[PATCH] staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility

Hartley Sweeten HartleyS at visionengravers.com
Wed Jul 20 15:55:45 UTC 2016


On Tuesday, July 19, 2016 4:18 AM, Ian Abbott wrote:
> Commit ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the
> cmd->start_arg validation and use") introduced a backwards compatibility
> issue in the use of asynchronous commands on the AO subdevice when
> `start_src` is `TRIG_EXT`.  Valid values for `start_src` are `TRIG_INT`
> (for internal, software trigger), and `TRIG_EXT` (for external trigger).
> When set to `TRIG_EXT`.  In both cases, the driver relies on an
> internal, software trigger to set things up (allowing the user
> application to write sufficient samples to the data buffer before the
> trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case.
> The software trigger is handled by `ni_ao_inttrig()`.
>
> Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg`
> was required to be 0, and `ni_ao_inttrig()` checked that the software
> trigger number was also 0.  After the above change, when `start_src` was
> `TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()`
> checked that the software trigger number matched this `start_arg` value.
> The backwards compatibility issue is that the internal trigger number
> now has to match `start_arg` when `start_src` is `TRIG_EXT` when it
> previously had to be 0.
>
> Fix the backwards compatibility issue in `ni_ao_inttrig()` by always
> allowing software trigger number 0 when `start_src` is something other
> than `TRIG_INT`.
>
> Thanks to Spencer Olson for reporting the issue.
>
> Signed-off-by: Ian Abbott <abbotti at mev.co.uk>
> Reported-by: Spencer Olson <olsonse at umich.edu>
> Fixes: ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the
>   cmd->start_arg validation and use")
> ---
>  drivers/staging/comedi/drivers/ni_mio_common.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
> index 8dabb19..9f4036f 100644
> --- a/drivers/staging/comedi/drivers/ni_mio_common.c
> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
> @@ -2772,7 +2772,15 @@ static int ni_ao_inttrig(struct comedi_device *dev,
>  	int i;
>  	static const int timeout = 1000;
>  
> -	if (trig_num != cmd->start_arg)
> +	/*
> +	 * Require trig_num == cmd->start_arg when cmd->start_src == TRIG_INT.
> +	 * For backwards compatibility, also allow trig_num == 0 when
> +	 * cmd->start_src != TRIG_INT (i.e. when cmd->start_src == TRIG_EXT);
> +	 * in that case, the internal trigger is being used as a pre-trigger
> +	 * before the external trigger.
> +	 */
> +	if (!(trig_num == cmd->start_arg ||
> +	      (trig_num == 0 && cmd->start_src != TRIG_INT)))
>  		return -EINVAL;

Ian,

I think this test is a bit clearer:

+	/*
+	 * Require trig_num == cmd->start_arg when cmd->start_src == TRIG_INT.
+	 * For backwards compatibility, any trig_num is valid when
+	 * cmd->start_src != TRIG_INT (i.e. when cmd->start_src == TRIG_EXT);
+	 * in that case, the internal trigger is being used as a pre-trigger
+	 * before the external trigger.
+	 */
+	if (cmd->start_src == TRIG_INT && trig_num != cmd->start_arg)
		return -EINVAL;

But, either way:

Reviewed-by: H Hartley Sweeten <hsweeten at visionengravers.com>

Thanks!



More information about the devel mailing list