[PATCH] slicoss: Remove unused macros
Greg KH
gregkh at linuxfoundation.org
Sun May 1 21:06:46 UTC 2016
On Sun, May 01, 2016 at 09:59:40PM +0100, Colin Pitrat wrote:
> Staging: slicoss: remove unused macros.
That's an odd changelog text, looks like a subject line instead :(
> Signed-off-by: Colin Pitrat <colin.pitrat at gmail.com>
We need a blank line between your changelog text (which you don't have)
and the signed-off-by line please.
> ---
> drivers/staging/slicoss/TODO | 2 -
> drivers/staging/slicoss/slic.h | 43 ---------------
> drivers/staging/slicoss/slichw.h | 107 +-------------------------------------
> drivers/staging/slicoss/slicoss.c | 22 ++------
> 4 files changed, 6 insertions(+), 168 deletions(-)
>
> diff --git a/drivers/staging/slicoss/TODO b/drivers/staging/slicoss/TODO
> index 9019729..7e5dbc7 100644
> --- a/drivers/staging/slicoss/TODO
> +++ b/drivers/staging/slicoss/TODO
> @@ -11,8 +11,6 @@ TODO:
> - without CONFIG_X86_64 confusion
> - do 64 bit correctly
> - don't depend on order of union
> - - get rid of ASSERT(), use BUG() instead but only where necessary
> - looks like most aren't really useful
Why did you remove this? If you did this task, just do this task, don't
do multiple things in the same patch, it makes it impossible to review.
> - no new SIOCDEVPRIVATE ioctl allowed
> - don't use module_param for configuring interrupt mitigation
> use ethtool instead
> diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
> index cc0afee..7b20a0f 100644
> --- a/drivers/staging/slicoss/slic.h
> +++ b/drivers/staging/slicoss/slic.h
> @@ -54,7 +54,6 @@
> #define GB_RCVUCODE_VERS_DATE "2006/03/27 15:12:15"
> static u32 OasisRcvUCodeLen = 512;
> static u32 GBRcvUCodeLen = 512;
> -#define SECTION_SIZE 65536
>
> #define SLIC_RSPQ_PAGES_GB 10
> #define SLIC_RSPQ_BUFSINPAGE (PAGE_SIZE / SLIC_RSPBUF_SIZE)
> @@ -117,14 +116,7 @@ struct slic_handle {
> };
>
> #define SLIC_HANDLE_FREE 0x0000
> -#define SLIC_HANDLE_DATA 0x0001
> #define SLIC_HANDLE_CMD 0x0002
> -#define SLIC_HANDLE_CONTEXT 0x0003
> -#define SLIC_HANDLE_TEAM 0x0004
> -
> -#define handle_index handle.parts.index
> -#define handle_bottom handle.parts.bottombits
> -#define handle_token handle.whole
>
> #define SLIC_HOSTCMD_SIZE 512
>
> @@ -173,35 +165,19 @@ struct mcast_address {
>
> #define CARD_DOWN 0x00000000
> #define CARD_UP 0x00000001
> -#define CARD_FAIL 0x00000002
> -#define CARD_DIAG 0x00000003
> -#define CARD_SLEEP 0x00000004
>
> #define ADAPT_DOWN 0x00
> #define ADAPT_UP 0x01
> -#define ADAPT_FAIL 0x02
> -#define ADAPT_RESET 0x03
> -#define ADAPT_SLEEP 0x04
>
> -#define ADAPT_FLAGS_BOOTTIME 0x0001
> -#define ADAPT_FLAGS_IS64BIT 0x0002
> -#define ADAPT_FLAGS_PENDINGLINKDOWN 0x0004
> #define ADAPT_FLAGS_FIBERMEDIA 0x0008
> -#define ADAPT_FLAGS_LOCKS_ALLOCED 0x0010
> -#define ADAPT_FLAGS_INT_REGISTERED 0x0020
> -#define ADAPT_FLAGS_LOAD_TIMER_SET 0x0040
> -#define ADAPT_FLAGS_STATS_TIMER_SET 0x0080
> -#define ADAPT_FLAGS_RESET_TIMER_SET 0x0100
>
> #define LINK_DOWN 0x00
> -#define LINK_CONFIG 0x01
> #define LINK_UP 0x02
>
> #define LINK_10MB 0x00
> #define LINK_100MB 0x01
> #define LINK_AUTOSPEED 0x02
> #define LINK_1000MB 0x03
> -#define LINK_10000MB 0x04
>
> #define LINK_HALFD 0x00
> #define LINK_FULLD 0x01
> @@ -214,9 +190,6 @@ struct mcast_address {
> #define MAC_LOOPBACK 0x00000010
> #define MAC_ALLMCAST 0x00000020
>
> -#define SLIC_DUPLEX(x) ((x == LINK_FULLD) ? "FDX" : "HDX")
> -#define SLIC_SPEED(x) ((x == LINK_100MB) ? "100Mb" : ((x == LINK_1000MB) ?\
> - "1000Mb" : " 10Mb"))
> #define SLIC_LINKSTATE(x) ((x == LINK_DOWN) ? "Down" : "Up ")
> #define SLIC_ADAPTER_STATE(x) ((x == ADAPT_UP) ? "UP" : "Down")
> #define SLIC_CARD_STATE(x) ((x == CARD_UP) ? "UP" : "Down")
> @@ -254,8 +227,6 @@ struct slicnet_stats {
> };
>
> #define SLIC_LOADTIMER_PERIOD 1
> -#define SLIC_INTAGG_DEFAULT 200
> -#define SLIC_LOAD_0 0
> #define SLIC_INTAGG_0 0
> #define SLIC_LOAD_1 8000
> #define SLIC_LOAD_2 10000
> @@ -267,16 +238,6 @@ struct slicnet_stats {
> #define SLIC_INTAGG_3 150
> #define SLIC_INTAGG_4 200
> #define SLIC_INTAGG_5 250
> -#define SLIC_LOAD_1GB 3000
> -#define SLIC_LOAD_2GB 6000
> -#define SLIC_LOAD_3GB 12000
> -#define SLIC_LOAD_4GB 24000
> -#define SLIC_LOAD_5GB 48000
> -#define SLIC_INTAGG_1GB 50
> -#define SLIC_INTAGG_2GB 75
> -#define SLIC_INTAGG_3GB 100
> -#define SLIC_INTAGG_4GB 100
> -#define SLIC_INTAGG_5GB 100
>
> struct ether_header {
> unsigned char ether_dhost[6];
> @@ -324,10 +285,6 @@ struct sliccard {
> u32 reg_valueh[32];
> };
>
> -#define NUM_CFG_SPACES 2
> -#define NUM_CFG_REGS 64
> -#define NUM_CFG_REG_ULONGS (NUM_CFG_REGS / sizeof(u32))
> -
> struct physcard {
> struct adapter *adapter[SLIC_MAX_PORTS];
> struct physcard *next;
> diff --git a/drivers/staging/slicoss/slichw.h b/drivers/staging/slicoss/slichw.h
> index 9723b4a..d832dbd 100644
> --- a/drivers/staging/slicoss/slichw.h
> +++ b/drivers/staging/slicoss/slichw.h
> @@ -96,7 +96,6 @@
> #define VRHSTATB_IPLERR 0x00020000
> #define VRHSTATB_IPHERR 0x00010000
> #define SLIC_MAX64_BCNT 23
> -#define SLIC_MAX32_BCNT 26
> #define IHCMD_XMT_REQ 0x01
> #define IHFLG_IFSHFT 2
> #define SLIC_RSPBUF_SIZE 32
> @@ -116,17 +115,14 @@
> #define ISR_UPCERR 0x01000000
> #define ISR_XDROP 0x00800000
> #define ISR_UPCBSY 0x00020000
> -#define ISR_EVMSK 0xffff0000
> #define ISR_PINGMASK 0x00700000
> #define ISR_PINGDSMASK 0x00710000
> -#define ISR_UPCMASK 0x11000000
> #define SLIC_WCS_START 0x80000000
> #define SLIC_WCS_COMPARE 0x40000000
> #define SLIC_RCVWCS_BEGIN 0x40000000
> #define SLIC_RCVWCS_FINISH 0x80000000
> #define SLIC_PM_MAXPATTERNS 6
> #define SLIC_PM_PATTERNSIZE 128
> -#define SLIC_PMCAPS_WAKEONLAN 0x00000001
> #define MIICR_REG_PCR 0x00000000
> #define MIICR_REG_4 0x00040000
> #define MIICR_REG_9 0x00090000
> @@ -138,7 +134,6 @@
> #define PCR_AUTONEG 0x1000
> #define PCR_AUTONEG_RST 0x0200
> #define PCR_DUPLEX_FULL 0x0100
> -#define PSR_LINKUP 0x0004
>
> #define PAR_ADV100FD 0x0100
> #define PAR_ADV100HD 0x0080
> @@ -148,41 +143,17 @@
> #define PAR_802_3 0x0001
>
> #define PAR_ADV1000XFD 0x0020
> -#define PAR_ADV1000XHD 0x0040
> #define PAR_ASYMPAUSE_FIBER 0x0180
>
> #define PGC_ADV1000FD 0x0200
> -#define PGC_ADV1000HD 0x0100
> -#define SEEQ_LINKFAIL 0x4000
> -#define SEEQ_SPEED 0x0080
> -#define SEEQ_DUPLEX 0x0040
> -#define TDK_DUPLEX 0x0800
> -#define TDK_SPEED 0x0400
> #define MRV_REG16_XOVERON 0x0068
> #define MRV_REG16_XOVEROFF 0x0008
> -#define MRV_SPEED_1000 0x8000
> -#define MRV_SPEED_100 0x4000
> -#define MRV_SPEED_10 0x0000
> -#define MRV_FULLDUPLEX 0x2000
> -#define MRV_LINKUP 0x0400
>
> #define GIG_LINKUP 0x0001
> #define GIG_FULLDUPLEX 0x0002
> -#define GIG_SPEED_MASK 0x000C
> #define GIG_SPEED_1000 0x0008
> #define GIG_SPEED_100 0x0004
> -#define GIG_SPEED_10 0x0000
> -
> -#define MCR_RESET 0x80000000
> -#define MCR_CRCEN 0x40000000
> -#define MCR_FULLD 0x10000000
> -#define MCR_PAD 0x02000000
> -#define MCR_RETRYLATE 0x01000000
> -#define MCR_BOL_SHIFT 21
> -#define MCR_IPG1_SHIFT 14
> -#define MCR_IPG2_SHIFT 7
> -#define MCR_IPG3_SHIFT 0
> -#define GMCR_RESET 0x80000000
> +
> #define GMCR_GBIT 0x20000000
> #define GMCR_FULLD 0x10000000
> #define GMCR_GAPBB_SHIFT 14
> @@ -197,7 +168,6 @@
> #define XCR_RESET 0x80000000
> #define XCR_XMTEN 0x40000000
> #define XCR_PAUSEEN 0x20000000
> -#define XCR_LOADRNG 0x10000000
> #define RCR_RESET 0x80000000
> #define RCR_RCVEN 0x40000000
> #define RCR_RCVALL 0x20000000
> @@ -216,11 +186,7 @@
> #define GRCR_HASHSIZE_SHIFT 17
> #define GRCR_HASHSIZE 14
>
> -#define SLIC_EEPROM_ID 0xA5A5
> -#define SLIC_SRAM_SIZE2GB (64 * 1024)
> -#define SLIC_SRAM_SIZE1GB (32 * 1024)
> #define SLIC_HOSTID_DEFAULT 0xFFFF /* uninitialized hostid */
> -#define SLIC_NBR_MACS 4
>
> struct slic_rcvbuf {
> u8 pad1[6];
> @@ -295,15 +261,12 @@ struct slic_regs {
>
> u32 slic_icr; /* Interrupt Control Register */
> u32 pad2;
> -#define SLIC_ICR 0x0008
>
> u32 slic_isp; /* Interrupt status pointer */
> u32 pad1;
> -#define SLIC_ISP 0x0010
>
> u32 slic_isr; /* Interrupt status */
> u32 pad3;
> -#define SLIC_ISR 0x0018
>
> u32 slic_hbar; /* Header buffer address reg */
> u32 pad4;
> @@ -312,15 +275,11 @@ struct slic_regs {
> * 7-0 - number of buffers passed
> * Buffers are 256 bytes long on 256-byte boundaries.
> */
> -#define SLIC_HBAR 0x0020
> -#define SLIC_HBAR_CNT_MSK 0x000000FF
>
> u32 slic_dbar; /* Data buffer handle & address reg */
> u32 pad5;
>
> /* 4 sets of registers; Buffers are 2K bytes long 2 per 4K page. */
> -#define SLIC_DBAR 0x0028
> -#define SLIC_DBAR_SIZE 2048
>
> u32 slic_cbar; /* Xmt Cmd buf addr regs.*/
> /*
> @@ -329,14 +288,9 @@ struct slic_regs {
> * 4-0 - length of cmd in multiples of 32 bytes
> * Buffers are 32 bytes up to 512 bytes long
> */
> -#define SLIC_CBAR 0x0030
> -#define SLIC_CBAR_LEN_MSK 0x0000001F
> -#define SLIC_CBAR_ALIGN 0x00000020
>
> u32 slic_wcs; /* write control store*/
> #define SLIC_WCS 0x0034
> -#define SLIC_WCS_START 0x80000000 /*Start the SLIC (Jump to WCS)*/
> -#define SLIC_WCS_COMPARE 0x40000000 /* Compare with value in WCS*/
>
> u32 slic_rbar; /* Response buffer address reg.*/
> u32 pad7;
> @@ -345,33 +299,24 @@ struct slic_regs {
> * 7-0 - number of buffers passed
> * Buffers are 32 bytes long on 32-byte boundaries.
> */
> -#define SLIC_RBAR 0x0038
> -#define SLIC_RBAR_CNT_MSK 0x000000FF
> -#define SLIC_RBAR_SIZE 32
>
> u32 slic_stats; /* read statistics (UPR) */
> u32 pad8;
> -#define SLIC_RSTAT 0x0040
>
> u32 slic_rlsr; /* read link status */
> u32 pad9;
> -#define SLIC_LSTAT 0x0048
>
> u32 slic_wmcfg; /* Write Mac Config */
> u32 pad10;
> -#define SLIC_WMCFG 0x0050
>
> u32 slic_wphy; /* Write phy register */
> u32 pad11;
> -#define SLIC_WPHY 0x0058
>
> u32 slic_rcbar; /* Rcv Cmd buf addr reg */
> u32 pad12;
> -#define SLIC_RCBAR 0x0060
>
> u32 slic_rconfig; /* Read SLIC Config*/
> u32 pad13;
> -#define SLIC_RCONFIG 0x0068
>
> u32 slic_intagg; /* Interrupt aggregation time */
> u32 pad14;
> @@ -379,117 +324,88 @@ struct slic_regs {
>
> u32 slic_wxcfg; /* Write XMIT config reg*/
> u32 pad16;
> -#define SLIC_WXCFG 0x0078
>
> u32 slic_wrcfg; /* Write RCV config reg*/
> u32 pad17;
> -#define SLIC_WRCFG 0x0080
>
> u32 slic_wraddral; /* Write rcv addr a low*/
> u32 pad18;
> -#define SLIC_WRADDRAL 0x0088
>
> u32 slic_wraddrah; /* Write rcv addr a high*/
> u32 pad19;
> -#define SLIC_WRADDRAH 0x0090
>
> u32 slic_wraddrbl; /* Write rcv addr b low*/
> u32 pad20;
> -#define SLIC_WRADDRBL 0x0098
>
> u32 slic_wraddrbh; /* Write rcv addr b high*/
> u32 pad21;
> -#define SLIC_WRADDRBH 0x00a0
>
> u32 slic_mcastlow; /* Low bits of mcast mask*/
> u32 pad22;
> -#define SLIC_MCASTLOW 0x00a8
>
> u32 slic_mcasthigh; /* High bits of mcast mask*/
> u32 pad23;
> -#define SLIC_MCASTHIGH 0x00b0
>
> u32 slic_ping; /* Ping the card*/
> u32 pad24;
> -#define SLIC_PING 0x00b8
>
> u32 slic_dump_cmd; /* Dump command */
> u32 pad25;
> -#define SLIC_DUMP_CMD 0x00c0
>
> u32 slic_dump_data; /* Dump data pointer */
> u32 pad26;
> -#define SLIC_DUMP_DATA 0x00c8
>
> u32 slic_pcistatus; /* Read card's pci_status register */
> u32 pad27;
> -#define SLIC_PCISTATUS 0x00d0
>
> u32 slic_wrhostid; /* Write hostid field */
> u32 pad28;
> -#define SLIC_WRHOSTID 0x00d8
> #define SLIC_RDHOSTID_1GB 0x1554
> #define SLIC_RDHOSTID_2GB 0x1554
>
> u32 slic_low_power; /* Put card in a low power state */
> u32 pad29;
> -#define SLIC_LOW_POWER 0x00e0
>
> u32 slic_quiesce; /* force slic into quiescent state
> * before soft reset
> */
> u32 pad30;
> -#define SLIC_QUIESCE 0x00e8
>
> u32 slic_reset_iface;/* reset interface queues */
> u32 pad31;
> -#define SLIC_RESET_IFACE 0x00f0
>
> u32 slic_addr_upper;/* Bits 63-32 for host i/f addrs */
> u32 pad32;
> -#define SLIC_ADDR_UPPER 0x00f8 /*Register is only written when it has changed*/
>
> u32 slic_hbar64; /* 64 bit Header buffer address reg */
> u32 pad33;
> -#define SLIC_HBAR64 0x0100
>
> u32 slic_dbar64; /* 64 bit Data buffer handle & address reg */
> u32 pad34;
> -#define SLIC_DBAR64 0x0108
>
> u32 slic_cbar64; /* 64 bit Xmt Cmd buf addr regs. */
> u32 pad35;
> -#define SLIC_CBAR64 0x0110
>
> u32 slic_rbar64; /* 64 bit Response buffer address reg.*/
> u32 pad36;
> -#define SLIC_RBAR64 0x0118
>
> u32 slic_rcbar64; /* 64 bit Rcv Cmd buf addr reg*/
> u32 pad37;
> -#define SLIC_RCBAR64 0x0120
>
> u32 slic_stats64; /* read statistics (64 bit UPR) */
> u32 pad38;
> -#define SLIC_RSTAT64 0x0128
>
> u32 slic_rcv_wcs; /*Download Gigabit RCV sequencer ucode*/
> u32 pad39;
> -#define SLIC_RCV_WCS 0x0130
> -#define SLIC_RCVWCS_BEGIN 0x40000000
> -#define SLIC_RCVWCS_FINISH 0x80000000
>
> u32 slic_wrvlanid; /* Write VlanId field */
> u32 pad40;
> -#define SLIC_WRVLANID 0x0138
>
> u32 slic_read_xf_info; /* Read Transformer info */
> u32 pad41;
> -#define SLIC_READ_XF_INFO 0x0140
>
> u32 slic_write_xf_info; /* Write Transformer info */
> u32 pad42;
> -#define SLIC_WRITE_XF_INFO 0x0148
>
> u32 RSVD1; /* TOE Only */
> u32 pad43;
> @@ -505,7 +421,6 @@ struct slic_regs {
>
> u32 slic_ticks_per_sec; /* Write card ticks per second */
> u32 pad47;
> -#define SLIC_TICKS_PER_SEC 0x0170
> };
>
> enum UPR_REQUEST {
> @@ -616,19 +531,6 @@ struct slic_stats {
> } u;
> };
>
> -#define xmit_tcp_segs100 u.stats_100.xmt100.xmit_tcp_segs
> -#define xmit_tcp_bytes100 u.stats_100.xmt100.xmit_tcp_bytes
> -#define xmit_bytes100 u.stats_100.xmt100.xmit_bytes
> -#define xmit_collisions100 u.stats_100.xmt100.xmit_collisions
> -#define xmit_unicasts100 u.stats_100.xmt100.xmit_unicasts
> -#define xmit_other_error100 u.stats_100.xmt100.xmit_other_error
> -#define xmit_excess_collisions100 u.stats_100.xmt100.xmit_excess_collisions
> -#define rcv_tcp_segs100 u.stats_100.rcv100.rcv_tcp_segs
> -#define rcv_tcp_bytes100 u.stats_100.rcv100.rcv_tcp_bytes
> -#define rcv_bytes100 u.stats_100.rcv100.rcv_bytes
> -#define rcv_unicasts100 u.stats_100.rcv100.rcv_unicasts
> -#define rcv_other_error100 u.stats_100.rcv100.rcv_other_error
> -#define rcv_drops100 u.stats_100.rcv100.rcv_drops
> #define xmit_tcp_segs_gb u.stats_GB.xmtGB.xmit_tcp_segs
> #define xmit_tcp_bytes_gb u.stats_GB.xmtGB.xmit_tcp_bytes
> #define xmit_bytes_gb u.stats_GB.xmtGB.xmit_bytes
> @@ -648,13 +550,6 @@ struct slic_config_mac {
> u8 macaddrA[6];
> };
>
> -#define ATK_FRU_FORMAT 0x00
> -#define VENDOR1_FRU_FORMAT 0x01
> -#define VENDOR2_FRU_FORMAT 0x02
> -#define VENDOR3_FRU_FORMAT 0x03
> -#define VENDOR4_FRU_FORMAT 0x04
> -#define NO_FRU_FORMAT 0xFF
> -
> struct atk_fru {
> u8 assembly[6];
> u8 revision[2];
> diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
> index 6d50fc4..a33eca0 100644
> --- a/drivers/staging/slicoss/slicoss.c
> +++ b/drivers/staging/slicoss/slicoss.c
> @@ -55,13 +55,9 @@
> */
>
> #define KLUDGE_FOR_4GB_BOUNDARY 1
> -#define DEBUG_MICROCODE 1
> -#define DBG 1
Are you sure you can remove these?
> #define SLIC_INTERRUPT_PROCESS_LIMIT 1
> #define SLIC_OFFLOAD_IP_CHECKSUM 1
> -#define STATS_TIMER_INTERVAL 2
> #define PING_TIMER_INTERVAL 1
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
You can't delete that line! You just changed the dmesg output :(
Why delete all of these things anyway? What is it helping with?
thanks,
greg k-h
More information about the devel
mailing list