task_struct *task, PAGELIST_T ** ppagelist);
> + struct task_struct *task, PAGELIST_T **ppagelist,
> + dma_addr_t *dma_addr);
>
> static void
> -free_pagelist(PAGELIST_T *pagelist, int actual);
> +free_pagelist(dma_addr_t dma_addr, PAGELIST_T *pagelist, int actual);
>
> int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state)
> {
> @@ -101,8 +97,6 @@ int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state)
> int slot_mem_size, frag_mem_size;
> int err, irq, i;
>
> - g_virt_to_bus_offset = virt_to_dma(dev, (void *)0);
> -
> (void)of_property_read_u32(dev->of_node, "cache-line-size",
> &g_cache_line_size);
> g_fragments_size = 2 * g_cache_line_size;
> @@ -118,7 +112,7 @@ int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state)
> return -ENOMEM;
> }
>
> - WARN_ON(((int)slot_mem & (PAGE_SIZE - 1)) != 0);
> + WARN_ON(((unsigned long)slot_mem & (PAGE_SIZE - 1)) != 0);
>
> vchiq_slot_zero = vchiq_init_slots(slot_mem, slot_mem_size);
> if (!vchiq_slot_zero)
> @@ -170,6 +164,7 @@ int vchiq_platform_init(struct platform_device *pdev, VCHIQ_STATE_T *state)
> return err ? : -ENXIO;
> }
>
> + g_dev = dev;
> vchiq_log_info(vchiq_arm_log_level,
> "vchiq_init - done (slots %pK, phys %pad)",
> vchiq_slot_zero, &slot_phys);
> @@ -233,6 +228,7 @@ vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk, VCHI_MEM_HANDLE_T memhandle,
> {
> PAGELIST_T *pagelist;
> int ret;
> + dma_addr_t dma_addr;
>
> WARN_ON(memhandle != VCHI_MEM_HANDLE_INVALID);
>
> @@ -241,12 +237,14 @@ vchiq_prepare_bulk_data(VCHIQ_BULK_T *bulk, VCHI_MEM_HANDLE_T memhandle,
> ? PAGELIST_READ
> : PAGELIST_WRITE,
> current,
> - &pagelist);
> + &pagelist,
> + &dma_addr);
> +
> if (ret != 0)
> return VCHIQ_ERROR;
>
> bulk->handle = memhandle;
> - bulk->data = VCHIQ_ARM_ADDRESS(pagelist);
> + bulk->data = (void *)(unsigned long)dma_addr;
>
> /* Store the pagelist address in remote_data, which isn't used by the
> slave. */
> @@ -259,7 +257,8 @@ void
> vchiq_complete_bulk(VCHIQ_BULK_T *bulk)
> {
> if (bulk && bulk->remote_data && bulk->actual)
> - free_pagelist((PAGELIST_T *)bulk->remote_data, bulk->actual);
> + free_pagelist((dma_addr_t)(unsigned long)bulk->data,
> + (PAGELIST_T *)bulk->remote_data, bulk->actual);
> }
>
> void
> @@ -353,38 +352,44 @@ vchiq_doorbell_irq(int irq, void *dev_id)
> ** obscuring the new data underneath. We can solve this by transferring the
> ** partial cache lines separately, and allowing the ARM to copy into the
> ** cached area.
> -
> -** N.B. This implementation plays slightly fast and loose with the Linux
> -** driver programming rules, e.g. its use of dmac_map_area instead of
> -** dma_map_single, but it isn't a multi-platform driver and it benefits
> -** from increased speed as a result.
> */
>
> static int
> create_pagelist(char __user *buf, size_t count, unsigned short type,
> - struct task_struct *task, PAGELIST_T ** ppagelist)
> + struct task_struct *task, PAGELIST_T **ppagelist,
> + dma_addr_t *dma_addr)
> {
> PAGELIST_T *pagelist;
> struct page **pages;
> - unsigned long *addrs;
> - unsigned int num_pages, offset, i;
> - char *addr, *base_addr, *next_addr;
> - int run, addridx, actual_pages;
> + u32 *addrs;
> + unsigned int num_pages, offset, i, j, k;
> + int actual_pages;
> unsigned long *need_release;
> + size_t pagelist_size;
> + struct scatterlist *scatterlist;
> + int dma_buffers;
> + int dir;
>
> - offset = (unsigned int)buf & (PAGE_SIZE - 1);
> + offset = ((unsigned int)(unsigned long)buf & (PAGE_SIZE - 1));
> num_pages = (count + offset + PAGE_SIZE - 1) / PAGE_SIZE;
>
> + pagelist_size = sizeof(PAGELIST_T) +
> + (num_pages * sizeof(unsigned long)) +
> + sizeof(unsigned long) +
> + (num_pages * sizeof(pages[0]) +
> + (num_pages * sizeof(struct scatterlist)));
> +
> *ppagelist = NULL;
>
> + dir = (type == PAGELIST_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
> +
> /* Allocate enough storage to hold the page pointers and the page
> ** list
> */
> - pagelist = kmalloc(sizeof(PAGELIST_T) +
> - (num_pages * sizeof(unsigned long)) +
> - sizeof(unsigned long) +
> - (num_pages * sizeof(pages[0])),
> - GFP_KERNEL);
> + pagelist = dma_zalloc_coherent(g_dev,
> + pagelist_size,
> + dma_addr,
> + GFP_KERNEL);
>
> vchiq_log_trace(vchiq_arm_log_level, "create_pagelist - %pK",
> pagelist);
> @@ -394,10 +399,9 @@ create_pagelist(char __user *buf, size_t count, unsigned short type,
> addrs = pagelist->addrs;
> need_release = (unsigned long *)(addrs + num_pages);
> pages = (struct page **)(addrs + num_pages + 1);
> + scatterlist = (struct scatterlist *)(pages + num_pages);
>
> if (is_vmalloc_addr(buf)) {
> - int dir = (type == PAGELIST_WRITE) ?
> - DMA_TO_DEVICE : DMA_FROM_DEVICE;
> unsigned long length = count;
> unsigned int off = offset;
>
> @@ -410,7 +414,6 @@ create_pagelist(char __user *buf, size_t count, unsigned short type,
> if (bytes > length)
> bytes = length;
> pages[actual_pages] = pg;
> - dmac_map_area(page_address(pg) + off, bytes, dir);
> length -= bytes;
> off = 0;
> }
> @@ -438,7 +441,8 @@ create_pagelist(char __user *buf, size_t count, unsigned short type,
> actual_pages--;
> put_page(pages[actual_pages]);
> }
> - kfree(pagelist);
> + dma_free_coherent(g_dev, pagelist_size,
> + pagelist, *dma_addr);
> if (actual_pages == 0)
> actual_pages = -ENOMEM;
> return actual_pages;
> @@ -450,29 +454,38 @@ create_pagelist(char __user *buf, size_t count, unsigned short type,
> pagelist->type = type;
> pagelist->offset = offset;
>
> - /* Group the pages into runs of contiguous pages */
> -
> - base_addr = VCHIQ_ARM_ADDRESS(page_address(pages[0]));
> - next_addr = base_addr + PAGE_SIZE;
> - addridx = 0;
> - run = 0;
> -
> - for (i = 1; i < num_pages; i++) {
> - addr = VCHIQ_ARM_ADDRESS(page_address(pages[i]));
> - if ((addr == next_addr) && (run < (PAGE_SIZE - 1))) {
> - next_addr += PAGE_SIZE;
> - run++;
> - } else {
> - addrs[addridx] = (unsigned long)base_addr + run;
> - addridx++;
> - base_addr = addr;
> - next_addr = addr + PAGE_SIZE;
> - run = 0;
> - }
> + for (i = 0; i < num_pages; i++)
> + sg_set_page(scatterlist + i, pages[i], PAGE_SIZE, 0);
> +
> + dma_buffers = dma_map_sg(g_dev,
> + scatterlist,
> + num_pages,
> + dir);
> +
> + if (dma_buffers == 0) {
> + dma_free_coherent(g_dev, pagelist_size,
> + pagelist, *dma_addr);
> +
> + return -EINTR;
> }
>
> - addrs[addridx] = (unsigned long)base_addr + run;
> - addridx++;
> + k = 0;
> + for (i = 0; i < dma_buffers;) {
> + u32 section_length = 0;
> +
> + for (j = i + 1; j < dma_buffers; j++) {
> + if (sg_dma_address(scatterlist + j) !=
> + sg_dma_address(scatterlist + j - 1) + PAGE_SIZE) {
> + break;
> + }
> + section_length++;
> + }
> +
> + addrs[k] = (u32)sg_dma_address(scatterlist + i) |
> + section_length;
It looks like scatterlist may not be just an array, so I think this
whole loop wants to be something like:
for_each_sg(scatterlist, sg, num_pages, i) {
u32 len = sg_dma_len(sg);
u32 addr = sg_dma_address(sg);
if (k > 0 && addrs[k - 1] & PAGE_MASK +
(addrs[k - 1] & ~PAGE_MASK) << PAGE_SHIFT) == addr) {
addrs[k - 1] += len;
} else {
addrs[k++] = addr | len;
}
}
Note the use of sg_dma_len(), since sg entries may be more than one
page. I don't think any merging is actually happening on our platform
currently, thus why I left the inner loop.
Thanks for taking on doing this conversion! This code's going to be so
much nicer when you're done.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 800 bytes
Desc: not available
URL: <http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/attachments/20161024/e8f7cc75/attachment-0001.asc>
More information about the devel
mailing list