[PATCH v2 1/1] staging: coding style cleanups for staging/iio/light/tsl2583 driver
Bijosh Thykkoottathil
bijosh.t at hotmail.com
Sun Feb 28 08:24:33 UTC 2016
This patch fixes following coding style warning reported by check patch script,
in tsl2583 driver:
- Block comments use a trailing */ on a separate line
Signed-off-by: Bijosh Thykkoottathil <bijosh.t at hotmail.com>
---
drivers/staging/iio/light/tsl2583.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 3100d96..9159298 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -241,7 +241,8 @@ static int taos_get_lux(struct iio_dev *indio_dev)
}
/* clear status, really interrupt status (interrupts are off), but
- * we use the bit anyway - don't forget 0x80 - this is a command*/
+ * we use the bit anyway - don't forget 0x80 - this is a command
+ */
ret = i2c_smbus_write_byte(chip->client,
(TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
TSL258X_CMD_ALS_INT_CLR));
@@ -430,7 +431,8 @@ static int taos_chip_on(struct iio_dev *indio_dev)
chip->als_time_scale = (als_time + 25) / 50;
/* TSL258x Specific power-on / adc enable sequence
- * Power on the device 1st. */
+ * Power on the device 1st.
+ */
utmp = TSL258X_CNTL_PWR_ON;
ret = i2c_smbus_write_byte_data(chip->client,
TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
@@ -440,7 +442,8 @@ static int taos_chip_on(struct iio_dev *indio_dev)
}
/* Use the following shadow copy for our delay before enabling ADC.
- * Write all the registers. */
+ * Write all the registers.
+ */
for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
ret = i2c_smbus_write_byte_data(chip->client,
TSL258X_CMD_REG + i,
@@ -454,7 +457,8 @@ static int taos_chip_on(struct iio_dev *indio_dev)
usleep_range(3000, 3500);
/* NOW enable the ADC
- * initialize the desired mode of operation */
+ * initialize the desired mode of operation
+ */
utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
ret = i2c_smbus_write_byte_data(chip->client,
TSL258X_CMD_REG | TSL258X_CNTRL,
@@ -696,7 +700,8 @@ static ssize_t taos_luxtable_show(struct device *dev,
taos_device_lux[i].ch1);
if (taos_device_lux[i].ratio == 0) {
/* We just printed the first "0" entry.
- * Now get rid of the extra "," and break. */
+ * Now get rid of the extra "," and break.
+ */
offset--;
break;
}
--
2.1.4
More information about the devel
mailing list